L3GD20 3-axis Gyroscope Sensor Module GY50

L3GD20 3-axis Gyroscope Sensor Module GY50

SKU:010024
Regular price $3.55

shipped within one bussiness day

 

  

The L3GD20 is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.

It also operates at voltages below 3.6 V, which can make interfacing difficult for microcontrollers operating at 5 V.

This breakout board addresses these issues by incorporating additional electronics, including a 3.3 V voltage regulator and level-shifting circuits,

while keeping the overall size as compact as possible. The board ships fully populated with its SMD components,

including the L3GD20, as shown in the product picture.

 

 

Compared to the L3G4200D, the L3GD20 uses a higher resonant frequency that makes it more resistant to audio noise and vibrations.

This board remains pin-compatible with the original L3G4200D carrier, although changes in I⊃2;C addresses and configuration registers mean that code written to interface with an L3G4200D might need to be modified to work with an L3GD20.

 

 

The L3GD20 has many configurable options, including three selectable angular rate sensitivities, a choice of output data rates,

an embedded FIFO for buffering output data, and a programmable external interrupt signal.

The three angular velocity readings are available through a digital interface, which can be configured to operate in either I⊃2;C or SPI mode.

 

 

The board includes a low-dropout linear voltage regulator that provides the 3.3 V required by the L3GD20, which allows the sensor to be powered from a 2.5-5.5 V supply. The regulator output is available on the VDD pin and can supply almost 150 mA to external devices.

The breakout board also includes a circuit that shifts the I⊃2;C/SPI clock and data in lines to the same logic voltage level as the supplied VIN,

making it simple to interface the board with 5 V systems, and the board's 0.1 pin spacing makes it easy to use with standard solderless breadboards and 0.1 perfboards.

 

 

Features:

  • Dimensions: 0.5 × 0.9 × 0.1 (13 × 23 × 3 mm)
  • Weight without header pins: 0.7 g (0.03 oz)
  • Operating voltage: 2.5 to 5.5 V
  • Supply current: 7 mA
  • Output format (I⊃2;C/SPI): one 16-bit reading per axis
  • Sensitivity range (configurable): ±250°/s, ±500°/s, or ±2000°/s
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

  

The L3GD20 is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.

It also operates at voltages below 3.6 V, which can make interfacing difficult for microcontrollers operating at 5 V.

This breakout board addresses these issues by incorporating additional electronics, including a 3.3 V voltage regulator and level-shifting circuits,

while keeping the overall size as compact as possible. The board ships fully populated with its SMD components,

including the L3GD20, as shown in the product picture.

 

 

Compared to the L3G4200D, the L3GD20 uses a higher resonant frequency that makes it more resistant to audio noise and vibrations.

This board remains pin-compatible with the original L3G4200D carrier, although changes in I⊃2;C addresses and configuration registers mean that code written to interface with an L3G4200D might need to be modified to work with an L3GD20.

 

 

The L3GD20 has many configurable options, including three selectable angular rate sensitivities, a choice of output data rates,

an embedded FIFO for buffering output data, and a programmable external interrupt signal.

The three angular velocity readings are available through a digital interface, which can be configured to operate in either I⊃2;C or SPI mode.

 

 

The board includes a low-dropout linear voltage regulator that provides the 3.3 V required by the L3GD20, which allows the sensor to be powered from a 2.5-5.5 V supply. The regulator output is available on the VDD pin and can supply almost 150 mA to external devices.

The breakout board also includes a circuit that shifts the I⊃2;C/SPI clock and data in lines to the same logic voltage level as the supplied VIN,

making it simple to interface the board with 5 V systems, and the board's 0.1 pin spacing makes it easy to use with standard solderless breadboards and 0.1 perfboards.

 

 

Features:

  • Dimensions: 0.5 × 0.9 × 0.1 (13 × 23 × 3 mm)
  • Weight without header pins: 0.7 g (0.03 oz)
  • Operating voltage: 2.5 to 5.5 V
  • Supply current: 7 mA
  • Output format (I⊃2;C/SPI): one 16-bit reading per axis
  • Sensitivity range (configurable): ±250°/s, ±500°/s, or ±2000°/s

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.