Arduino DB9 RS232 RF Wireless Bluetooth Module HC-06 Slave Serial Port

Arduino DB9 RS232 RF Wireless Bluetooth Module HC-06 Slave Serial Port

SKU:010120
Regular price $6.59

shipped within one bussiness day

Features:
1. Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
 2. Default serail port setting : 9600, N, 8, 1
3. Pairing code : 1234
4. Running in slave role: Pair with BT dongle and master module
5. Coupled Mode: Two modules will establish communication automatically when powered.
6. PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.

Parameters:
1. Bluetooth protocal : Bluetooth Specification v2.0+EDR
2. Frequency : 2.4GHz ISM band
3. Modulation : GFSK(Gaussian Frequency Shift Keying)
4. Emission power : <=4dBm, Class 2
5. Sensitivity : <=-84dBm at 0.1% BER
6. Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
7. Security : Authentication and encryption
8. Profiles : Bluetooth serial port
9. CSR chip : Bluetooth v2.0
10. Wave band : 2.4GHz-2.8GHz, ISM Band
11. Protocol : Bluetooth V2.0
12. Power Class : (+6dbm)
13. Reception sensitivity: -85dBm
14. Voltage : 3.3 (2.7V-4.2V)
15. Current : Paring - 35mA, Connected - 8mA
16. Temperature : -40~ +105 Degrees Celsius
17. User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,460800,921600 ,1382400.
18. Dimension : 26.9mm*13mm*2.2mm

Pin definition:
1. PIO8 connects with LED cathodea with 470ohm series resistor in between. LED NEGATIVE connects to ground. It is used to indicate the module state. After powered on, flashing intervals differ in different states.
2. PIO9 is used to control LED indicating paring. It will be steady on when paring is successful.
3. PIO11, module state switching pin. HIGH -> response to AT command; LOW or floating -> regular work status.
4. With build-in reset circuit, reset is completed automatically after powered on.
5. Steps to set to MASTER:
6. Set PIO11 HIGH with a 10K resistor in between.
7. Power on, module comes into AT Command Response Status
8. Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow

Control Method:
1. Via serial port, send characters "AT + ROLE = 1 r n",if successful, return "OK r n", where r n is carriage return.
2. Set PIO11 LOW, re-power, then in Master state, automatically search for slave module and connect
 
Package Included:
1*Arduino DB9 RS232 RF Wireless Bluetooth Module
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Features:
1. Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc.
 2. Default serail port setting : 9600, N, 8, 1
3. Pairing code : 1234
4. Running in slave role: Pair with BT dongle and master module
5. Coupled Mode: Two modules will establish communication automatically when powered.
6. PC hosted mode: Pair the module with bluetooth dongle directly as virtual serial.

Parameters:
1. Bluetooth protocal : Bluetooth Specification v2.0+EDR
2. Frequency : 2.4GHz ISM band
3. Modulation : GFSK(Gaussian Frequency Shift Keying)
4. Emission power : <=4dBm, Class 2
5. Sensitivity : <=-84dBm at 0.1% BER
6. Speed : Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
7. Security : Authentication and encryption
8. Profiles : Bluetooth serial port
9. CSR chip : Bluetooth v2.0
10. Wave band : 2.4GHz-2.8GHz, ISM Band
11. Protocol : Bluetooth V2.0
12. Power Class : (+6dbm)
13. Reception sensitivity: -85dBm
14. Voltage : 3.3 (2.7V-4.2V)
15. Current : Paring - 35mA, Connected - 8mA
16. Temperature : -40~ +105 Degrees Celsius
17. User defined Baud rate : 4800, 9600, 19200, 38400, 57600, 115200, 230400,460800,921600 ,1382400.
18. Dimension : 26.9mm*13mm*2.2mm

Pin definition:
1. PIO8 connects with LED cathodea with 470ohm series resistor in between. LED NEGATIVE connects to ground. It is used to indicate the module state. After powered on, flashing intervals differ in different states.
2. PIO9 is used to control LED indicating paring. It will be steady on when paring is successful.
3. PIO11, module state switching pin. HIGH -> response to AT command; LOW or floating -> regular work status.
4. With build-in reset circuit, reset is completed automatically after powered on.
5. Steps to set to MASTER:
6. Set PIO11 HIGH with a 10K resistor in between.
7. Power on, module comes into AT Command Response Status
8. Open HyperTerminal or other serial tool, set the baud rate 38400, 8 data bits, 1 stop bit, no parity bit, no Flow

Control Method:
1. Via serial port, send characters "AT + ROLE = 1 r n",if successful, return "OK r n", where r n is carriage return.
2. Set PIO11 LOW, re-power, then in Master state, automatically search for slave module and connect
 
Package Included:
1*Arduino DB9 RS232 RF Wireless Bluetooth Module

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Free Shipping
All order over $50.00
Money Come Back
All order over $50.00
Member Discount
All order over $50.00
24/7 Support
All order over $50.00
Gift Voucher
All order over $50.00