5V USB 4 Channel Automation Relay Computer Control for Arduino PIC DSP AVR+Cable

5V USB 4 Channel Automation Relay Computer Control for Arduino PIC DSP AVR+Cable

SKU:012495
Regular price $15.99

Overview:
This is USB controlled relay module with 4 relays SRD-05VDC-SL-C. You may use it for simple ON/OFF switching electrical devices - home lights, DC motors, solenodis and others. It may help you building projects like robotics and home automation. Each such board requires one USB port. The more USB ports you have the more Relay boards you may connect. You may use it with our software (universal software for all our relay boards).

Features:
  • 4 SPDT relays SRD-05VDC-SL-C
  • Relay specification – 10A 250VAC/10A 125VAC/10A 30VDC /10A 28VDC
  • Power Supply - 5VDC
  • Current consumption - 200 mA
  • FT245RL. Datasheet –( http://www.ftdichip.com/)
  • Led for each relay output
  • Power Led
  • USb led
  • Size - 101*40*16mm
  • Supported by our Software
  • PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask
  • Extra PCB openings for better voltage isolation
  • Doubled high current tracks

Important:
When the board is connected to the PC and the PC is restarted, the relays will be toggled several times. This is because of the structure of the FTDI chip.
The device must be supplied with 5VDC or order to work.
There is no protection against reversed voltage! If the VCC(+5V) and GND are reversed the board will be damaged!
The board can not work without computer
Supply characteristics
Type:SRD-5VDC-SL-C

Package Included:
1 x 4-channel 5V USB Relay Board(With cable)

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Overview:
This is USB controlled relay module with 4 relays SRD-05VDC-SL-C. You may use it for simple ON/OFF switching electrical devices - home lights, DC motors, solenodis and others. It may help you building projects like robotics and home automation. Each such board requires one USB port. The more USB ports you have the more Relay boards you may connect. You may use it with our software (universal software for all our relay boards).

Features:
  • 4 SPDT relays SRD-05VDC-SL-C
  • Relay specification – 10A 250VAC/10A 125VAC/10A 30VDC /10A 28VDC
  • Power Supply - 5VDC
  • Current consumption - 200 mA
  • FT245RL. Datasheet –( http://www.ftdichip.com/)
  • Led for each relay output
  • Power Led
  • USb led
  • Size - 101*40*16mm
  • Supported by our Software
  • PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask
  • Extra PCB openings for better voltage isolation
  • Doubled high current tracks

Important:
When the board is connected to the PC and the PC is restarted, the relays will be toggled several times. This is because of the structure of the FTDI chip.
The device must be supplied with 5VDC or order to work.
There is no protection against reversed voltage! If the VCC(+5V) and GND are reversed the board will be damaged!
The board can not work without computer
Supply characteristics
Type:SRD-5VDC-SL-C

Package Included:
1 x 4-channel 5V USB Relay Board(With cable)

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.