Expansion Shield Module
$5.99
{"id":2411448401978,"title":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V for Arduino ESP32 ESP8266","handle":"18650-battery-shield-v8-mobile-power-bank-3v-5v-for-arduino-esp32-esp8266-wifi","description":"\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\" data-spm-anchor-id=\"a2g0o.detail.1000023.i0.f0bb1f20n3hleS\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis module is a portable mobile power supply that supports 3V \/ 1A and 5V \/ 2.2A two voltage outputs!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMICRO USB charging current 600mA-800mA,\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecial attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/files\/01_1.jpg?v=1717397995\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003cbr\u003eMicro USB port Input\u003cbr\u003eType-A USB Output\u003cbr\u003e0.5A current charging\u003cbr\u003e1 switch control USB output\u003cbr\u003e5~8V Input Voltage\u003cbr\u003e3V \u0026amp; 1A Output\u003cbr\u003e5V \u0026amp; 2A Output\u003cbr\u003eLED indicate(Green means full,Red means charging)\u003cbr\u003e3V output port x3\u003cbr\u003e5V output port x3\u003cbr\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003cbr\u003eIf you put wrong direction, charging chip will be destroyed.\u003cbr\u003eThis product does not include 18650 battery\u003cbr\u003e\u003cbr\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003cbr\u003eQuantity: 1 Set\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1lFpXaULrK1Rjy1zbq6AenFXaO.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1YhtcaUzrK1RjSspmq6AOdFXaE.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB13vM9asfrK1Rjy0Fmq6xhEXXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDescription:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e100% brand new and high quality\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh Speed USB 2.0 Cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompatible with Cellphones, GPS systems, PDAs, OTG devices and digital cameras\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCable lenght: 30CM\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eComplies with fully rated cable specification using braid-and-foil shield protection\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 30CM USB A to Micro USB B 5pin Cable provides one USB A Male connector, and one Micro USB B connector to create a simple way to connect mobile devices to a USB capable computer for every day tasks such as data synchronization and file transfers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe micro-USB connector is smaller and thinner than the previous USB Mini-b standard while offering better performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1407wavLsK1Rjy0Fbq6xSEXXaf.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1smXXaIrrK1RjSspaq6AREXXaJ.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-05-17T15:42:29+08:00","created_at":"2019-05-17T15:48:10+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["1865","18650","Arduino","ESP32","ESP8266","Shield"],"price":599,"price_min":599,"price_max":999,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":31153246699591,"title":"V8","option1":"V8","option2":null,"option3":null,"sku":"X13129","requires_shipping":true,"taxable":false,"featured_image":{"id":41511064469720,"product_id":2411448401978,"position":9,"created_at":"2024-06-03T15:04:27+08:00","updated_at":"2024-06-03T15:04:29+08:00","alt":null,"width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1_c838052c-bc22-407f-a0e4-9c374a299704.jpg?v=1717398269","variant_ids":[31153246699591]},"available":true,"name":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V for Arduino ESP32 ESP8266 - V8","public_title":"V8","options":["V8"],"price":999,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":null,"id":34630724026584,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1_c838052c-bc22-407f-a0e4-9c374a299704.jpg?v=1717398269"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31153246732359,"title":"V3","option1":"V3","option2":null,"option3":null,"sku":"012590","requires_shipping":true,"taxable":false,"featured_image":{"id":14505782083655,"product_id":2411448401978,"position":1,"created_at":"2020-05-05T14:20:36+08:00","updated_at":"2020-05-05T14:21:10+08:00","alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Expansion Module","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670","variant_ids":[31153246732359]},"available":true,"name":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V for Arduino ESP32 ESP8266 - V3","public_title":"V3","options":["V3"],"price":999,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Expansion Module","id":6678966173767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":31153246765127,"title":"Micro USB Cable","option1":"Micro USB Cable","option2":null,"option3":null,"sku":"050098","requires_shipping":true,"taxable":false,"featured_image":{"id":14505783623751,"product_id":2411448401978,"position":5,"created_at":"2020-05-05T14:21:09+08:00","updated_at":"2020-05-05T14:21:10+08:00","alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Micro Usb Cable","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/050098_1_309.jpg?v=1588659670","variant_ids":[31153246765127]},"available":true,"name":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V for Arduino ESP32 ESP8266 - Micro USB Cable","public_title":"Micro USB Cable","options":["Micro USB Cable"],"price":599,"weight":36,"compare_at_price":null,"inventory_management":null,"barcode":"","featured_media":{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Micro Usb Cable","id":6678967451719,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/050098_1_309.jpg?v=1588659670"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_10_743.jpg?v=1588659670","\/\/www.diymore.cc\/cdn\/shop\/products\/X13129_13_853.jpg?v=1588659670","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_272.jpg?v=1588659670","\/\/www.diymore.cc\/cdn\/shop\/products\/050098_1_309.jpg?v=1588659670","\/\/www.diymore.cc\/cdn\/shop\/files\/01_1.jpg?v=1717397995","\/\/www.diymore.cc\/cdn\/shop\/files\/01_9.jpg?v=1717397982","\/\/www.diymore.cc\/cdn\/shop\/files\/01_14.jpg?v=1717397979","\/\/www.diymore.cc\/cdn\/shop\/files\/01_1_c838052c-bc22-407f-a0e4-9c374a299704.jpg?v=1717398269"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670","options":["Type"],"media":[{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Expansion Module","id":6678966173767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_651.jpg?v=1588659670","width":1000},{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi V3 Expansion Module","id":6678966960199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_10_743.jpg?v=1588659670"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_10_743.jpg?v=1588659670","width":1000},{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Protection Board","id":6678966992967,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13129_13_853.jpg?v=1588659670"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X13129_13_853.jpg?v=1588659670","width":1000},{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Expansion Module","id":6678967320647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_272.jpg?v=1588659670"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_272.jpg?v=1588659670","width":1000},{"alt":"18650 Battery Shield V8 Mobile Power Bank 3V\/5V For Arduino Esp32 Esp8266 Wifi Micro Usb Cable","id":6678967451719,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/050098_1_309.jpg?v=1588659670"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/050098_1_309.jpg?v=1588659670","width":1000},{"alt":null,"id":34630676742360,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1.jpg?v=1717397995"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1.jpg?v=1717397995","width":1000},{"alt":null,"id":34630674448600,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_9.jpg?v=1717397982"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_9.jpg?v=1717397982","width":1000},{"alt":null,"id":34630672744664,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_14.jpg?v=1717397979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_14.jpg?v=1717397979","width":1000},{"alt":null,"id":34630724026584,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1_c838052c-bc22-407f-a0e4-9c374a299704.jpg?v=1717398269"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/files\/01_1_c838052c-bc22-407f-a0e4-9c374a299704.jpg?v=1717398269","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\" data-spm-anchor-id=\"a2g0o.detail.1000023.i0.f0bb1f20n3hleS\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis module is a portable mobile power supply that supports 3V \/ 1A and 5V \/ 2.2A two voltage outputs!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMICRO USB charging current 600mA-800mA,\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSupports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSpecial attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/files\/01_1.jpg?v=1717397995\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003cbr\u003eMicro USB port Input\u003cbr\u003eType-A USB Output\u003cbr\u003e0.5A current charging\u003cbr\u003e1 switch control USB output\u003cbr\u003e5~8V Input Voltage\u003cbr\u003e3V \u0026amp; 1A Output\u003cbr\u003e5V \u0026amp; 2A Output\u003cbr\u003eLED indicate(Green means full,Red means charging)\u003cbr\u003e3V output port x3\u003cbr\u003e5V output port x3\u003cbr\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003cbr\u003eIf you put wrong direction, charging chip will be destroyed.\u003cbr\u003eThis product does not include 18650 battery\u003cbr\u003e\u003cbr\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003cbr\u003eQuantity: 1 Set\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1lFpXaULrK1Rjy1zbq6AenFXaO.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1YhtcaUzrK1RjSspmq6AOdFXaE.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB13vM9asfrK1Rjy0Fmq6xhEXXaz.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDescription:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e100% brand new and high quality\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eHigh Speed USB 2.0 Cable\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompatible with Cellphones, GPS systems, PDAs, OTG devices and digital cameras\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCable lenght: 30CM\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eComplies with fully rated cable specification using braid-and-foil shield protection\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis 30CM USB A to Micro USB B 5pin Cable provides one USB A Male connector, and one Micro USB B connector to create a simple way to connect mobile devices to a USB capable computer for every day tasks such as data synchronization and file transfers.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe micro-USB connector is smaller and thinner than the previous USB Mini-b standard while offering better performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1407wavLsK1Rjy0Fbq6xSEXXaf.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1smXXaIrrK1RjSspaq6AREXXaJ.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$6.99
{"id":2420198801466,"title":"Micro USB 16340 lithium Battery Shield Mobile Power Holder Adapter For Arduino","handle":"micro-usb-16340-lithium-battery-shield-mobile-power-holder-adapter-for-arduino","description":"\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003e16340 mobile power battery holder module specification\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 1.Adapter 16340 lithium battery;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 2. 5V and 3.3V dual output;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 3.Built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage and short circuit protection;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 4.Built-in battery anti-reverse protection;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 5.The toggle switch can freely turn the output.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003eTechnical Parameters:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging interface: MicroUSB (Android port)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging voltage: 4.5V~5.5V\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging current: 580mA max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eOutput interface: 2.5mm header and standard USB socket\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e5V output current: 1.3A max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e3.3V output current: 1.0A max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging indicator: red light during charging, full green light\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eProduct size: length 60mm * width 28mm * height 16mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 20px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003ePackage included：\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 1PCS \u003cspan style=\"font-size: 18px;\"\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003e16340 Mobile Power Battery Holder Module \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e","published_at":"2019-05-23T12:16:34+08:00","created_at":"2019-05-23T12:21:44+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Shield"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23233072627770,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12969","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro USB 16340 lithium Battery Shield Mobile Power Holder Adapter For Arduino","public_title":null,"options":["Default Title"],"price":699,"weight":15,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_2_574.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_4_590.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_800.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_1_294.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_3_567.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_8d24e68c-1d04-4d9d-96bd-e1fd3e463497_240.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_8_189.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_9_265.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_10_311.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_11_984.jpg?v=1588659711","\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_12_174.jpg?v=1588659711"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_2_574.jpg?v=1588659711","options":["Title"],"media":[{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678967812167,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_2_574.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_2_574.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678967943239,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_4_590.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_4_590.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678968139847,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_800.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_800.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678968795207,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_1_294.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_1_294.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678968827975,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_3_567.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_3_567.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678968959047,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_8d24e68c-1d04-4d9d-96bd-e1fd3e463497_240.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_6_8d24e68c-1d04-4d9d-96bd-e1fd3e463497_240.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678969221191,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_8_189.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_8_189.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678969286727,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_9_265.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_9_265.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678969483335,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_10_311.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_10_311.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678969647175,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_11_984.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_11_984.jpg?v=1588659711","width":1000},{"alt":"Micro Usb 16340 Lithium Battery Shield Mobile Power Holder Adapter For Arduino Module","id":6678969778247,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_12_174.jpg?v=1588659711"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12969_12_174.jpg?v=1588659711","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003e16340 mobile power battery holder module specification\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 1.Adapter 16340 lithium battery;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 2. 5V and 3.3V dual output;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 3.Built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage and short circuit protection;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 4.Built-in battery anti-reverse protection;\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 5.The toggle switch can freely turn the output.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003eTechnical Parameters:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging interface: MicroUSB (Android port)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging voltage: 4.5V~5.5V\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging current: 580mA max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eOutput interface: 2.5mm header and standard USB socket\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e5V output current: 1.3A max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e3.3V output current: 1.0A max\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eCharging indicator: red light during charging, full green light\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003eProduct size: length 60mm * width 28mm * height 16mm.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 20px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003ePackage included：\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-family: times new roman, times; font-size: 18px;\"\u003e 1PCS \u003cspan style=\"font-size: 18px;\"\u003e\u003cspan style=\"font-family: times new roman, times;\"\u003e16340 Mobile Power Battery Holder Module \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e"}
Translation missing: en.products.product.regular_price
$8.99
{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":2521716326458,"title":"Micro USB Wemos ESP32 Plug 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi","handle":"micro-usb-wemos-esp32-plug-18650-battery-shield-v3-esp-32-for-arduino-raspberry-pi","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"widget-text-18\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/012590_480x480.jpg?v=1670407727\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e0.5A current charging\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 Switch control USB output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5~8V Input Voltage\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3V \u0026amp; 1A Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5V \u0026amp; 2A Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3V output port x3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5V output port x3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. If you put wrong direction, charging chip will be destroyed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3.This product does not include 18650 battery\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 xPlug 18650 Battery Shield V3 Module ( Battery Not Included )\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-09-25T17:29:23+08:00","created_at":"2019-09-25T17:41:22+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["1865","18650","Arduino","ESP32","Pro Micro","Raspberry Pi","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23743244140602,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012590","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro USB Wemos ESP32 Plug 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1.jpg?v=1604625575","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_7.jpg?v=1604625575","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_5.jpg?v=1604625575","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_8.jpg?v=1604625575","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_9.jpg?v=1604625575"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1.jpg?v=1604625575","options":["Title"],"media":[{"alt":null,"id":14820047126728,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1.jpg?v=1604625575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1.jpg?v=1604625575","width":1000},{"alt":null,"id":14820047061192,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_7.jpg?v=1604625575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_7.jpg?v=1604625575","width":1000},{"alt":null,"id":14820046930120,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_5.jpg?v=1604625575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_5.jpg?v=1604625575","width":1000},{"alt":null,"id":14820046995656,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_8.jpg?v=1604625575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_8.jpg?v=1604625575","width":1000},{"alt":null,"id":14820047028424,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_9.jpg?v=1604625575"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_9.jpg?v=1604625575","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv id=\"widget-text-18\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/012590_480x480.jpg?v=1670407727\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e0.5A current charging\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 Switch control USB output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5~8V Input Voltage\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3V \u0026amp; 1A Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5V \u0026amp; 2A Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3V output port x3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5V output port x3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2. If you put wrong direction, charging chip will be destroyed.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3.This product does not include 18650 battery\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1 xPlug 18650 Battery Shield V3 Module ( Battery Not Included )\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price
$7.99
{"id":2510953218106,"title":"ESP32S For Wemos For Raspberry Pi 18650 Battery Shield V3 Micro USB Port Type-A USB 0.5A For Arduino With Cable Diy Kit","handle":"esp32-esp32s-for-wemos-for-raspberry-pi-18650-battery-shield-v3-micro-usb-port-type-a-usb-0-5a-for-arduino-with-cable-diy-kit","description":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c4c54a3AphwA0\"\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e0.5A current charging\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1 switch control USB output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5~8V Input Voltage\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3V \u0026amp; 1A Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5V \u0026amp; 2A Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3V output port x3\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5V output port x3\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThis product does not include 18650 battery\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eQuantity: 1 Set\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e1PC x Battery Shield Module (does not include 18650 battery)\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e1PC x USB Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2019-09-06T16:42:26+08:00","created_at":"2019-09-06T16:42:26+08:00","vendor":"diymore","type":"Battery Protection Board","tags":["1865","18650","Arduino","ESP32","Kits","Raspberry Pi","Shield"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23688105656378,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012533","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP32S For Wemos For Raspberry Pi 18650 Battery Shield V3 Micro USB Port Type-A USB 0.5A For Arduino With Cable Diy Kit","public_title":null,"options":["Default Title"],"price":799,"weight":50,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516016_371.jpg?v=1588660823","\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516019_689.jpg?v=1588660823","\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516020_201.jpg?v=1588660823","\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516018_730.jpg?v=1588660823","\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516017_724.jpg?v=1588660823","\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516021_448.jpg?v=1588660823"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516016_371.jpg?v=1588660823","options":["Title"],"media":[{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679039344711,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516016_371.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516016_371.jpg?v=1588660823","width":1000},{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679039410247,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516019_689.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516019_689.jpg?v=1588660823","width":1000},{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679039508551,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516020_201.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516020_201.jpg?v=1588660823","width":1000},{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679040589895,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516018_730.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516018_730.jpg?v=1588660823","width":1000},{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679040688199,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516017_724.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516017_724.jpg?v=1588660823","width":1000},{"alt":"Esp32 Esp32S For Wemos Raspberry Pi 18650 Battery Shield V3 Micro Usb Port Type-A 0.5A Arduino With","id":6679040852039,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516021_448.jpg?v=1588660823"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/product-image-1122516021_448.jpg?v=1588660823","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cspan\u003e\u003cstrong data-spm-anchor-id=\"a2g0o.detail.1000023.i0.4c4c54a3AphwA0\"\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e0.5A current charging\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e1 switch control USB output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5~8V Input Voltage\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3V \u0026amp; 1A Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5V \u0026amp; 2A Output\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3V output port x3\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5V output port x3\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eThis product does not include 18650 battery\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eQuantity: 1 Set\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e1PC x Battery Shield Module (does not include 18650 battery)\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e1PC x USB Cable\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e"}
38% OFF
Translation missing: en.products.product.regular_price
$16.00
$9.99
On Sale
{"id":4340741242951,"title":"ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V\/5V","handle":"esp32-esp32s-wemos-4pcs-18650-lithium-battery-charging-shield-5v-3a-3v-1a-power-bank-expansion-board-v9-for-arduino-us-7-59us-8-53-11","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eInput overvoltage protection, output overcurrent\/short circuit protection, charging timeout\/overvoltage protection\u003cbr\u003eOutput current up to 3A, efficiency up to 95%\u003cbr\u003eWith LED identification percentage electricity metering\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameter:\u003c\/strong\u003e\u003cbr\u003eThis power bank supply has a built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage, etc.\u003cbr\u003eUSB port output and mobile power board have extended port 3V and 5V output ports to facilitate customer needs and use, greatly reducing the problem of fewer ports\u003cbr\u003eThe 4-level LED light shows the power. The default power-on is always working. It needs to be manually turned off. (If you need to change to the non-working state automatic shutdown mode, just cut the middle line of the “NC” bit or remove the “ROUT” resistor. can)\u003cbr\u003e1.8A charging 3A discharge high integration mobile power IC\u003cbr\u003eMotherboard size: 99.98 * 96.24 * 21mm (L*W*H)\u003cbr\u003eInput port: MICRO USB, type-C, wide voltage, up to 6.5V input\u003cbr\u003eInput requirements: 5V constant voltage power supply can be used as charging power input, matching charger 5V1A or above\u003cbr\u003eOutput port: USB or expansion port\u003cbr\u003eOutput parameter 5V\/3A or 3V\/1A\u003cbr\u003eConversion efficiency up to 95% (high conversion rate)\u003cbr\u003eWorking temperature: -20 -70 °C\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsage Instruction:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/1_bbc59575-5a28-419b-bf07-3ffda4f4c684_480x480.jpg?v=1672971037\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/1_bbc59575-5a28-419b-bf07-3ffda4f4c684_480x480.jpg?v=1672971037\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003ePower Bank\u003cbr\u003eOther battery powered devices\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrecaution:\u003c\/strong\u003e\u003cbr\u003eDo not reverse the positive and negative, human factors cause damage at your own risk, do not reverse\u003cbr\u003eThe battery voltage works normally at 3.2V-4.2V. Do not connect the batteries in series. The series connection will increase the voltage. If the battery capacity is increased, the battery can be connected in parallel. Do not connect in series.\u003cbr\u003eWhen the battery is reinstalled, the chip may detect the power-off protection mechanism. It needs to be recharged and activated. This is normal!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 * ESP32S WeMos 4 PCS 18650 Lithium Battery Charging Shield Board\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He88f8fe490324227b685c51df759fa55D.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hced73d84228d4d06a43254f6642ee272C.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1fe9f0089e2e4b128045fb7958d00466U.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H656688d584fc46d8bd2d86c168cadf55B.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H411ae5be5cfd40eb939ccc3a607090aeI.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hb3ca1ea0f89f4f6d98e41f378620c3fb0.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2020-06-28T16:54:49+08:00","created_at":"2019-11-06T21:32:53+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":999,"price_min":999,"price_max":4099,"available":true,"price_varies":true,"compare_at_price":1600,"compare_at_price_min":1600,"compare_at_price_max":1600,"compare_at_price_varies":false,"variants":[{"id":37552049258696,"title":"1PCS","option1":"1PCS","option2":null,"option3":null,"sku":"XZ0014","requires_shipping":true,"taxable":false,"featured_image":{"id":14506638803015,"product_id":4340741242951,"position":5,"created_at":"2020-05-05T16:38:25+08:00","updated_at":"2020-05-05T16:38:36+08:00","alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","width":1000,"height":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_6_284.jpg?v=1588667916","variant_ids":[37552049258696]},"available":true,"name":"ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V\/5V - 1PCS","public_title":"1PCS","options":["1PCS"],"price":999,"weight":0,"compare_at_price":1600,"inventory_management":"shopify","barcode":"","featured_media":{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679823810631,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_6_284.jpg?v=1588667916"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37552049291464,"title":"Buy 2 Get 1","option1":"Buy 2 Get 1","option2":null,"option3":null,"sku":"XZ00143","requires_shipping":true,"taxable":false,"featured_image":{"id":38250830463192,"product_id":4340741242951,"position":9,"created_at":"2022-09-19T11:47:36+08:00","updated_at":"2022-09-19T11:47:36+08:00","alt":null,"width":998,"height":811,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_98c375b1-333f-4103-95d5-226602468826.jpg?v=1663559256","variant_ids":[37552049291464]},"available":true,"name":"ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V\/5V - Buy 2 Get 1","public_title":"Buy 2 Get 1","options":["Buy 2 Get 1"],"price":2599,"weight":0,"compare_at_price":1600,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":30845182345432,"position":9,"preview_image":{"aspect_ratio":1.231,"height":811,"width":998,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_98c375b1-333f-4103-95d5-226602468826.jpg?v=1663559256"}},"requires_selling_plan":false,"selling_plan_allocations":[]},{"id":37552049324232,"title":"Buy 3 Get 2","option1":"Buy 3 Get 2","option2":null,"option3":null,"sku":"XZ00145","requires_shipping":true,"taxable":false,"featured_image":{"id":38250831282392,"product_id":4340741242951,"position":10,"created_at":"2022-09-19T11:47:47+08:00","updated_at":"2022-09-19T11:47:47+08:00","alt":null,"width":1270,"height":811,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_67c3bd7b-b783-47f7-a14a-7a5952d5f23d.jpg?v=1663559267","variant_ids":[37552049324232]},"available":true,"name":"ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V\/5V - Buy 3 Get 2","public_title":"Buy 3 Get 2","options":["Buy 3 Get 2"],"price":4099,"weight":0,"compare_at_price":1600,"inventory_management":"shopify","barcode":"","featured_media":{"alt":null,"id":30845183164632,"position":10,"preview_image":{"aspect_ratio":1.566,"height":811,"width":1270,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_67c3bd7b-b783-47f7-a14a-7a5952d5f23d.jpg?v=1663559267"}},"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/Four-18650-Lithium-Battery-Shield-V9-Mobile-Power-band-Micro-Type-C-USB-Expansion-Board-Module_638.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAKH8PNA-jNA-g_1000_1000_878.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAJyzfNA-jNA-g_1000_1000_548.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_8_513.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_6_284.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_5_656.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_7_103.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_9_863.jpg?v=1588667916","\/\/www.diymore.cc\/cdn\/shop\/products\/2_98c375b1-333f-4103-95d5-226602468826.jpg?v=1663559256","\/\/www.diymore.cc\/cdn\/shop\/products\/1_67c3bd7b-b783-47f7-a14a-7a5952d5f23d.jpg?v=1663559267"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/Four-18650-Lithium-Battery-Shield-V9-Mobile-Power-band-Micro-Type-C-USB-Expansion-Board-Module_638.jpg?v=1588667916","options":["Quantity"],"media":[{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679822630983,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/Four-18650-Lithium-Battery-Shield-V9-Mobile-Power-band-Micro-Type-C-USB-Expansion-Board-Module_638.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/Four-18650-Lithium-Battery-Shield-V9-Mobile-Power-band-Micro-Type-C-USB-Expansion-Board-Module_638.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679823056967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAKH8PNA-jNA-g_1000_1000_878.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAKH8PNA-jNA-g_1000_1000_878.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679823220807,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAJyzfNA-jNA-g_1000_1000_548.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/lADPBE1XYjAJyzfNA-jNA-g_1000_1000_548.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679823417415,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_8_513.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_8_513.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679823810631,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_6_284.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_6_284.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679824302151,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_5_656.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_5_656.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679824597063,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_7_103.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_7_103.jpg?v=1588667916","width":1000},{"alt":"Esp32 Esp32S Wemos 4Pcs 18650 Lithium Battery Charging Shield 5V\/3A 3V\/1A Power Bank Expansion Board","id":6679824793671,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_9_863.jpg?v=1588667916"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XZ0014_9_863.jpg?v=1588667916","width":1000},{"alt":null,"id":30845182345432,"position":9,"preview_image":{"aspect_ratio":1.231,"height":811,"width":998,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_98c375b1-333f-4103-95d5-226602468826.jpg?v=1663559256"},"aspect_ratio":1.231,"height":811,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_98c375b1-333f-4103-95d5-226602468826.jpg?v=1663559256","width":998},{"alt":null,"id":30845183164632,"position":10,"preview_image":{"aspect_ratio":1.566,"height":811,"width":1270,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_67c3bd7b-b783-47f7-a14a-7a5952d5f23d.jpg?v=1663559267"},"aspect_ratio":1.566,"height":811,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_67c3bd7b-b783-47f7-a14a-7a5952d5f23d.jpg?v=1663559267","width":1270}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003eInput overvoltage protection, output overcurrent\/short circuit protection, charging timeout\/overvoltage protection\u003cbr\u003eOutput current up to 3A, efficiency up to 95%\u003cbr\u003eWith LED identification percentage electricity metering\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameter:\u003c\/strong\u003e\u003cbr\u003eThis power bank supply has a built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage, etc.\u003cbr\u003eUSB port output and mobile power board have extended port 3V and 5V output ports to facilitate customer needs and use, greatly reducing the problem of fewer ports\u003cbr\u003eThe 4-level LED light shows the power. The default power-on is always working. It needs to be manually turned off. (If you need to change to the non-working state automatic shutdown mode, just cut the middle line of the “NC” bit or remove the “ROUT” resistor. can)\u003cbr\u003e1.8A charging 3A discharge high integration mobile power IC\u003cbr\u003eMotherboard size: 99.98 * 96.24 * 21mm (L*W*H)\u003cbr\u003eInput port: MICRO USB, type-C, wide voltage, up to 6.5V input\u003cbr\u003eInput requirements: 5V constant voltage power supply can be used as charging power input, matching charger 5V1A or above\u003cbr\u003eOutput port: USB or expansion port\u003cbr\u003eOutput parameter 5V\/3A or 3V\/1A\u003cbr\u003eConversion efficiency up to 95% (high conversion rate)\u003cbr\u003eWorking temperature: -20 -70 °C\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUsage Instruction:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/1_bbc59575-5a28-419b-bf07-3ffda4f4c684_480x480.jpg?v=1672971037\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/1_bbc59575-5a28-419b-bf07-3ffda4f4c684_480x480.jpg?v=1672971037\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003cbr\u003ePower Bank\u003cbr\u003eOther battery powered devices\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePrecaution:\u003c\/strong\u003e\u003cbr\u003eDo not reverse the positive and negative, human factors cause damage at your own risk, do not reverse\u003cbr\u003eThe battery voltage works normally at 3.2V-4.2V. Do not connect the batteries in series. The series connection will increase the voltage. If the battery capacity is increased, the battery can be connected in parallel. Do not connect in series.\u003cbr\u003eWhen the battery is reinstalled, the chip may detect the power-off protection mechanism. It needs to be recharged and activated. This is normal!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 * ESP32S WeMos 4 PCS 18650 Lithium Battery Charging Shield Board\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/He88f8fe490324227b685c51df759fa55D.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hced73d84228d4d06a43254f6642ee272C.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H1fe9f0089e2e4b128045fb7958d00466U.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H656688d584fc46d8bd2d86c168cadf55B.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/H411ae5be5cfd40eb939ccc3a607090aeI.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/Hb3ca1ea0f89f4f6d98e41f378620c3fb0.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$7.99
{"id":1751341695034,"title":"Micro USB Wemos ESP32 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi","handle":"micro-usb-wemos-esp32-18650-battery-shield-v3-esp-32-for-arduino-raspberry-pi","description":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/012590_480x480.jpg?v=1670407727\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery protection(Over charge or Over discharge)\u003c\/li\u003e\n\u003cli\u003eMicro USB port Input; Type-A USB Output\u003c\/li\u003e\n\u003cli\u003e0.5A current charging; 5~8V Input Voltage\u003c\/li\u003e\n\u003cli\u003e1 Switch control USB output\u003c\/li\u003e\n\u003cli\u003e3V \u0026amp; 1A Output; 5V \u0026amp; 2A Output\u003c\/li\u003e\n\u003cli\u003e3V output port x3; 5V output port x3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePlease allow 1-5mm error due to manual measurement. pls make sure you do not mind before you bid.\u003cbr\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003cbr\u003eIf you put wrong direction, charging chip will be destroyed.\u003cbr\u003eThis product does not include 18650 battery\u003cbr\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003cbr\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003cbr\u003eLED indicate(Green means full,Red means charging)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003cbr\u003e1 x Battery Shield Module ( Battery Not Included )","published_at":"2018-07-23T18:29:33+08:00","created_at":"2018-07-23T18:57:49+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["1865","18650","Arduino","ESP32","Pro Micro","Raspberry Pi","Shield"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16617103458362,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012590","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro USB Wemos ESP32 18650 Battery Shield V3 ESP-32 for Arduino Raspberry Pi","public_title":null,"options":["Default Title"],"price":799,"weight":25,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012533_954.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/6_9bcfb7ef-66e7-4a5d-aa00-d7a86d9f3694_501.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_403.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/2_d793742f-4a73-4995-87bc-10518d0fdf1b_530.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/3_8b40e84f-24cf-42f6-b18c-2071e2bd648d_434.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/4_07ad16c8-162d-4467-a37e-1f32ca29b8e3_933.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/5_a1e0b0cd-8825-495b-875f-0c8d3fa6310c_842.jpg?v=1588646416","\/\/www.diymore.cc\/cdn\/shop\/products\/012590.jpg?v=1670407754"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012533_954.jpg?v=1588646416","options":["Title"],"media":[{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678445785159,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012533_954.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012533_954.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678445817927,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_9bcfb7ef-66e7-4a5d-aa00-d7a86d9f3694_501.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_9bcfb7ef-66e7-4a5d-aa00-d7a86d9f3694_501.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678445916231,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_403.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590_1_403.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678445981767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_d793742f-4a73-4995-87bc-10518d0fdf1b_530.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_d793742f-4a73-4995-87bc-10518d0fdf1b_530.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678446014535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_8b40e84f-24cf-42f6-b18c-2071e2bd648d_434.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_8b40e84f-24cf-42f6-b18c-2071e2bd648d_434.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678446211143,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_07ad16c8-162d-4467-a37e-1f32ca29b8e3_933.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_07ad16c8-162d-4467-a37e-1f32ca29b8e3_933.jpg?v=1588646416","width":1000},{"alt":"Micro Usb Wemos Esp32 18650 Battery Shield V3 Esp-32 For Arduino Raspberry Pi Expansion Module","id":6678446407751,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_a1e0b0cd-8825-495b-875f-0c8d3fa6310c_842.jpg?v=1588646416"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_a1e0b0cd-8825-495b-875f-0c8d3fa6310c_842.jpg?v=1588646416","width":1000},{"alt":null,"id":31318163882200,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590.jpg?v=1670407754"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012590.jpg?v=1670407754","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopifycdn.net\/s\/files\/1\/0122\/7558\/0986\/files\/012590_480x480.jpg?v=1670407727\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBattery protection(Over charge or Over discharge)\u003c\/li\u003e\n\u003cli\u003eMicro USB port Input; Type-A USB Output\u003c\/li\u003e\n\u003cli\u003e0.5A current charging; 5~8V Input Voltage\u003c\/li\u003e\n\u003cli\u003e1 Switch control USB output\u003c\/li\u003e\n\u003cli\u003e3V \u0026amp; 1A Output; 5V \u0026amp; 2A Output\u003c\/li\u003e\n\u003cli\u003e3V output port x3; 5V output port x3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePlease allow 1-5mm error due to manual measurement. pls make sure you do not mind before you bid.\u003cbr\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\u003cbr\u003eIf you put wrong direction, charging chip will be destroyed.\u003cbr\u003eThis product does not include 18650 battery\u003cbr\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003cbr\u003eSize: 9.8x2.9cm\/3.86x1.14inch\u003cbr\u003eLED indicate(Green means full,Red means charging)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003cbr\u003e1 x Battery Shield Module ( Battery Not Included )"}
Translation missing: en.products.product.regular_price
$47.99
{"id":1703142817850,"title":"BEETLE BadUSB Micro ATMEGA32U4-AU Development Expansion Module Board For Arduino Leonardo R3 5V I2C","handle":"diymore-beetle-badusb-micro-atmega32u4-au-development-expansion-module-board-for-arduino-leonardo-r3-5v-i2c","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMicrocontroller: ATmega32u4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating Voltage: 5V DC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eDigital I\/O Pins: 10\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePWM Channels: 4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAnalog Input Channels: 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eFrequency: 16 MHz\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescripton:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMicrocontroller: ATmega32u4\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFrequency: 16 MHz\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating Voltage: 5V DC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDigital I\/O Pins: 10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePWM Channels: 4\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAnalog Input Channels: 5\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUART: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eI2C: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFlash Memory: 32 KB (ATmega32u4) of which 4KB used by bootloader\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSRAM: 2.5 KB (ATmega32u4)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEEPROM: 1 KB (ATmega32u4)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Include:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 x Beetle USB ATMEGA32U4 Development Board for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.cn\/s\/files\/1\/0122\/7558\/0986\/files\/3CC517D5-DA12-4f61-8211-02439597D908.png?v=1584409126\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:35:55+08:00","created_at":"2018-07-13T16:39:24+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Leonardo R3","Shield"],"price":4799,"price_min":4799,"price_max":4799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15872046923834,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012594","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BEETLE BadUSB Micro ATMEGA32U4-AU Development Expansion Module Board For Arduino Leonardo R3 5V I2C","public_title":null,"options":["Default Title"],"price":4799,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012594_1_259.jpg?v=1588643676","\/\/www.diymore.cc\/cdn\/shop\/products\/012594_2_618.jpg?v=1588643676","\/\/www.diymore.cc\/cdn\/shop\/products\/012594_3_905.jpg?v=1588643676","\/\/www.diymore.cc\/cdn\/shop\/products\/012594_5_399.jpg?v=1588643676","\/\/www.diymore.cc\/cdn\/shop\/products\/012594_6_753.jpg?v=1588643676"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_1_259.jpg?v=1588643676","options":["Title"],"media":[{"alt":"Beetle Badusb Micro Atmega32U4-Au Development Expansion Module Board For Arduino Leonardo R3 5V I2C","id":6678332407879,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_1_259.jpg?v=1588643676"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_1_259.jpg?v=1588643676","width":1000},{"alt":"Beetle Badusb Micro Atmega32U4-Au Development Expansion Module Board For Arduino Leonardo R3 5V I2C","id":6678332571719,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_2_618.jpg?v=1588643676"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_2_618.jpg?v=1588643676","width":1000},{"alt":"Beetle Badusb Micro Atmega32U4-Au Development Expansion Module Board For Arduino Leonardo R3 5V I2C","id":6678332670023,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_3_905.jpg?v=1588643676"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_3_905.jpg?v=1588643676","width":1000},{"alt":"Beetle Badusb Micro Atmega32U4-Au Development Expansion Module Board For Arduino Leonardo R3 5V I2C","id":6678332801095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_5_399.jpg?v=1588643676"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_5_399.jpg?v=1588643676","width":1000},{"alt":"Beetle Badusb Micro Atmega32U4-Au Development Expansion Module Board For Arduino Leonardo R3 5V I2C","id":6678332899399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_6_753.jpg?v=1588643676"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012594_6_753.jpg?v=1588643676","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMicrocontroller: ATmega32u4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating Voltage: 5V DC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eDigital I\/O Pins: 10\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePWM Channels: 4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eAnalog Input Channels: 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eFrequency: 16 MHz\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescripton:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003eMicrocontroller: ATmega32u4\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFrequency: 16 MHz\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating Voltage: 5V DC\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDigital I\/O Pins: 10\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePWM Channels: 4\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAnalog Input Channels: 5\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUART: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eI2C: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB: 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFlash Memory: 32 KB (ATmega32u4) of which 4KB used by bootloader\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSRAM: 2.5 KB (ATmega32u4)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eEEPROM: 1 KB (ATmega32u4)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Include:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 x Beetle USB ATMEGA32U4 Development Board for Arduino\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.cn\/s\/files\/1\/0122\/7558\/0986\/files\/3CC517D5-DA12-4f61-8211-02439597D908.png?v=1584409126\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1763755294778,"title":"Full Color RGB LED Strip Driver Module Shield for Arduino STM32 AVR V1.0","handle":"full-color-rgb-led-strip-driver-module-shield-for-arduino-stm32-avr-v1-0","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBased on a P9813; Can be cascaded all lights of the drive module\u003c\/li\u003e\n\u003cli\u003eJust two signal lines and two power cords can control five meters long full-color (RGB) light bar\u003c\/li\u003e\n\u003cli\u003eCan also be cascaded more drive modules to control more light bar\u003c\/li\u003e\n\u003cli\u003eJust set the program of red, green and blue corresponding to that of the corresponding channel\u003c\/li\u003e\n\u003cli\u003eWidely used in guardrail control, room decor and other occasions\u003c\/li\u003e\n\u003cli\u003eSuitable for 5V MCU system, Arduino UNO R3 and its compatible motherboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply of controlling interface for MCU is 4.5~5.5VDC\u003c\/li\u003e\n\u003cli\u003eExternal power supply is 12VDC\u003c\/li\u003e\n\u003cli\u003eCascadable\u003c\/li\u003e\n\u003cli\u003eCan drive 5 meters of RGB LED Strip (72W Max)\u003c\/li\u003e\n\u003cli\u003e4x M2 screws positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x LED Strip Driver module\u003cbr\u003e\u003cbr\u003e","published_at":"2018-07-26T10:32:05+08:00","created_at":"2018-07-26T10:34:30+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield","STM32","UNO R3"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16802141339706,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011442","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Full Color RGB LED Strip Driver Module Shield for Arduino STM32 AVR V1.0","public_title":null,"options":["Default Title"],"price":599,"weight":8,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/011442_1_916.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_10_400.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_2_959.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_4_659.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_3_353.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_6_138.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_9_838.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_12_484.jpg?v=1588647533","\/\/www.diymore.cc\/cdn\/shop\/products\/011442_11_434.jpg?v=1588647533"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_1_916.jpg?v=1588647533","options":["Title"],"media":[{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678490972231,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_1_916.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_1_916.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491037767,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_10_400.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_10_400.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491267143,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_2_959.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_2_959.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491365447,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_4_659.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_4_659.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491398215,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_3_353.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_3_353.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491430983,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_6_138.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_6_138.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491463751,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_9_838.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_9_838.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491562055,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_12_484.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_12_484.jpg?v=1588647533","width":1000},{"alt":"Full Color Rgb Led Strip Driver Module Shield For Arduino Stm32 Avr V1.0 Motor","id":6678491824199,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_11_434.jpg?v=1588647533"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011442_11_434.jpg?v=1588647533","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eBased on a P9813; Can be cascaded all lights of the drive module\u003c\/li\u003e\n\u003cli\u003eJust two signal lines and two power cords can control five meters long full-color (RGB) light bar\u003c\/li\u003e\n\u003cli\u003eCan also be cascaded more drive modules to control more light bar\u003c\/li\u003e\n\u003cli\u003eJust set the program of red, green and blue corresponding to that of the corresponding channel\u003c\/li\u003e\n\u003cli\u003eWidely used in guardrail control, room decor and other occasions\u003c\/li\u003e\n\u003cli\u003eSuitable for 5V MCU system, Arduino UNO R3 and its compatible motherboard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply of controlling interface for MCU is 4.5~5.5VDC\u003c\/li\u003e\n\u003cli\u003eExternal power supply is 12VDC\u003c\/li\u003e\n\u003cli\u003eCascadable\u003c\/li\u003e\n\u003cli\u003eCan drive 5 meters of RGB LED Strip (72W Max)\u003c\/li\u003e\n\u003cli\u003e4x M2 screws positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x LED Strip Driver module\u003cbr\u003e\u003cbr\u003e"}
Translation missing: en.products.product.regular_price
$7.99
{"id":1860018110522,"title":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","handle":"avr-isp-shield-burning-burn-bootloader-programmer-for-arduino-uno-r3","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader","published_at":"2018-08-27T16:54:48+08:00","created_at":"2018-08-27T16:56:44+08:00","vendor":"diymore","type":"Drive Expansion Board","tags":["Arduino","Nano","Shield","UNO R3"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18397226074170,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"020082","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AVR ISP Shield Burning Burn Bootloader Programmer for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":799,"weight":35,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/020082_2_305.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_5_674.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_6_419.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_1_689.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_3_666.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_8_572.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_9_412.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_11_686.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_12_750.jpg?v=1588654650","\/\/www.diymore.cc\/cdn\/shop\/products\/020082_4_259.jpg?v=1588654650"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_2_305.jpg?v=1588654650","options":["Title"],"media":[{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678759866439,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_2_305.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_2_305.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678759899207,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_5_674.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_5_674.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678759997511,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_6_419.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_6_419.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760128583,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_1_689.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_1_689.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760226887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_3_666.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_3_666.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760292423,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_8_572.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_8_572.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760489031,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_9_412.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_9_412.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760554567,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_11_686.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_11_686.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760685639,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_12_750.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_12_750.jpg?v=1588654650","width":1000},{"alt":"Avr Isp Shield Burning Burn Bootloader Programmer For Arduino Uno R3 Drive Expansion Board","id":6678760947783,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_4_259.jpg?v=1588654650"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020082_4_259.jpg?v=1588654650","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a programmer expansion shield that allows your Arduino board to modify the fuse bits and burn bootloader into external chip and other Arduino boards.\u003cbr\u003eOn-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Arduino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: As it uses SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V\u003c\/li\u003e\n\u003cli\u003eOperating current: 500mA (max)\u003c\/li\u003e\n\u003cli\u003eArduino board to be burned: support Arduino UNO R3 \/ Mega2560 \/ Nano \/ pro mini (5V 16M)\u003c\/li\u003e\n\u003cli\u003eOn-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.\u003c\/li\u003e\n\u003cli\u003eOn-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.\u003c\/li\u003e\n\u003cli\u003eOnboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning\u003c\/li\u003e\n\u003cli\u003eOnboard ISP_6PIN interface, for the external Arduino board bootloader burning\u003c\/li\u003e\n\u003cli\u003eOn-board ISP_10PIN interface\u003c\/li\u003e\n\u003cli\u003eOn-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X AVR ISP Shield Burning Bootloader"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1654348480570,"title":"Prototype PCB Protoshield Shield Board DIY For Arduino UNO R3 Mega","handle":"diymore-2pcs-prototyp-pcb-expansion-board-for-arduino-uno-r3-shield-breadboard-2-mm-2-54-mm-pitch-with-pins-diy","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e100% brand new and high quality\u003cbr\u003ePCB Dimension: 68.58mm x 53.34mm \/ 2.7\" x 2.1\"\u003cbr\u003ePCB Thickness: 1.6mm\u003cbr\u003eMaterial: high quality FR-4 glass fiber PCB.\u003cbr\u003eAll holes are plated through\u003cbr\u003eTop and bottom side are identical copper layers.\u003cbr\u003ePads pitch:\u003cbr\u003eIn the white frame range: 2.00mm \/ 0.079\", hole diameter 0.8mm \/ 0.031\".\u003cbr\u003eOther pads pitch: 2.54mm \/ 0.1\", hole diameter 0.9mm \/ 0.035\".\u003cbr\u003eyou need to weld the pins by yourself.\u003cbr\u003eNo retail package\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003cbr\u003e1 * DIY PCB Board for Arduino Prototype Shield\u003cbr\u003e2 *1x8 2.54 Female Header (12MM long foot)\u003cbr\u003e1 * 1x6 2.54 Female Header (12MM long foot)\u003cbr\u003e1 * 1x10 2.54 Female Header (12MM long foot)\u003cbr\u003e2 * 1x8 2.54 Male Header \u003cbr\u003e1 * 1x6 2.54 Male Header \u003cbr\u003e1 * 1x10 2.54 Male Header \u003cbr\u003e1 * 2x3 2.54 Feamale Header\u003cbr\u003e1 * Reset Button\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-07-07T18:54:38+08:00","created_at":"2018-07-07T19:04:55+08:00","vendor":"diymore","type":"Breadboard","tags":["Arduino","Sale Products","Shield","UNO R3"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15131282636858,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"020101","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Prototype PCB Protoshield Shield Board DIY For Arduino UNO R3 Mega","public_title":null,"options":["Default Title"],"price":599,"weight":17,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/020101_3_241.jpg?v=1588642720","\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_708.jpg?v=1588642720","\/\/www.diymore.cc\/cdn\/shop\/products\/020101_6_566.jpg?v=1588642720","\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_b3c37435-89e3-483c-8ad6-197c7feb44c4_844.jpg?v=1588642720","\/\/www.diymore.cc\/cdn\/shop\/products\/020101_5_253.jpg?v=1588642720"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_3_241.jpg?v=1588642720","options":["Title"],"media":[{"alt":"Prototyp Pcb Expansion Board For Arduino Uno R3 Shield Breadboard 2 Mm 54 Pitch With Pins Diy","id":6678267527239,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_3_241.jpg?v=1588642720"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_3_241.jpg?v=1588642720","width":1000},{"alt":"Prototyp Pcb Expansion Board For Arduino Uno R3 Shield Breadboard 2 Mm 54 Pitch With Pins Diy","id":6678267723847,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_708.jpg?v=1588642720"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_708.jpg?v=1588642720","width":1000},{"alt":"Prototyp Pcb Expansion Board For Arduino Uno R3 Shield Breadboard 2 Mm 54 Pitch With Pins Diy","id":6678267953223,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_6_566.jpg?v=1588642720"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_6_566.jpg?v=1588642720","width":1000},{"alt":"Prototyp Pcb Expansion Board For Arduino Uno R3 Shield Breadboard 2 Mm 54 Pitch With Pins Diy","id":6678268117063,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_b3c37435-89e3-483c-8ad6-197c7feb44c4_844.jpg?v=1588642720"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_2_b3c37435-89e3-483c-8ad6-197c7feb44c4_844.jpg?v=1588642720","width":1000},{"alt":"Prototyp Pcb Expansion Board For Arduino Uno R3 Shield Breadboard 2 Mm 54 Pitch With Pins Diy","id":6678268346439,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_5_253.jpg?v=1588642720"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020101_5_253.jpg?v=1588642720","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e100% brand new and high quality\u003cbr\u003ePCB Dimension: 68.58mm x 53.34mm \/ 2.7\" x 2.1\"\u003cbr\u003ePCB Thickness: 1.6mm\u003cbr\u003eMaterial: high quality FR-4 glass fiber PCB.\u003cbr\u003eAll holes are plated through\u003cbr\u003eTop and bottom side are identical copper layers.\u003cbr\u003ePads pitch:\u003cbr\u003eIn the white frame range: 2.00mm \/ 0.079\", hole diameter 0.8mm \/ 0.031\".\u003cbr\u003eOther pads pitch: 2.54mm \/ 0.1\", hole diameter 0.9mm \/ 0.035\".\u003cbr\u003eyou need to weld the pins by yourself.\u003cbr\u003eNo retail package\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003cbr\u003e1 * DIY PCB Board for Arduino Prototype Shield\u003cbr\u003e2 *1x8 2.54 Female Header (12MM long foot)\u003cbr\u003e1 * 1x6 2.54 Female Header (12MM long foot)\u003cbr\u003e1 * 1x10 2.54 Female Header (12MM long foot)\u003cbr\u003e2 * 1x8 2.54 Male Header \u003cbr\u003e1 * 1x6 2.54 Male Header \u003cbr\u003e1 * 1x10 2.54 Male Header \u003cbr\u003e1 * 2x3 2.54 Feamale Header\u003cbr\u003e1 * Reset Button\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price
$9.99
{"id":1901157875770,"title":"NODEMCU Wemos Wifi ESP8266 ESP-12F CP2102 Micro USB Development Board +0.96\"OLED","handle":"nodemcu-wemos-wifi-esp8266-esp-12f-cp2102-micro-usb-development-board-0-96oled","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a low cost Arduino-compatible ESP8266 development board. \u003cbr\u003eA 0.96\" OLED display is on the board. It is very easy for beginners. You can program it like Arduino \u003cbr\u003eThere is a project support for ESP8266 chip to the Arduino environment: Arduino core for ESP8266 WiFi chip. Another famous project is NodeMCU, which you can use LUA to control ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eAll ESP8266 pins broken out\u003cbr\u003e12 digital pins write\/read\/interrupt\/pwm\/I2C\/one-wire supported(except D0)\u003cbr\u003e1 analog input\u003cbr\u003eIntegrated 0.96 Prime; OLED\u003cbr\u003eMicro USB connection\u003cbr\u003eCompatible with Arduino\u003cbr\u003eCompatible with NodeMCU(Lua for ESP8266)\u003cbr\u003eInput Power 4.75V ~ 12V\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x ESP-12F CP2102 Micro USB Development Board\u003cbr\u003e1 x 10 pin\u003cbr\u003e1 x 16 pin","published_at":"2018-09-13T12:26:25+08:00","created_at":"2018-09-13T12:29:02+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Display","ESP8266","OLED","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18990725398586,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040279","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NODEMCU Wemos Wifi ESP8266 ESP-12F CP2102 Micro USB Development Board +0.96\"OLED","public_title":null,"options":["Default Title"],"price":999,"weight":15,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_278.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_2_688.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_efd318be-8c61-4540-9389-9e1bb8b93161_257.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_6_346.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_11_423.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_3_239.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_4_943.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_8_632.jpg?v=1588655395","\/\/www.diymore.cc\/cdn\/shop\/products\/040279_10_508.jpg?v=1588655395"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_278.jpg?v=1588655395","options":["Title"],"media":[{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678790930503,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_278.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_278.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678791258183,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_2_688.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_2_688.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678791356487,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_efd318be-8c61-4540-9389-9e1bb8b93161_257.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_1_efd318be-8c61-4540-9389-9e1bb8b93161_257.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678791454791,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_6_346.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_6_346.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678792339527,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_11_423.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_11_423.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678792568903,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_3_239.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_3_239.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678792863815,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_4_943.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_4_943.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678793158727,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_8_632.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_8_632.jpg?v=1588655395","width":1000},{"alt":"Nodemcu Wemos Wifi Esp8266 Esp-12F Cp2102 Micro Usb Development Board +0.96Oled Expansion Shield","id":6678793420871,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_10_508.jpg?v=1588655395"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040279_10_508.jpg?v=1588655395","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eThis is a low cost Arduino-compatible ESP8266 development board. \u003cbr\u003eA 0.96\" OLED display is on the board. It is very easy for beginners. You can program it like Arduino \u003cbr\u003eThere is a project support for ESP8266 chip to the Arduino environment: Arduino core for ESP8266 WiFi chip. Another famous project is NodeMCU, which you can use LUA to control ESP8266\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eAll ESP8266 pins broken out\u003cbr\u003e12 digital pins write\/read\/interrupt\/pwm\/I2C\/one-wire supported(except D0)\u003cbr\u003e1 analog input\u003cbr\u003eIntegrated 0.96 Prime; OLED\u003cbr\u003eMicro USB connection\u003cbr\u003eCompatible with Arduino\u003cbr\u003eCompatible with NodeMCU(Lua for ESP8266)\u003cbr\u003eInput Power 4.75V ~ 12V\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x ESP-12F CP2102 Micro USB Development Board\u003cbr\u003e1 x 10 pin\u003cbr\u003e1 x 16 pin"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1757132455994,"title":"NANO V3.0 Controller Terminal Adapter Shield Expansion Board Nano AVR ATMEGA328P IO Module for Arduino","handle":"nano-v3-0-controller-terminal-adapter-shield-expansion-board-nano-avr-atmega328p-io-module-for-arduino","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a terminal adapter for the Arduino Nano.\u003c\/li\u003e\n\u003cli\u003eIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version(just have to remember that A0-A7 are in the reverse order).\u003c\/li\u003e\n\u003cli\u003eYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.\u003c\/li\u003e\n\u003cli\u003eBoard Size:5.2x3.5cm(approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*NANO 3.0 Controller Terminal Adapter","published_at":"2018-07-24T17:05:29+08:00","created_at":"2018-07-24T17:08:34+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","Nano","Nano V3.0","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16707171942458,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010816","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NANO V3.0 Controller Terminal Adapter Shield Expansion Board Nano AVR ATMEGA328P IO Module for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010816_w_508.jpg?v=1588646654","\/\/www.diymore.cc\/cdn\/shop\/products\/010816_c_396.jpg?v=1588646654","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_108.jpg?v=1588646654","\/\/www.diymore.cc\/cdn\/shop\/products\/010816_a_285.jpg?v=1588646654","\/\/www.diymore.cc\/cdn\/shop\/products\/010816_2w_847.jpg?v=1588646654","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0006_228.jpg?v=1588646654"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_w_508.jpg?v=1588646654","options":["Title"],"media":[{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678452731975,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_w_508.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_w_508.jpg?v=1588646654","width":1000},{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678452928583,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_c_396.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_c_396.jpg?v=1588646654","width":1000},{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678453026887,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_108.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_108.jpg?v=1588646654","width":1000},{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678453256263,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_a_285.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_a_285.jpg?v=1588646654","width":1000},{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678453354567,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_2w_847.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010816_2w_847.jpg?v=1588646654","width":1000},{"alt":"Nano V3.0 Controller Terminal Adapter Shield Expansion Board Nano Avr Atmega328P Io Module For","id":6678453747783,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0006_228.jpg?v=1588646654"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0006_228.jpg?v=1588646654","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a terminal adapter for the Arduino Nano.\u003c\/li\u003e\n\u003cli\u003eIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version(just have to remember that A0-A7 are in the reverse order).\u003c\/li\u003e\n\u003cli\u003eYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.\u003c\/li\u003e\n\u003cli\u003eBoard Size:5.2x3.5cm(approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*NANO 3.0 Controller Terminal Adapter"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1865002090554,"title":"12V One 1 Channel Relay Module Optocouple Board Shield PIC AVR Arduino","handle":"12v-one-1-channel-relay-module-optocouple-board-shield-for-pic-avr-arduino","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnboard EL817 optocoupler , strong anti-jamming capability with optical isolation\u003cbr\u003eOnboard 12V, 10A\/250VAC, 10A\/30VDC relay \u003cbr\u003eRelay life long continuous pull 100,000 times\u003cbr\u003eThe module can be directly and microcontroller I \/ O link , with an output signal indicating\u003cbr\u003eThe module has a freewheeling diode protection , short response time\u003cbr\u003ePCB dimensions : 47.0 (mm) x17.7 (mm)\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e1PCS*12V One 1 Channel Relay Module Optocouple Board Shield For PIC AVR DSP ARM MCU\u003c\/p\u003e","published_at":"2018-08-29T14:30:49+08:00","created_at":"2018-08-29T14:38:10+08:00","vendor":"diymore","type":"1-Channel Delay Relay","tags":["1865","18650","Arduino","Relay","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":129,"compare_at_price_min":129,"compare_at_price_max":129,"compare_at_price_varies":false,"variants":[{"id":18495182012474,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010147","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"12V One 1 Channel Relay Module Optocouple Board Shield PIC AVR Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":13,"compare_at_price":129,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_691.jpg?v=1588654908","\/\/www.diymore.cc\/cdn\/shop\/products\/0340-1_280.jpg?v=1588654908","\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_51a4ee38-357d-480c-9055-850d8bb04b1f_482.jpg?v=1588654908"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_691.jpg?v=1588654908","options":["Title"],"media":[{"alt":"12V One 1 Channel Relay Module Optocouple Board Shield For Pic Avr Arduino 1-Channel Delay","id":6678767140935,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_691.jpg?v=1588654908"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_691.jpg?v=1588654908","width":1000},{"alt":"12V One 1 Channel Relay Module Optocouple Board Shield For Pic Avr Arduino 1-Channel Delay","id":6678767730759,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-1_280.jpg?v=1588654908"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-1_280.jpg?v=1588654908","width":1000},{"alt":"12V One 1 Channel Relay Module Optocouple Board Shield For Pic Avr Arduino 1-Channel Delay","id":6678767894599,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_51a4ee38-357d-480c-9055-850d8bb04b1f_482.jpg?v=1588654908"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0340-2_51a4ee38-357d-480c-9055-850d8bb04b1f_482.jpg?v=1588654908","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnboard EL817 optocoupler , strong anti-jamming capability with optical isolation\u003cbr\u003eOnboard 12V, 10A\/250VAC, 10A\/30VDC relay \u003cbr\u003eRelay life long continuous pull 100,000 times\u003cbr\u003eThe module can be directly and microcontroller I \/ O link , with an output signal indicating\u003cbr\u003eThe module has a freewheeling diode protection , short response time\u003cbr\u003ePCB dimensions : 47.0 (mm) x17.7 (mm)\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e1PCS*12V One 1 Channel Relay Module Optocouple Board Shield For PIC AVR DSP ARM MCU\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$13.99
{"id":1860100849722,"title":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","handle":"3-2-inch-tft-lcd-5v-expansion-shield-touch-screen-with-touch-pen-for-arduino","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen","published_at":"2018-08-27T17:43:00+08:00","created_at":"2018-08-27T17:44:52+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Shield","UNO R3"],"price":1399,"price_min":1399,"price_max":1399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18399800459322,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X30543","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"3.2\" inch TFT LCD 5V Expansion Shield Touch Screen with Touch Pen for Arduino","public_title":null,"options":["Default Title"],"price":1399,"weight":30,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_225.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/2_740.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/3_365.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/4_536.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/5_682.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/7_161.jpg?v=1588654828","\/\/www.diymore.cc\/cdn\/shop\/products\/6_276.jpg?v=1588654828"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_225.jpg?v=1588654828","options":["Title"],"media":[{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764879943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_225.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_225.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764912711,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_740.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_740.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764945479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_365.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_365.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678764978247,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_536.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_536.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765011015,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_682.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_682.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765109319,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_161.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_161.jpg?v=1588654828","width":1000},{"alt":"3.2 Inch Tft Lcd 5V Expansion Shield Touch Screen With Pen For Arduino Display Module","id":6678765240391,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_276.jpg?v=1588654828"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_276.jpg?v=1588654828","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility.\u003c\/li\u003e\n\u003cli\u003eIt integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy.\u003c\/li\u003e\n\u003cli\u003eWith GPRS module, you can design your Arduino phone.\u003c\/li\u003e\n\u003cli\u003eWith NFC reader module, you can create access control systems with the photos show.\u003c\/li\u003e\n\u003cli\u003eWith voltage and current sensor, you can make oscilloscope.\u003c\/li\u003e\n\u003cli\u003eCan use it directly to display characters, graphics and BMP format images. And touch controlling is available;\u003c\/li\u003e\n\u003cli\u003eCompatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 \/ Arduino Mega2560 \/ Arduino Leonardo\u003c\/li\u003e\n\u003cli\u003eTouch screen type: resistive touchscreen.\u003c\/li\u003e\n\u003cli\u003eTouch Pen: length is 9cm;\u003c\/li\u003e\n\u003cli\u003eResolution: 240X400;\u003c\/li\u003e\n\u003cli\u003eDisplay size: 3.2 inch;\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 5V;\u003c\/li\u003e\n\u003cli\u003eLogic level: 5V \/ 3.3V;\u003c\/li\u003e\n\u003cli\u003eOn-board 3.3V \/ 300mA regulator circuit;\u003c\/li\u003e\n\u003cli\u003eOperating current: the maximum is 150mA\u003c\/li\u003e\n\u003cli\u003eUse the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 \/ D1 \/ D2 \/ D3 is available, please refer to the product schematics for the details.\u003c\/li\u003e\n\u003cli\u003eOnboard Micro SD slot, support Micro SD \/ TF Card;\u003c\/li\u003e\n\u003cli\u003eOnboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C\u003c\/li\u003e\n\u003cli\u003eVery suitable for digital photo frame, oscilloscope, function generator, detection system monitor\u003c\/li\u003e\n\u003cli\u003eSize: 9*5.3cm\/3.54\"*2.09\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Shield\u003cbr\u003e1*Touch pen"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1826105327674,"title":"UNO Arduino Prototyping Shield Board Module + Mini Breadboard","handle":"uno-arduino-prototyping-shield-board-module-mini-breadboard","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe breadboard sticks on the prototype shield with its self-adhesive backing\u003c\/li\u003e\n\u003cli\u003eSmall soldering area\u003c\/li\u003e\n\u003cli\u003eThe mini breadboard has 170 tie points\u003c\/li\u003e\n\u003cli\u003eSOIC place for IC\u003c\/li\u003e\n\u003cli\u003e1 reset button, 1 general use button, and 2 LED circuits can be used directly\u003c\/li\u003e\n\u003cli\u003ePrototype size:7cm x 5.5cm x 2cm\u003c\/li\u003e\n\u003cli\u003eMini breadboard size: 4.4 x3.4 x1cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Prototyping Prototype Shield Board\u003cbr\u003e1*Mini Breadboard 170 Points","published_at":"2018-08-16T12:12:15+08:00","created_at":"2018-08-16T12:14:10+08:00","vendor":"diymore","type":"Breadboard","tags":["Arduino","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":17855240175674,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010321","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"UNO Arduino Prototyping Shield Board Module + Mini Breadboard","public_title":null,"options":["Default Title"],"price":599,"weight":30,"compare_at_price":299,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010321_w_982.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/51DbGYc2fbL_380.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01504_390.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/51zwLQHf5cL_746.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01505_438.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-1_868.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-5_517.jpg?v=1588652550","\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600_321.jpg?v=1588652550"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321_w_982.jpg?v=1588652550","options":["Title"],"media":[{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693118023,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321_w_982.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321_w_982.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693380167,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/51DbGYc2fbL_380.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/51DbGYc2fbL_380.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693478471,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01504_390.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01504_390.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693511239,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/51zwLQHf5cL_746.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/51zwLQHf5cL_746.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693609543,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01505_438.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010321-E01505_438.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693740615,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-1_868.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-1_868.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693871687,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-5_517.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600-5_517.jpg?v=1588652550","width":1000},{"alt":"Uno Arduino Prototyping Shield Board Module + Mini Breadboard","id":6678693937223,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600_321.jpg?v=1588652550"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/s-l1600_321.jpg?v=1588652550","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe breadboard sticks on the prototype shield with its self-adhesive backing\u003c\/li\u003e\n\u003cli\u003eSmall soldering area\u003c\/li\u003e\n\u003cli\u003eThe mini breadboard has 170 tie points\u003c\/li\u003e\n\u003cli\u003eSOIC place for IC\u003c\/li\u003e\n\u003cli\u003e1 reset button, 1 general use button, and 2 LED circuits can be used directly\u003c\/li\u003e\n\u003cli\u003ePrototype size:7cm x 5.5cm x 2cm\u003c\/li\u003e\n\u003cli\u003eMini breadboard size: 4.4 x3.4 x1cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Prototyping Prototype Shield Board\u003cbr\u003e1*Mini Breadboard 170 Points"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1687132995642,"title":"Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino","handle":"diymore-nano-screw-terminal-adapter-shield-expansion-board-nano-v3-0-avr-atmega328p-au-module-for-arduino","description":"\u003cstrong\u003eThis is a small and simple Arduino nano expansion board.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIt will lead out all the Nano pins, it is convenient for us to wiring and experiment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe item is a terminal adapter, working very well for prototyping Arduino Nano projects\u003c\/li\u003e\n\u003cli\u003eIt can connect a large number of digital lines to an Arduino while maintaining the footprint of the original Nano\u003c\/li\u003e\n\u003cli\u003eYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.Great for temporary things you don't want to solder.\u003c\/li\u003e\n\u003cli\u003eThe board is fully assembled. No soldering required\u003c\/li\u003e\n\u003cli\u003eIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)\u003c\/li\u003e\n\u003cli\u003eSize: about 2.21\" x 1.65\" x 0.50\" (L* W* H)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x Nano Terminal Adapter Expansion Board","published_at":"2018-07-11T17:27:41+08:00","created_at":"2018-07-11T17:30:50+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","Nano","Nano V3.0","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15623091126330,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010094","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010094_1_711.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_3_707.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_8_410.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_4_326.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_2_460.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_7_436.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_6_478.jpg?v=1588643411","\/\/www.diymore.cc\/cdn\/shop\/products\/010094_5_395.jpg?v=1588643411"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_1_711.jpg?v=1588643411","options":["Title"],"media":[{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318153799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_1_711.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_1_711.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318284871,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_3_707.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_3_707.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318383175,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_8_410.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_8_410.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318579783,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_4_326.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_4_326.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318776391,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_2_460.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_2_460.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678318907463,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_7_436.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_7_436.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678319104071,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_6_478.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_6_478.jpg?v=1588643411","width":1000},{"alt":"Nano Screw Terminal Adapter Shield Expansion Board V3.0 Avr Atmega328P-Au Module For Arduino","id":6678319300679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_5_395.jpg?v=1588643411"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010094_5_395.jpg?v=1588643411","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eThis is a small and simple Arduino nano expansion board.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIt will lead out all the Nano pins, it is convenient for us to wiring and experiment.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe item is a terminal adapter, working very well for prototyping Arduino Nano projects\u003c\/li\u003e\n\u003cli\u003eIt can connect a large number of digital lines to an Arduino while maintaining the footprint of the original Nano\u003c\/li\u003e\n\u003cli\u003eYou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires.Great for temporary things you don't want to solder.\u003c\/li\u003e\n\u003cli\u003eThe board is fully assembled. No soldering required\u003c\/li\u003e\n\u003cli\u003eIt lables for Arduino Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)\u003c\/li\u003e\n\u003cli\u003eSize: about 2.21\" x 1.65\" x 0.50\" (L* W* H)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x Nano Terminal Adapter Expansion Board"}
Translation missing: en.products.product.regular_price
$18.99
{"id":1859982098490,"title":"Motor\/Stepper\/Servo\/Robot Shield for Arduino I2C v2 Kit w\/ PWM Driver TOP","handle":"motor-stepper-servo-robot-shield-for-arduino-i2c-v2-kit-w-pwm-driver-top","description":"Make your own Arduino motor party with a motor shield and a fine assortment of motors!\u003cbr\u003eThe original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:\u003cbr\u003e\u003cbr\u003eWe now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.\u003cbr\u003e\u003cbr\u003eInstead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.\u003cbr\u003e\u003cbr\u003eCompletely stackable design: \u003cbr\u003e5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors\u003cbr\u003e\u003cbr\u003eTested compatible with Arduino UNO, Leonardo, ADK\/Mega R3, Due, Diecimila \u0026amp; Duemilanove. Works with Mega\/ADK R2 and earlier with 2 wire jumpers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X Motor Shield","published_at":"2018-08-27T16:29:50+08:00","created_at":"2018-08-27T16:37:04+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Kits","Leonardo R3","Shield","UNO R3"],"price":1899,"price_min":1899,"price_max":1899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18396307030074,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010583","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Motor\/Stepper\/Servo\/Robot Shield for Arduino I2C v2 Kit w\/ PWM Driver TOP","public_title":null,"options":["Default Title"],"price":1899,"weight":26,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010583_6_799.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_3_559.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_4_516.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_1_976.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_7_831.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_2_142.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_8_587.jpg?v=1588654537","\/\/www.diymore.cc\/cdn\/shop\/products\/010583_5_745.jpg?v=1588654537"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_6_799.jpg?v=1588654537","options":["Title"],"media":[{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757605447,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_6_799.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_6_799.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757670983,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_3_559.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_3_559.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757736519,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_4_516.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_4_516.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757802055,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_1_976.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_1_976.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757867591,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_7_831.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_7_831.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678757965895,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_2_142.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_2_142.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678758096967,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_8_587.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_8_587.jpg?v=1588654537","width":1000},{"alt":"Motor\/stepper\/servo\/robot Shield For Arduino I2C V2 Kit W\/ Pwm Driver Top Motor Module","id":6678758162503,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_5_745.jpg?v=1588654537"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010583_5_745.jpg?v=1588654537","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Make your own Arduino motor party with a motor shield and a fine assortment of motors!\u003cbr\u003eThe original L293D Motorshield kit is one of our most beloved kits, We kept the ability to drive up to 4 DC motors or 2 stepper motors, but added many improvements:\u003cbr\u003e\u003cbr\u003eWe now have the TB6612 MOSFET driver: with 1.2A per channel and 3A peak current capability. It also has much lower voltage drops across the motor so you get more torque out of your batteries, and there are built-in flyback diodes as well.\u003cbr\u003e\u003cbr\u003eInstead of using a latch and the Arduino's PWM pins, we have a fully-dedicated PWM driver chip onboard. This chip handles all the motor and speed controls over I2C. Only two pins (SDA \u0026amp; SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or shields to the same pins. This also makes it drop-in compatible with any Arduino, such as the Uno, Due, Leonardo and Mega R3.\u003cbr\u003e\u003cbr\u003eCompletely stackable design: \u003cbr\u003e5 address-select pins means up to 32 stackable shields: that's 64 steppers or 128 DC motors\u003cbr\u003e\u003cbr\u003eTested compatible with Arduino UNO, Leonardo, ADK\/Mega R3, Due, Diecimila \u0026amp; Duemilanove. Works with Mega\/ADK R2 and earlier with 2 wire jumpers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X Motor Shield"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1848446222394,"title":"Data Logger Module Logging Shield Data Recorder DS1307 for Arduino UNO SD Card","handle":"data-logger-module-logging-shield-data-recorder-ds1307-for-arduino-uno-sd-card","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003cbr\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years\u003cbr\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.\u003cbr\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003cbr\u003eWorks with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK\/Mega R3 or higher. \u003cbr\u003eADK\/Mega R2 or lower are not supported\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:Battery is CR1220 3V,we ship without battery!Hope you can understand.\u003c\/strong\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PCS*Data Module Logging Shield Data Recorder Shield for Arduino UNO SD Card","published_at":"2018-08-23T14:58:10+08:00","created_at":"2018-08-23T15:03:12+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Leonardo R3","Shield","UNO R3"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":290,"compare_at_price_min":290,"compare_at_price_max":290,"compare_at_price_varies":false,"variants":[{"id":18161403658298,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010350","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Data Logger Module Logging Shield Data Recorder DS1307 for Arduino UNO SD Card","public_title":null,"options":["Default Title"],"price":599,"weight":22,"compare_at_price":290,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010350_1_302.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_2_167.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_3_515.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_4_488.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_5_467.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_6_222.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_8_230.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_9_184.jpg?v=1588653658","\/\/www.diymore.cc\/cdn\/shop\/products\/010350_10_958.jpg?v=1588653658"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_1_302.jpg?v=1588653658","options":["Title"],"media":[{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678726737991,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_1_302.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_1_302.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678726869063,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_2_167.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_2_167.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678726934599,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_3_515.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_3_515.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678727032903,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_4_488.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_4_488.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678727262279,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_5_467.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_5_467.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678727426119,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_6_222.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_6_222.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678727786567,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_8_230.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_8_230.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678727983175,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_9_184.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_9_184.jpg?v=1588653658","width":1000},{"alt":"Data Logger Module Logging Shield Recorder Ds1307 For Arduino Uno Sd Card Expansion","id":6678728081479,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_10_958.jpg?v=1588653658"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010350_10_958.jpg?v=1588653658","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003cbr\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years\u003cbr\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.\u003cbr\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003cbr\u003eWorks with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK\/Mega R3 or higher. \u003cbr\u003eADK\/Mega R2 or lower are not supported\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:Battery is CR1220 3V,we ship without battery!Hope you can understand.\u003c\/strong\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PCS*Data Module Logging Shield Data Recorder Shield for Arduino UNO SD Card"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1842634686522,"title":"5Pin JoyStick Breakout Module Shield PS2 Joystick Game Controller AL","handle":"5pin-joystick-breakout-module-shield-ps2-joystick-game-controller-al","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.\u003cbr\u003ePhillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. \u003cbr\u003eThis module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, \u003cbr\u003eWhen pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; \u003cbr\u003ePress the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage included：\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e1 x 5Pin JoyStick Breakout Module Shield PS2 Joystick Game Controller F Arduino\u003c\/p\u003e","published_at":"2018-08-21T16:56:29+08:00","created_at":"2018-08-21T16:58:54+08:00","vendor":"diymore","type":"Function Module","tags":["Arduino","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18087777009722,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010595","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5Pin JoyStick Breakout Module Shield PS2 Joystick Game Controller AL","public_title":null,"options":["Default Title"],"price":599,"weight":11,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf_666.jpg?v=1588653034","\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf3_702.jpg?v=1588653034"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf_666.jpg?v=1588653034","options":["Title"],"media":[{"alt":"5Pin Joystick Breakout Module Shield Ps2 Joystick Game Controller Al Function","id":6678707535943,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf_666.jpg?v=1588653034"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf_666.jpg?v=1588653034","width":1000},{"alt":"5Pin Joystick Breakout Module Shield Ps2 Joystick Game Controller Al Function","id":6678707601479,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf3_702.jpg?v=1588653034"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010595_cf3_702.jpg?v=1588653034","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.\u003cbr\u003ePhillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. \u003cbr\u003eThis module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, \u003cbr\u003eWhen pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; \u003cbr\u003ePress the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage included：\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e1 x 5Pin JoyStick Breakout Module Shield PS2 Joystick Game Controller F Arduino\u003c\/p\u003e"}
$3.99
{"id":1788060336186,"title":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino","handle":"micro-sd-storage-board-mciro-sd-tf-card-memory-spi-shield-module-for-arduino","description":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-02T19:00:06+08:00","created_at":"2018-08-02T19:05:39+08:00","vendor":"diymore","type":"TF Card Module","tags":["Arduino","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645198086215,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"010189","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645198118983,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0101895","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Storage Board Mciro SD TF Card Memory SPI Shield Module For Arduino - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","options":["Size"],"media":[{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557491271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/asfda_902.jpg?v=1588649522","width":1000},{"alt":"Micro Sd Storage Board Mciro Tf Card Memory Spi Shield Module For Arduino","id":6678557524039,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/das_205.jpg?v=1588649522","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eControl Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;\u003c\/li\u003e\n\u003cli\u003e3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply;\u003c\/li\u003e\n\u003cli\u003eLevel conversion circuit: Micro SD card into the direction of signals into 3.3V, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal;\u003c\/li\u003e\n\u003cli\u003eMicro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003c\/li\u003e\n\u003cli\u003ePositioning holes: 4 M2 screws positioning hole diameter of 2.2mm, the module is easy to install positioning, to achieve inter-module combination;\u003c\/li\u003e\n\u003cli\u003eArduino users can directly use the Arduino IDE comes with an SD card to complete the library card initialization and read-write\u003c\/li\u003e\n\u003cli\u003eThe module (MicroSD Card Adapter) is a Micro SD card reader module, and the SPI interface via the file system driver, microcontroller system to complete the MicroSD card read and write files.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eModule features are as follows:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e Support Micro SD Card, Micro SDHC card (high-speed card)\u003c\/li\u003e\n\u003cli\u003ethe level conversion circuit board that can interface level is 5V or 3.3V\u003c\/li\u003e\n\u003cli\u003epower supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board\u003c\/li\u003e\n\u003cli\u003eCommunication interface is a standard SPI interface\u003c\/li\u003e\n\u003cli\u003e4 M2 screw positioning holes for easy installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003e\u003cspan\u003ePackage\u003c\/span\u003e Include:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Micor SD TF Card Shield Expansion Board for Arduino\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1776578691130,"title":"WeMos D1 5-9V USB NodeMcu Lua V3 CH340G ESP8266 Wireless Internet Development AT","handle":"wemos-d1-5-9v-usb-nodemcu-lua-v3-ch340g-esp8266-wireless-internet-development-at","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eNodemcu V3 Lua WiFi module integrated ESP8266 + additional memory 32M FLASH, USB serial port ch340g\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi modern ESP8266 + 32MB, the module is based on a wide range of exploration ESP8266 system chip from expressif.\u003c\/li\u003e\n\u003cli\u003eWiFi modern ESP8266 + 32MB, compatible with nodemcu board. We add an extra memory size of 32MB. This is better for big library projects. You do not have to worry about the size of the memory.\u003c\/li\u003e\n\u003cli\u003eOn board there are usb-ttl serial converter ch340g, mini USB socket. DC 4 ~ 9v PowerIn pin VIN. Pitch 2.54mm (0.1 \") 15 x 2-wire pin set. Do not solder.\u003c\/li\u003e\n\u003cli\u003eCombine WiFi access point and feature station + microcontrollers using Lua programming language is simple. WiFi Modern ESP8266 + 32MB, provides: arduin0 hardware IO.\u003c\/li\u003e\n\u003cli\u003eCan be used in the arduin0 IDE event-driven API network application 10 d0-d10, PWM function programming, IIC and SPI communication, in a board WiFi wireless network and ADC (A0, etc. can be used as an access point and \/ or station, host Server), connect to the Internet, get or upload data, and the developing board can use the mounting board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage included:\u003c\/strong\u003e\u003cbr\u003e1 x WeMos D1 CH340G Development Board","published_at":"2018-07-30T10:51:18+08:00","created_at":"2018-07-30T11:14:17+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["ESP8266","Shield","Wireless"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17011621265466,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040244","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WeMos D1 5-9V USB NodeMcu Lua V3 CH340G ESP8266 Wireless Internet Development AT","public_title":null,"options":["Default Title"],"price":599,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040244_1_559.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_10_774.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_11_811.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_2_383.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_3_772.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_4_610.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_5_548.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_7_910.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_9_550.jpg?v=1588648279","\/\/www.diymore.cc\/cdn\/shop\/products\/040244_13_334.jpg?v=1588648279"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_1_559.jpg?v=1588648279","options":["Title"],"media":[{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678513877063,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_1_559.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_1_559.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514008135,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_10_774.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_10_774.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514171975,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_11_811.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_11_811.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514270279,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_2_383.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_2_383.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514368583,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_3_772.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_3_772.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514434119,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_4_610.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_4_610.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514565191,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_5_548.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_5_548.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514761799,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_7_910.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_7_910.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514794567,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_9_550.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_9_550.jpg?v=1588648279","width":1000},{"alt":"Wemos D1 5-9V Usb Nodemcu Lua V3 Ch340G Esp8266 Wireless Internet Development At Expansion Shield","id":6678514827335,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_13_334.jpg?v=1588648279"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040244_13_334.jpg?v=1588648279","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eNodemcu V3 Lua WiFi module integrated ESP8266 + additional memory 32M FLASH, USB serial port ch340g\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWiFi modern ESP8266 + 32MB, the module is based on a wide range of exploration ESP8266 system chip from expressif.\u003c\/li\u003e\n\u003cli\u003eWiFi modern ESP8266 + 32MB, compatible with nodemcu board. We add an extra memory size of 32MB. This is better for big library projects. You do not have to worry about the size of the memory.\u003c\/li\u003e\n\u003cli\u003eOn board there are usb-ttl serial converter ch340g, mini USB socket. DC 4 ~ 9v PowerIn pin VIN. Pitch 2.54mm (0.1 \") 15 x 2-wire pin set. Do not solder.\u003c\/li\u003e\n\u003cli\u003eCombine WiFi access point and feature station + microcontrollers using Lua programming language is simple. WiFi Modern ESP8266 + 32MB, provides: arduin0 hardware IO.\u003c\/li\u003e\n\u003cli\u003eCan be used in the arduin0 IDE event-driven API network application 10 d0-d10, PWM function programming, IIC and SPI communication, in a board WiFi wireless network and ADC (A0, etc. can be used as an access point and \/ or station, host Server), connect to the Internet, get or upload data, and the developing board can use the mounting board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage included:\u003c\/strong\u003e\u003cbr\u003e1 x WeMos D1 CH340G Development Board"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1776533471290,"title":"V3 Engraver 3D Printer New CNC Shield Expansion Board A4988 Driver for Arduino","handle":"v3-engraver-3d-printer-new-cnc-shield-expansion-board-a4988-driver-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers\u003c\/li\u003e\n\u003cli\u003eIt is a total of four slots, can drive four A4988 stepper motor\u003c\/li\u003e\n\u003cli\u003eEach road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use\u003c\/li\u003e\n\u003cli\u003eUNO for Arduino module IO port correspondence introduction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x A4988 Expansion Board V3.0","published_at":"2018-07-30T10:24:35+08:00","created_at":"2018-07-30T10:27:15+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17010078056506,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"070022","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"V3 Engraver 3D Printer New CNC Shield Expansion Board A4988 Driver for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":35,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/070022_1_504.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_12_353.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_2_809.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_3_963.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_4_292.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_11_774.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_6_527.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_7_701.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_9_369.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_10_789.jpg?v=1588648205","\/\/www.diymore.cc\/cdn\/shop\/products\/070022_13_585.jpg?v=1588648205"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_1_504.jpg?v=1588648205","options":["Title"],"media":[{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510207047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_1_504.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_1_504.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510239815,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_12_353.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_12_353.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510305351,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_2_809.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_2_809.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510338119,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_3_963.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_3_963.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510370887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_4_292.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_4_292.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510600263,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_11_774.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_11_774.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510665799,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_6_527.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_6_527.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510698567,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_7_701.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_7_701.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678510960711,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_9_369.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_9_369.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678511091783,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_10_789.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_10_789.jpg?v=1588648205","width":1000},{"alt":"V3 Engraver 3D Printer New Cnc Shield Expansion Board A4988 Driver For Arduino Motor Module","id":6678511190087,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_13_585.jpg?v=1588648205"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/070022_13_585.jpg?v=1588648205","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis expansion board as a driver expansion board, can be used for engraving machines, 3D printers\u003c\/li\u003e\n\u003cli\u003eIt is a total of four slots, can drive four A4988 stepper motor\u003c\/li\u003e\n\u003cli\u003eEach road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use\u003c\/li\u003e\n\u003cli\u003eUNO for Arduino module IO port correspondence introduction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x A4988 Expansion Board V3.0"}
Translation missing: en.products.product.regular_price
$6.99
{"id":1733296291898,"title":"D1 mini V3.0.0-WIFI Internet of Things ESP8266 4MB Based Development Board","handle":"wemos-d1-mini-v3-0-0-development-board-esp8266-4mb-wifi-internet-of-things-compatible-with-arduino-micropython-nodemcu","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA simple wifi board with 4MB flash based on ESP8266\u003c\/li\u003e\n\u003cli\u003eDefault firmware: lastest MicroPython ESP8266 firmware\u003c\/li\u003e\n\u003cli\u003eAdd Deep-Sleep jumper\u003c\/li\u003e\n\u003cli\u003eOptimize the circuit\u003c\/li\u003e\n\u003cli\u003e11 digital input\/output pins, all pins have interrupt\/pwm\/I2C\/one-wire supported(except D0)\u003c\/li\u003e\n\u003cli\u003e1 analog input(3.2V max input)\u003c\/li\u003e\n\u003cli\u003ea Micro USB connection\u003c\/li\u003e\n\u003cli\u003elots of shields\u003c\/li\u003e\n\u003cli\u003eCompatible with MicroPython, Arduino, Nodemcu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*WEMOS D1 mini V3.0 Development Board\u003c\/li\u003e\n\u003cli\u003e2*Long femalepins\u003c\/li\u003e\n\u003cli\u003e2*Short female pins\u003c\/li\u003e\n\u003cli\u003e2*.Normal pins\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-07-19T14:53:25+08:00","created_at":"2018-07-19T14:57:03+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","ESP8266","Shield"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16296359493690,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040287","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"D1 mini V3.0.0-WIFI Internet of Things ESP8266 4MB Based Development Board","public_title":null,"options":["Default Title"],"price":699,"weight":15,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/2_0861d8d1-e21d-498d-8d74-8b70a358e022_283.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/6_ea83cd34-f9cb-4747-b9a8-d5032864dd2c_471.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/040287_4_422.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/5_4b44eeb9-cf21-467c-8540-4a0a0b0ccb1f_174.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/3_dd1af0f8-dfda-4cfd-94c4-d83eb0e6b618_855.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/4_a7e869af-f95f-4c08-8480-68061b62bf2c_616.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/8_1e58e385-1abf-432d-971e-b347bd2c4c10_583.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/7_656b428d-b09a-4c75-8c16-398d8f503080_740.jpg?v=1588644979","\/\/www.diymore.cc\/cdn\/shop\/products\/9_889.jpg?v=1588644979"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_0861d8d1-e21d-498d-8d74-8b70a358e022_283.jpg?v=1588644979","options":["Title"],"media":[{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388310087,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_0861d8d1-e21d-498d-8d74-8b70a358e022_283.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_0861d8d1-e21d-498d-8d74-8b70a358e022_283.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388342855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ea83cd34-f9cb-4747-b9a8-d5032864dd2c_471.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_ea83cd34-f9cb-4747-b9a8-d5032864dd2c_471.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388408391,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040287_4_422.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040287_4_422.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388473927,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_4b44eeb9-cf21-467c-8540-4a0a0b0ccb1f_174.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_4b44eeb9-cf21-467c-8540-4a0a0b0ccb1f_174.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388539463,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_dd1af0f8-dfda-4cfd-94c4-d83eb0e6b618_855.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_dd1af0f8-dfda-4cfd-94c4-d83eb0e6b618_855.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388604999,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_a7e869af-f95f-4c08-8480-68061b62bf2c_616.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_a7e869af-f95f-4c08-8480-68061b62bf2c_616.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388736071,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/8_1e58e385-1abf-432d-971e-b347bd2c4c10_583.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/8_1e58e385-1abf-432d-971e-b347bd2c4c10_583.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388801607,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_656b428d-b09a-4c75-8c16-398d8f503080_740.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_656b428d-b09a-4c75-8c16-398d8f503080_740.jpg?v=1588644979","width":1000},{"alt":"Wemos D1 Mini V3.0.0 Development Board Esp8266 4Mb Wifi Internet Of Things Compatible With Arduino","id":6678388834375,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/9_889.jpg?v=1588644979"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/9_889.jpg?v=1588644979","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eA simple wifi board with 4MB flash based on ESP8266\u003c\/li\u003e\n\u003cli\u003eDefault firmware: lastest MicroPython ESP8266 firmware\u003c\/li\u003e\n\u003cli\u003eAdd Deep-Sleep jumper\u003c\/li\u003e\n\u003cli\u003eOptimize the circuit\u003c\/li\u003e\n\u003cli\u003e11 digital input\/output pins, all pins have interrupt\/pwm\/I2C\/one-wire supported(except D0)\u003c\/li\u003e\n\u003cli\u003e1 analog input(3.2V max input)\u003c\/li\u003e\n\u003cli\u003ea Micro USB connection\u003c\/li\u003e\n\u003cli\u003elots of shields\u003c\/li\u003e\n\u003cli\u003eCompatible with MicroPython, Arduino, Nodemcu\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*WEMOS D1 mini V3.0 Development Board\u003c\/li\u003e\n\u003cli\u003e2*Long femalepins\u003c\/li\u003e\n\u003cli\u003e2*Short female pins\u003c\/li\u003e\n\u003cli\u003e2*.Normal pins\u003c\/li\u003e\n\u003c\/ul\u003e"}
20% OFF
Translation missing: en.products.product.regular_price
$9.99
$7.99
On Sale
{"id":1686639280186,"title":"1PCS 1.8\" 128x160 TFT LCD Shield SPI serial interface Module For Arduino Esplora","handle":"diymore-1-8-inch-128x160-tft-lcd-shield-module-spi-serial-interface-for-arduino-esplora","description":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe screen is 1.77\" diagonal, with 160 x 128 pixel resolution.\u003c\/li\u003e\n\u003cli\u003eThe TFT library interfaces with the screen's controller through SPI when using the TFT library.\u003c\/li\u003e\n\u003cli\u003eThe screen runs on +5 VDC\u003c\/li\u003e\n\u003cli\u003eThe micro-SD slot is accessible through the SD card library.\u003c\/li\u003e\n\u003cli\u003eThe LED backlight is dimmable by PWM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe LCD screen is a backlit TFT LCD screen with headers.\u003c\/li\u003e\n\u003cli\u003eYou can draw text, images, and shapes to the screen with the GLCD library.\u003c\/li\u003e\n\u003cli\u003eThere is an onboard micro-SD card slot on the back of the screen that can, among other things, store bitmap images for the screen to display.\u003c\/li\u003e\n\u003cli\u003eThe screen's headers are designed to fit into the socket on the front of Esplora, but it is compatible with any AVR-based (Uno, Leonardo), Datasheet You can use this module with Esplora.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 1.8\" inch 128x160 TFT LCD Shield Module","published_at":"2018-07-11T16:16:45+08:00","created_at":"2018-07-11T16:21:51+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Raspberry Pi","Shield"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":999,"compare_at_price_min":999,"compare_at_price_max":999,"compare_at_price_varies":false,"variants":[{"id":15612396568634,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"030017","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1PCS 1.8\" 128x160 TFT LCD Shield SPI serial interface Module For Arduino Esplora","public_title":null,"options":["Default Title"],"price":799,"weight":20,"compare_at_price":999,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/030017_1_835.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_3_544.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_9_162.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_4_817.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_5_886.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_6_274.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_7_510.jpg?v=1588643312","\/\/www.diymore.cc\/cdn\/shop\/products\/030017_8_682.jpg?v=1588643312"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_1_835.jpg?v=1588643312","options":["Title"],"media":[{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678312517703,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_1_835.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_1_835.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678312714311,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_3_544.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_3_544.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678313074759,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_9_162.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_9_162.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678313304135,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_4_817.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_4_817.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678313599047,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_5_886.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_5_886.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678313828423,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_6_274.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_6_274.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678313992263,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_7_510.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_7_510.jpg?v=1588643312","width":1000},{"alt":"1.8 Inch 128X160 Tft Lcd Shield Module Spi Serial Interface For Arduino Esplora Display","id":6678314123335,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_8_682.jpg?v=1588643312"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/030017_8_682.jpg?v=1588643312","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe screen is 1.77\" diagonal, with 160 x 128 pixel resolution.\u003c\/li\u003e\n\u003cli\u003eThe TFT library interfaces with the screen's controller through SPI when using the TFT library.\u003c\/li\u003e\n\u003cli\u003eThe screen runs on +5 VDC\u003c\/li\u003e\n\u003cli\u003eThe micro-SD slot is accessible through the SD card library.\u003c\/li\u003e\n\u003cli\u003eThe LED backlight is dimmable by PWM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe LCD screen is a backlit TFT LCD screen with headers.\u003c\/li\u003e\n\u003cli\u003eYou can draw text, images, and shapes to the screen with the GLCD library.\u003c\/li\u003e\n\u003cli\u003eThere is an onboard micro-SD card slot on the back of the screen that can, among other things, store bitmap images for the screen to display.\u003c\/li\u003e\n\u003cli\u003eThe screen's headers are designed to fit into the socket on the front of Esplora, but it is compatible with any AVR-based (Uno, Leonardo), Datasheet You can use this module with Esplora.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 1.8\" inch 128x160 TFT LCD Shield Module"}
Translation missing: en.products.product.regular_price
$7.99
{"id":2037880193082,"title":"DC 5V 4 Channel Relay Shield Terminal Expended Board for Arduino","handle":"dc-5v-4-channel-relay-shield-terminal-expended-board-for-arduino","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThe Relay Shield provides four high quality relay that can control high current loads to Arduino boards. \u003cbr\u003eIt also provides NO (Normally Open) \/ NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I\/Os\u003cbr\u003eStandardized shield form factor enables smooth connection with Arduino and compatibles. \u003cbr\u003eThe shield also has four LED indicators to show the on\/off state of each relay.Relays are useful in switching on\/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc...\u003cbr\u003eDigital 4 – controls RELAY4’s COM4 pin (located in J4)\u003cbr\u003eDigital 5 – controls RELAY3’s COM3 pin (located in J3)\u003cbr\u003eDigital 6 – controls RELAY2’s COM2 pin (located in J2)\u003cbr\u003eDigital 7 – controls RELAY1’s COM1 pin (located in J1)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DC 5V 4 Channel Relay Shield","published_at":"2018-10-17T16:30:46+08:00","created_at":"2018-10-17T16:39:16+08:00","vendor":"diymore","type":"4-Channel Delay Relay","tags":["Arduino","Relay","Shield"],"price":799,"price_min":799,"price_max":799,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20482276065338,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012617","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"DC 5V 4 Channel Relay Shield Terminal Expended Board for Arduino","public_title":null,"options":["Default Title"],"price":799,"weight":60,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012617_1_383.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_2_600.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_3_708.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_4_974.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_5_728.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_6_224.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_7_243.jpg?v=1588657855","\/\/www.diymore.cc\/cdn\/shop\/products\/012617_8_436.jpg?v=1588657855"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_1_383.jpg?v=1588657855","options":["Title"],"media":[{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886678599,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_1_383.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_1_383.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886711367,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_2_600.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_2_600.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886744135,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_3_708.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_3_708.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886776903,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_4_974.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_4_974.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886809671,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_5_728.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_5_728.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886842439,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_6_224.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_6_224.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678886875207,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_7_243.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_7_243.jpg?v=1588657855","width":1000},{"alt":"Dc 5V 4 Channel Relay Shield Terminal Expended Board For Arduino 4-Channel Delay","id":6678887432263,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_8_436.jpg?v=1588657855"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012617_8_436.jpg?v=1588657855","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThe Relay Shield provides four high quality relay that can control high current loads to Arduino boards. \u003cbr\u003eIt also provides NO (Normally Open) \/ NC (Normally Closed) interface. It could be a nice solution for controlling devices that could not be directly controlled by Arduino's Digital I\/Os\u003cbr\u003eStandardized shield form factor enables smooth connection with Arduino and compatibles. \u003cbr\u003eThe shield also has four LED indicators to show the on\/off state of each relay.Relays are useful in switching on\/off AC appliances like fan, light, motor or high current DC actuators like solenoid valve etc...\u003cbr\u003eDigital 4 – controls RELAY4’s COM4 pin (located in J4)\u003cbr\u003eDigital 5 – controls RELAY3’s COM3 pin (located in J3)\u003cbr\u003eDigital 6 – controls RELAY2’s COM2 pin (located in J2)\u003cbr\u003eDigital 7 – controls RELAY1’s COM1 pin (located in J1)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x DC 5V 4 Channel Relay Shield"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1970383814714,"title":"Arduino UNO 2011 MEGA 2560 Prototype Shield ProtoShield V3 with min breadboard 170","handle":"arduino-uno-2011-mega-2560-prototype-shield-protoshield-v3-with-min-breadboard-170","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1. Arduino MEGA \/ MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.\u003cbr\u003e\u003cbr\u003e2. The board can receive Arduino MEGA \/ MEGA2560 seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn Arduino MEGA \/ MEGA2560 preferred prototype controller expansion board.\u003cbr\u003e\u003cbr\u003e3. Full Compatible with Arduino Mega ATmega1280 \/ MEGA2560.\u003cbr\u003e\u003cbr\u003e4. Size:20cm x 15cm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Proto shield V3.0\u003cbr\u003e1*Mini Breadboard 170 points","published_at":"2018-09-30T14:31:27+08:00","created_at":"2018-09-30T14:33:29+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19835269283898,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010317","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Arduino UNO 2011 MEGA 2560 Prototype Shield ProtoShield V3 with min breadboard 170","public_title":null,"options":["Default Title"],"price":499,"weight":45,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010317_1_692.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_2_319.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_3_393.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_4_720.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_6_372.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_7_469.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_8_546.jpg?v=1588657074","\/\/www.diymore.cc\/cdn\/shop\/products\/010317_5_620.jpg?v=1588657074"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_1_692.jpg?v=1588657074","options":["Title"],"media":[{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854041671,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_1_692.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_1_692.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854205511,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_2_319.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_2_319.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854238279,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_3_393.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_3_393.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854336583,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_4_720.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_4_720.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854402119,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_6_372.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_6_372.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854467655,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_7_469.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_7_469.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854533191,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_8_546.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_8_546.jpg?v=1588657074","width":1000},{"alt":"Arduino Uno 2011 Mega 2560 Prototype Shield Protoshield V3 With Min Breadboard 170 Adapter Module","id":6678854565959,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_5_620.jpg?v=1588657074"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010317_5_620.jpg?v=1588657074","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1. Arduino MEGA \/ MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.\u003cbr\u003e\u003cbr\u003e2. The board can receive Arduino MEGA \/ MEGA2560 seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn Arduino MEGA \/ MEGA2560 preferred prototype controller expansion board.\u003cbr\u003e\u003cbr\u003e3. Full Compatible with Arduino Mega ATmega1280 \/ MEGA2560.\u003cbr\u003e\u003cbr\u003e4. Size:20cm x 15cm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Proto shield V3.0\u003cbr\u003e1*Mini Breadboard 170 points"}
Translation missing: en.products.product.regular_price
$9.99
{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1815673897018,"title":"Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA2560 R3","handle":"mini-motor-drive-shield-expansion-board-l293d-module-for-arduino-uno-mega2560-r3","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors.\u003c\/li\u003e\n\u003cli\u003eTo simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included.\u003c\/li\u003e\n\u003cli\u003eThis device is suitable for use in switching applications at frequencies up to 5 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eNew L293D motor shield, the input voltage DC4.5-25V\u003c\/li\u003e\n\u003cli\u003e600mA output current capability per channel\u003c\/li\u003e\n\u003cli\u003e1.2A peak output current(non repetitive) per channel\u003c\/li\u003e\n\u003cli\u003eEnable facility\u003c\/li\u003e\n\u003cli\u003eOvertemperature protection\u003c\/li\u003e\n\u003cli\u003eLogical \"0\" input voltage up to 1.5V(High noise immunity)\u003c\/li\u003e\n\u003cli\u003eInternal clamp diodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included：\u003c\/strong\u003e\u003cbr\u003e1 x Mini L293D Motor Drive Shield","published_at":"2018-08-13T16:26:00+08:00","created_at":"2018-08-13T16:28:16+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","MEGA2560","Relay","Shield","UNO R3"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17690549452858,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010073","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA2560 R3","public_title":null,"options":["Default Title"],"price":499,"weight":12,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010073_1_417.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_2_260.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_3_113.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_6_770.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_7_766.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_8_504.jpg?v=1588651498","\/\/www.diymore.cc\/cdn\/shop\/products\/010073_10_433.jpg?v=1588651498"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_1_417.jpg?v=1588651498","options":["Title"],"media":[{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678659956807,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_1_417.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_1_417.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678660317255,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_2_260.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_2_260.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678660513863,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_3_113.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_3_113.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678660579399,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_6_770.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_6_770.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678660907079,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_7_766.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_7_766.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678661038151,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_8_504.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_8_504.jpg?v=1588651498","width":1000},{"alt":"Mini Motor Drive Shield Expansion Board L293D Module For Arduino Uno Mega2560 R3 Adapter","id":6678661201991,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_10_433.jpg?v=1588651498"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010073_10_433.jpg?v=1588651498","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe Device is a mnolithic integrated high voltage,high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power transistors.\u003c\/li\u003e\n\u003cli\u003eTo simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included.\u003c\/li\u003e\n\u003cli\u003eThis device is suitable for use in switching applications at frequencies up to 5 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eNew L293D motor shield, the input voltage DC4.5-25V\u003c\/li\u003e\n\u003cli\u003e600mA output current capability per channel\u003c\/li\u003e\n\u003cli\u003e1.2A peak output current(non repetitive) per channel\u003c\/li\u003e\n\u003cli\u003eEnable facility\u003c\/li\u003e\n\u003cli\u003eOvertemperature protection\u003c\/li\u003e\n\u003cli\u003eLogical \"0\" input voltage up to 1.5V(High noise immunity)\u003c\/li\u003e\n\u003cli\u003eInternal clamp diodes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included：\u003c\/strong\u003e\u003cbr\u003e1 x Mini L293D Motor Drive Shield"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1798064177210,"title":"Micro SD Wemos D1 Mini Data Logger Shield+RTC DS1307 Clock for Arduino\/Raspberry","handle":"micro-sd-wemos-d1-mini-data-logger-shield-rtc-ds1307-clock-for-arduino-raspberry","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith this Data Log Shield for WiFi D1 Mini board, can saving data to files on any FAT16 or FAT32 formatted MicroSD card.\u003c\/li\u003e\n\u003cli\u003eThe included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when!\u003c\/li\u003e\n\u003cli\u003eSD card interface works with FAT16 or FAT32 formatted cards.\u003c\/li\u003e\n\u003cli\u003eReal time clock (RTC) keeps the time going even when the power disconnected. The coin cell battery backup last date and time.\u003c\/li\u003e\n\u003cli\u003eRTC protected from wrong connecting of battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePinout:\u003c\/strong\u003e\u003cbr\u003eRTC:\u003cbr\u003eD1 - SCL\u003cbr\u003eD2 - SDA\u003cbr\u003eCD card:\u003cbr\u003eD5 - CLK\u003cbr\u003eD6 - DO\u003cbr\u003eD7 - DI\u003cbr\u003eD8 - CS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x Wemos D1 Mini Data Logger Shield","published_at":"2018-08-06T12:28:55+08:00","created_at":"2018-08-06T14:03:06+08:00","vendor":"diymore","type":"Clock Module","tags":["Arduino","Pro Micro","Raspberry Pi","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17366519087162,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012439","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Micro SD Wemos D1 Mini Data Logger Shield+RTC DS1307 Clock for Arduino\/Raspberry","public_title":null,"options":["Default Title"],"price":499,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012439_2_482.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_1_895.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_3_153.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_4_309.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_5_460.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_6_359.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_7_231.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_8_799.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_9_588.jpg?v=1588650246","\/\/www.diymore.cc\/cdn\/shop\/products\/012439_10_248.jpg?v=1588650246"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_2_482.jpg?v=1588650246","options":["Title"],"media":[{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678580887623,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_2_482.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_2_482.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678580953159,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_1_895.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_1_895.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678581051463,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_3_153.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_3_153.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678581641287,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_4_309.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_4_309.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582100039,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_5_460.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_5_460.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582132807,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_6_359.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_6_359.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582231111,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_7_231.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_7_231.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582263879,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_8_799.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_8_799.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582329415,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_9_588.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_9_588.jpg?v=1588650246","width":1000},{"alt":"Micro Sd Wemos D1 Mini Data Logger Shield+Rtc Ds1307 Clock For Arduino\/raspberry Module","id":6678582427719,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_10_248.jpg?v=1588650246"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012439_10_248.jpg?v=1588650246","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith this Data Log Shield for WiFi D1 Mini board, can saving data to files on any FAT16 or FAT32 formatted MicroSD card.\u003c\/li\u003e\n\u003cli\u003eThe included RTC (Real Time Clock) can be used to timestamp all your data with the current time, so that you know precisely what happened when!\u003c\/li\u003e\n\u003cli\u003eSD card interface works with FAT16 or FAT32 formatted cards.\u003c\/li\u003e\n\u003cli\u003eReal time clock (RTC) keeps the time going even when the power disconnected. The coin cell battery backup last date and time.\u003c\/li\u003e\n\u003cli\u003eRTC protected from wrong connecting of battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePinout:\u003c\/strong\u003e\u003cbr\u003eRTC:\u003cbr\u003eD1 - SCL\u003cbr\u003eD2 - SDA\u003cbr\u003eCD card:\u003cbr\u003eD5 - CLK\u003cbr\u003eD6 - DO\u003cbr\u003eD7 - DI\u003cbr\u003eD8 - CS\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x Wemos D1 Mini Data Logger Shield"}
Translation missing: en.products.product.regular_price
$3.99
{"id":1900885246010,"title":"Four Channel Relay Shield 5V 4 Channel Relay Shield Module for Arduino","handle":"four-channel-relay-shield-5v-4-channel-relay-shield-module-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eRelay Shield (ie 5V Quad Relay Module) is a small current signal control power equipment commonly used electronic module, enabling high-power single-chip control devices are widely used in SCM system to make smart home project; and can be directly plugged into the Arduino compatible the use of various types of motherboards, eliminating the patch cable troubles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1. Standard Arduino Shield interfaces and shape\u003cbr\u003e2. Can continue to stack other Arduino expansion boards\u003cbr\u003e3. 3 M3 screw positioning holes for easy installation\u003cbr\u003e4. High Drive (5V or 3.3V) normally open contact closure\u003cbr\u003e5. Onboard relay indicator (red)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note:\u003c\/strong\u003e When using the Arduino UNO board connected to it, because UNO USB interface is extremely high, should avoid green terminals are shorted its shell.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRelay:\u003c\/strong\u003e sky- 5V DC relay , model HJR-4102-L-5V, which Relay1 behalf of the 1st relay , the other and so on.\u003cbr\u003e\u003cstrong\u003ePower Interface:\u003c\/strong\u003e 5V DC power interface\u003cbr\u003e\u003cstrong\u003eIndicator:\u003c\/strong\u003e four lights are red when the relay is driven high , the corresponding indicator will light up\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelay Terminals:\u003c\/strong\u003e Terminal high-power , high-current high voltage can be connected to the device . The 1st foot ( i.e. NOx) is a normally open pin , NCx pin is normally closed , COMx is common, i.e., when the relay is not driven , NOx and COMx open between two pins , NCx and COMx connection ; When the relay (x) control signal pin is high drive relays , NOx and COMx connection open between NCx and COMx.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Four channel Relay Shield\u003c\/p\u003e","published_at":"2022-09-19T12:19:16+08:00","created_at":"2018-09-13T11:36:57+08:00","vendor":"diymore","type":"4-Channel Delay Relay","tags":["Arduino","Relay","Shield"],"price":399,"price_min":399,"price_max":399,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18988500484154,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010152","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Four Channel Relay Shield 5V 4 Channel Relay Shield Module for Arduino","public_title":null,"options":["Default Title"],"price":399,"weight":40,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010152_1_720.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_9_750.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_2_611.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_10_756.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_3_685.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_4_519.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_5_368.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_7_594.jpg?v=1588655267","\/\/www.diymore.cc\/cdn\/shop\/products\/010152_8_798.jpg?v=1588655267"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_1_720.jpg?v=1588655267","options":["Title"],"media":[{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678781001799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_1_720.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_1_720.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678781395015,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_9_750.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_9_750.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678781853767,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_2_611.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_2_611.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678782148679,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_10_756.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_10_756.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678783230023,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_3_685.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_3_685.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678783492167,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_4_519.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_4_519.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678783950919,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_5_368.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_5_368.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678784016455,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_7_594.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_7_594.jpg?v=1588655267","width":1000},{"alt":"Four Channel Relay Shield 5V 4 Module For Arduino 4-Channel Delay","id":6678784475207,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_8_798.jpg?v=1588655267"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010152_8_798.jpg?v=1588655267","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eRelay Shield (ie 5V Quad Relay Module) is a small current signal control power equipment commonly used electronic module, enabling high-power single-chip control devices are widely used in SCM system to make smart home project; and can be directly plugged into the Arduino compatible the use of various types of motherboards, eliminating the patch cable troubles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e1. Standard Arduino Shield interfaces and shape\u003cbr\u003e2. Can continue to stack other Arduino expansion boards\u003cbr\u003e3. 3 M3 screw positioning holes for easy installation\u003cbr\u003e4. High Drive (5V or 3.3V) normally open contact closure\u003cbr\u003e5. Onboard relay indicator (red)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecial Note:\u003c\/strong\u003e When using the Arduino UNO board connected to it, because UNO USB interface is extremely high, should avoid green terminals are shorted its shell.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRelay:\u003c\/strong\u003e sky- 5V DC relay , model HJR-4102-L-5V, which Relay1 behalf of the 1st relay , the other and so on.\u003cbr\u003e\u003cstrong\u003ePower Interface:\u003c\/strong\u003e 5V DC power interface\u003cbr\u003e\u003cstrong\u003eIndicator:\u003c\/strong\u003e four lights are red when the relay is driven high , the corresponding indicator will light up\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelay Terminals:\u003c\/strong\u003e Terminal high-power , high-current high voltage can be connected to the device . The 1st foot ( i.e. NOx) is a normally open pin , NCx pin is normally closed , COMx is common, i.e., when the relay is not driven , NOx and COMx open between two pins , NCx and COMx connection ; When the relay (x) control signal pin is high drive relays , NOx and COMx connection open between NCx and COMx.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Four channel Relay Shield\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1870435713082,"title":"Arduino Nano Expansion Board Micro Sensor Shield v3.0 I\/O Uno R3 leonardo","handle":"arduino-nano-expansion-board-micro-sensor-shield-v3-0-i-o-uno-r3-leonardo","description":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a dedicated arduino I \/ O expansion boards designed for leads.\u003cbr\u003eYou can easily use DuPont wire connecting various modules.\u003cbr\u003eCompatible with arduino 2009, NANO, UNO, LEONARDO, MICRO.\u003cbr\u003eWhen you use a power extension board, the maximum current output can reach 5V\/2A. \u003cbr\u003eWe use colored pin, easier wiring area definitions, Red 5V, black GND, yellow I \/ O.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PCS*arduino Nano v3.0 I\/O expansion board micro sensor shield Uno r3 leonardo 2009\u003c\/p\u003e","published_at":"2018-09-01T15:16:11+08:00","created_at":"2018-09-01T15:20:28+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Leonardo R3","Nano","Nano V3.0","Shield","UNO R3"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":299,"compare_at_price_min":299,"compare_at_price_max":299,"compare_at_price_varies":false,"variants":[{"id":18592970309690,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010309","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Nano Expansion Board Micro Sensor Shield v3.0 I\/O Uno R3 leonardo","public_title":null,"options":["Default Title"],"price":599,"weight":25,"compare_at_price":299,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_164.jpg?v=1588655170","\/\/www.diymore.cc\/cdn\/shop\/products\/2_859.jpg?v=1588655170","\/\/www.diymore.cc\/cdn\/shop\/products\/3_840.jpg?v=1588655170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_164.jpg?v=1588655170","options":["Title"],"media":[{"alt":"Arduino Nano Expansion Board Micro Sensor Shield V3.0 I\/o Uno R3 Leonardo Module","id":6678778019911,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_164.jpg?v=1588655170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_164.jpg?v=1588655170","width":1000},{"alt":"Arduino Nano Expansion Board Micro Sensor Shield V3.0 I\/o Uno R3 Leonardo Module","id":6678778118215,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_859.jpg?v=1588655170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_859.jpg?v=1588655170","width":1000},{"alt":"Arduino Nano Expansion Board Micro Sensor Shield V3.0 I\/o Uno R3 Leonardo Module","id":6678778314823,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_840.jpg?v=1588655170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_840.jpg?v=1588655170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a dedicated arduino I \/ O expansion boards designed for leads.\u003cbr\u003eYou can easily use DuPont wire connecting various modules.\u003cbr\u003eCompatible with arduino 2009, NANO, UNO, LEONARDO, MICRO.\u003cbr\u003eWhen you use a power extension board, the maximum current output can reach 5V\/2A. \u003cbr\u003eWe use colored pin, easier wiring area definitions, Red 5V, black GND, yellow I \/ O.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e1PCS*arduino Nano v3.0 I\/O expansion board micro sensor shield Uno r3 leonardo 2009\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1842653855802,"title":"L293D Wifi Motor Drive Shield Module for Arduino NodeMcu Lua ESP8266 ESP-12E","handle":"l293d-wifi-motor-drive-shield-module-for-arduino-nodemcu-lua-esp8266-esp-12e","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower input:\u003c\/li\u003e\n\u003cli\u003eMotor power supply (VM): 4.5V ~ 36V, can be powered separately\u003c\/li\u003e\n\u003cli\u003eControl power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately\u003c\/li\u003e\n\u003cli\u003eModule provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control\u003c\/li\u003e\n\u003cli\u003eLogic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)\u003c\/li\u003e\n\u003cli\u003eDrive part of the work current Io: ≤1.2A\u003c\/li\u003e\n\u003cli\u003eMaximum power dissipation: 4W (T = 90 ℃)\u003c\/li\u003e\n\u003cli\u003eControl signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -25 ℃ ~ + 125 ℃\u003c\/li\u003e\n\u003cli\u003eDrive Type: Dual high-power H-bridge driver\u003c\/li\u003e\n\u003cli\u003eESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)\u003c\/li\u003e\n\u003cli\u003eExpand two-way motor-driven, two-way direct drive motor\u003c\/li\u003e\n\u003cli\u003eOnboard power switch\u003c\/li\u003e\n\u003cli\u003eMotor power, control power separation; In the experiment, by short-circuiting block the merger,\u003c\/li\u003e\n\u003cli\u003ethe VIN and VM short, while power to the motor and the control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e\u003cbr\u003eWhen inserted into the ESP-12E module,\u003cbr\u003eplease note the direction consistent with an expansion board antenna\u003cbr\u003eThe use of short modules that can simultaneously control board and motor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Wifi Motor Drive Shield","published_at":"2018-08-21T17:02:21+08:00","created_at":"2018-08-21T17:04:10+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","ESP8266","Kits","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18087981449274,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040094","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L293D Wifi Motor Drive Shield Module for Arduino NodeMcu Lua ESP8266 ESP-12E","public_title":null,"options":["Default Title"],"price":599,"weight":21,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0065_603.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0066_831.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0068_163.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0069_761.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0070_395.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0071_125.jpg?v=1588653092","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0072_314.jpg?v=1588653092"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0065_603.jpg?v=1588653092","options":["Title"],"media":[{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678708912199,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0065_603.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0065_603.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678708944967,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0066_831.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0066_831.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678710157383,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0068_163.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0068_163.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678710255687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0069_761.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0069_761.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678710714439,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0070_395.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0070_395.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678710812743,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0071_125.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0071_125.jpg?v=1588653092","width":1000},{"alt":"L293D Wifi Motor Drive Shield Module For Arduino Nodemcu Lua Esp8266 Esp-12E Driver","id":6678710845511,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0072_314.jpg?v=1588653092"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0072_314.jpg?v=1588653092","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003ePower input:\u003c\/li\u003e\n\u003cli\u003eMotor power supply (VM): 4.5V ~ 36V, can be powered separately\u003c\/li\u003e\n\u003cli\u003eControl power (VIN): 4.5V ~ 9V (10VMAX), can be powered separately\u003c\/li\u003e\n\u003cli\u003eModule provides short-circuit sub (short the VM and VIN), you can easily use one power (must 4.5V ~ 9V) while completing motor drive and control\u003c\/li\u003e\n\u003cli\u003eLogic Operating current Iss: ≤60mA (Vi = L), ≤22mA (Vi = H)\u003c\/li\u003e\n\u003cli\u003eDrive part of the work current Io: ≤1.2A\u003c\/li\u003e\n\u003cli\u003eMaximum power dissipation: 4W (T = 90 ℃)\u003c\/li\u003e\n\u003cli\u003eControl signal input level: High: 2.3V≤VIH≤VIN; Low: -0.3V≤VIL≤1.5V\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -25 ℃ ~ + 125 ℃\u003c\/li\u003e\n\u003cli\u003eDrive Type: Dual high-power H-bridge driver\u003c\/li\u003e\n\u003cli\u003eESP12E Dev Kit Control Port: D1, D3 (A motor); D2, D4 (B motor)\u003c\/li\u003e\n\u003cli\u003eExpand two-way motor-driven, two-way direct drive motor\u003c\/li\u003e\n\u003cli\u003eOnboard power switch\u003c\/li\u003e\n\u003cli\u003eMotor power, control power separation; In the experiment, by short-circuiting block the merger,\u003c\/li\u003e\n\u003cli\u003ethe VIN and VM short, while power to the motor and the control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNotice:\u003c\/strong\u003e\u003cbr\u003eWhen inserted into the ESP-12E module,\u003cbr\u003eplease note the direction consistent with an expansion board antenna\u003cbr\u003eThe use of short modules that can simultaneously control board and motor.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*L293D Wifi Motor Drive Shield"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1769215721530,"title":"ARM STM8S103F3P6 STM8 Minimum System Development Board Module for Arduino","handle":"arm-stm8s103f3p6-stm8-minimum-system-development-board-module-for-arduino","description":"\u003cstrong\u003eDescriptions:\u003c\/strong\u003e\u003cbr\u003e1. The core board schematics (PDF format) and tested source. Burned into the test program, LED flashes, allowing you to detect the core board is working properly.\u003cbr\u003e2. Provide at IAR and STVD two development environments register operation and routine operation of the library functions. Timer routine, UART transmit routine, UART receive routines, clock switching routines, AD routines and so on.\u003cbr\u003e3.STM8 Applications.\u003cbr\u003e4.STM8 package library.\u003cbr\u003e5.IAR development environment, STVP programming software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSTM8S103F3P6 performance comparison:\u003c\/strong\u003e\u003cbr\u003e• STM8S003F3 chips only 128 bytes of EEPROM, STM8S103F3 640 bytes;\u003cbr\u003e• STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase ten thousand times;\u003cbr\u003e• STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* TM8S103F3P6 STM8 Minimum System Development Board","published_at":"2018-07-27T17:07:49+08:00","created_at":"2018-07-27T17:09:23+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16871891075130,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"020009","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ARM STM8S103F3P6 STM8 Minimum System Development Board Module for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_809.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_10_628.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_1_726.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_6_135.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_2_123.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_3_977.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_9_394.jpg?v=1588647933","\/\/www.diymore.cc\/cdn\/shop\/products\/020009_7_936.jpg?v=1588647933"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_809.jpg?v=1588647933","options":["Title"],"media":[{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503424071,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_809.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_809.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503489607,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_10_628.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_10_628.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503522375,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_1_726.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_1_726.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503555143,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_6_135.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_6_135.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503587911,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_2_123.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_2_123.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503620679,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_3_977.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_3_977.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503686215,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_9_394.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_9_394.jpg?v=1588647933","width":1000},{"alt":"Arm Stm8S103F3P6 Stm8 Minimum System Development Board Module For Arduino Expansion Shield","id":6678503784519,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_7_936.jpg?v=1588647933"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020009_7_936.jpg?v=1588647933","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescriptions:\u003c\/strong\u003e\u003cbr\u003e1. The core board schematics (PDF format) and tested source. Burned into the test program, LED flashes, allowing you to detect the core board is working properly.\u003cbr\u003e2. Provide at IAR and STVD two development environments register operation and routine operation of the library functions. Timer routine, UART transmit routine, UART receive routines, clock switching routines, AD routines and so on.\u003cbr\u003e3.STM8 Applications.\u003cbr\u003e4.STM8 package library.\u003cbr\u003e5.IAR development environment, STVP programming software.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSTM8S103F3P6 performance comparison:\u003c\/strong\u003e\u003cbr\u003e• STM8S003F3 chips only 128 bytes of EEPROM, STM8S103F3 640 bytes;\u003cbr\u003e• STM8S003F3 chip FLASH erase only 100 times, STM8S103F3 can erase ten thousand times;\u003cbr\u003e• STM8S103F2 chip FLASH only 4K bytes, STM8S103F3 have 8K bytes.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* TM8S103F3P6 STM8 Minimum System Development Board"}
Translation missing: en.products.product.regular_price
$5.99
{"id":1767842381882,"title":"OLED Shield WeMos D1 Mini 0.66\" inch 64X48 IIC I2C for Arduino","handle":"oled-shield-wemos-d1-mini-0-66-inch-64x48-iic-i2c-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eIt is an OLED display for use with the Wemos D1 Mini IOT Device! Use with your Wemos D1 Mini. To provide a bright crisp user interface for your product.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eScreen Size: 64x48 pixels (0.66” Across)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eDriver IC: SSD1306\u003c\/li\u003e\n\u003cli\u003eInterface: IIC(I2C)\u003c\/li\u003e\n\u003cli\u003eIIC Address: 0x3C or 0x3D\u003c\/li\u003e\n\u003cli\u003eWarning: all I\/O are designed to be 3.3V compliant only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e2 x Long female pins\u003cbr\u003e2 x Short female pins\u003cbr\u003e2 x Normal pins\u003cbr\u003e1 x OLED Shied","published_at":"2018-07-27T11:00:39+08:00","created_at":"2018-07-27T11:04:08+08:00","vendor":"diymore","type":"Motor Driver Module","tags":["Arduino","Display","OLED","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16846415364154,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040181","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"OLED Shield WeMos D1 Mini 0.66\" inch 64X48 IIC I2C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040181_8_961.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_9_129.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_1_199.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_2_598.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_5_538.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_6_683.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_7_841.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_13_449.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_10_295.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_14_739.jpg?v=1588647904","\/\/www.diymore.cc\/cdn\/shop\/products\/040181_12_273.jpg?v=1588647904"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_8_961.jpg?v=1588647904","options":["Title"],"media":[{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502309959,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_8_961.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_8_961.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502375495,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_9_129.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_9_129.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502441031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_1_199.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_1_199.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502539335,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_2_598.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_2_598.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502572103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_5_538.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_5_538.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502604871,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_6_683.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_6_683.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678502834247,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_7_841.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_7_841.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678503096391,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_13_449.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_13_449.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678503161927,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_10_295.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_10_295.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678503194695,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_14_739.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_14_739.jpg?v=1588647904","width":1000},{"alt":"Oled Shield Wemos D1 Mini 0.66 Inch 64X48 Iic I2C For Arduino Motor Driver Module","id":6678503292999,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_12_273.jpg?v=1588647904"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040181_12_273.jpg?v=1588647904","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eIt is an OLED display for use with the Wemos D1 Mini IOT Device! Use with your Wemos D1 Mini. To provide a bright crisp user interface for your product.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eParameters:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eScreen Size: 64x48 pixels (0.66” Across)\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 3.3V\u003c\/li\u003e\n\u003cli\u003eDriver IC: SSD1306\u003c\/li\u003e\n\u003cli\u003eInterface: IIC(I2C)\u003c\/li\u003e\n\u003cli\u003eIIC Address: 0x3C or 0x3D\u003c\/li\u003e\n\u003cli\u003eWarning: all I\/O are designed to be 3.3V compliant only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e2 x Long female pins\u003cbr\u003e2 x Short female pins\u003cbr\u003e2 x Normal pins\u003cbr\u003e1 x OLED Shied"}
13% OFF
Translation missing: en.products.product.regular_price
$15.99
$13.99
On Sale
{"id":1671637434426,"title":"L298P Shield Expansion Board DC Motor Driver Module 2A H-Bridge 2 way For Arduino UNO R3 Mega2560","handle":"diymore-l298p-shield-expansion-board-dc-motor-driver-module-2a-h-bridge-2-way-for-arduino-uno-r3-mega2560","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt lets you drive two DC motors with your board, controlling the speed and direction of each one independently\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eYou can also measure the motor current absorption of each motor, among other features\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMotor controller L298P, Drives 2 DC motors or 1 stepper motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMax current 2A per channel or 4A max (with external power supply)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eThe Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt lets you drive two DC motors with your board, controlling the speed and direction of each one independently. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou can also measure the motor current absorption of each motor, among other features. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating Voltage 5V to 12V \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMotor controller L298P, Drives 2 DC motors or 1 stepper motor \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMax current 2A per channel or 4A max (with external power supply) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCurrent sensing 1.65V\/A \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFree running stop and brake function\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-09T19:04:15+08:00","created_at":"2018-07-09T19:09:14+08:00","vendor":"diymore","type":"Drive expansion board","tags":["Arduino","MEGA2560","Relay","Shield","UNO R3"],"price":1399,"price_min":1399,"price_max":1399,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":15369368567866,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010396","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"L298P Shield Expansion Board DC Motor Driver Module 2A H-Bridge 2 way For Arduino UNO R3 Mega2560","public_title":null,"options":["Default Title"],"price":1399,"weight":31,"compare_at_price":1599,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010396_3_708.jpg?v=1588642852","\/\/www.diymore.cc\/cdn\/shop\/products\/010396_785.jpg?v=1588642852","\/\/www.diymore.cc\/cdn\/shop\/products\/010396_2_709.jpg?v=1588642852","\/\/www.diymore.cc\/cdn\/shop\/products\/010396_6_908.jpg?v=1588642852","\/\/www.diymore.cc\/cdn\/shop\/products\/010396_7_722.jpg?v=1588642852","\/\/www.diymore.cc\/cdn\/shop\/products\/0103965_358.jpg?v=1588642852"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_3_708.jpg?v=1588642852","options":["Title"],"media":[{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678277062727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_3_708.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_3_708.jpg?v=1588642852","width":1000},{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678277554247,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_785.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_785.jpg?v=1588642852","width":1000},{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678278242375,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_2_709.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_2_709.jpg?v=1588642852","width":1000},{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678279192647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_6_908.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_6_908.jpg?v=1588642852","width":1000},{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678279585863,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_7_722.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010396_7_722.jpg?v=1588642852","width":1000},{"alt":"L298P Shield Expansion Board Dc Motor Driver Module 2A H-Bridge 2 Way For Arduino Uno R3 Mega2560","id":6678280208455,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0103965_358.jpg?v=1588642852"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0103965_358.jpg?v=1588642852","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt lets you drive two DC motors with your board, controlling the speed and direction of each one independently\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eYou can also measure the motor current absorption of each motor, among other features\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMotor controller L298P, Drives 2 DC motors or 1 stepper motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMax current 2A per channel or 4A max (with external power supply)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eThe Motor Shield is based on the L298 , which is a dual full-bridge driver designed to drive inductive loads such as relays, solenoids, DC and stepping motors. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIt lets you drive two DC motors with your board, controlling the speed and direction of each one independently. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eYou can also measure the motor current absorption of each motor, among other features. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating Voltage 5V to 12V \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMotor controller L298P, Drives 2 DC motors or 1 stepper motor \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMax current 2A per channel or 4A max (with external power supply) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCurrent sensing 1.65V\/A \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFree running stop and brake function\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1653996290106,"title":"1PCS Nano I\/O V3.0 ATmega328 5V 16M Micro-Controller Board Arduino I\/O Expansion Shield","handle":"diymore-nano-i-o-expansion-sensor-shield-module-for-arduino-ch340g-uno-r3-nano-v3-0","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eArduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIn essence, it expands the Arduino Nano controller to link those devices in a simple and trouble free manner\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e8 analog Pin with power output and GND\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eArduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Arduino Nano controller to link those devices in a simple and trouble free manner. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eIt is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis expansion shield provides: \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e14 I\/O Pin (servo type with GND, power and signal) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e8 analog Pin with power output and GND \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e6 PWM Pin \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 Servo power input \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e5 I2C expansion Pin \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAREF output \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3.3V output \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x Nano I \/ O Expansion sensor Shield For Arduino UNO \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003caudio controls=\"controls\" style=\"display: none;\"\u003e\u003c\/audio\u003e","published_at":"2018-07-07T18:19:19+08:00","created_at":"2018-07-07T18:24:34+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Nano","Nano V3.0","Sale Products","Shield","UNO R3"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":250,"compare_at_price_min":250,"compare_at_price_max":250,"compare_at_price_varies":false,"variants":[{"id":15127105044538,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010093","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1PCS Nano I\/O V3.0 ATmega328 5V 16M Micro-Controller Board Arduino I\/O Expansion Shield","public_title":null,"options":["Default Title"],"price":499,"weight":115,"compare_at_price":250,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0003_418.jpg?v=1588642701","\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0013_802.jpg?v=1588642701","\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0016_737.jpg?v=1588642701","\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0018_565.jpg?v=1588642701","\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0024_397.jpg?v=1588642701"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0003_418.jpg?v=1588642701","options":["Title"],"media":[{"alt":"Nano I\/o Expansion Sensor Shield Module For Arduino Ch340G Uno R3 Nano V3.0","id":6678265757767,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0003_418.jpg?v=1588642701"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0003_418.jpg?v=1588642701","width":1000},{"alt":"Nano I\/o Expansion Sensor Shield Module For Arduino Ch340G Uno R3 Nano V3.0","id":6678266282055,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0013_802.jpg?v=1588642701"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0013_802.jpg?v=1588642701","width":1000},{"alt":"Nano I\/o Expansion Sensor Shield Module For Arduino Ch340G Uno R3 Nano V3.0","id":6678266609735,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0016_737.jpg?v=1588642701"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0016_737.jpg?v=1588642701","width":1000},{"alt":"Nano I\/o Expansion Sensor Shield Module For Arduino Ch340G Uno R3 Nano V3.0","id":6678266904647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0018_565.jpg?v=1588642701"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0018_565.jpg?v=1588642701","width":1000},{"alt":"Nano I\/o Expansion Sensor Shield Module For Arduino Ch340G Uno R3 Nano V3.0","id":6678267297863,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0024_397.jpg?v=1588642701"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/0DSC_0024_397.jpg?v=1588642701","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eArduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIn essence, it expands the Arduino Nano controller to link those devices in a simple and trouble free manner\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003e8 analog Pin with power output and GND\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eArduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between Arduino Nano and many other devices. In essence, it expands the Arduino Nano controller to link those devices in a simple and trouble free manner. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cspan\u003eIt is a perfect companion of Nano breadboard and compatible with both Arduino Nano v2.x and v3.x. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis expansion shield provides: \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e14 I\/O Pin (servo type with GND, power and signal) \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e8 analog Pin with power output and GND \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e6 PWM Pin \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 Servo power input \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e5 I2C expansion Pin \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAREF output \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e3.3V output \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included: \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1 x Nano I \/ O Expansion sensor Shield For Arduino UNO \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003caudio controls=\"controls\" style=\"display: none;\"\u003e\u003c\/audio\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":4294034260039,"title":"ATtiny85 Digispark Kickstarter Micro USB Microcontroller Development Board Shield Module For Arduino IDE 500mA 5V Regulator I2C","handle":"attiny85-digispark-kickstarter-micro-usb-microcontroller-development-board-shield-module-for-arduino-ide-500ma-5v-regulator-i2c","description":"\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eThe Digispark is an Attiny85 based microcontroller development board similar to the for arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an for arduino is too big or too much.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eThe Digispark is shipped fully assembled except for the two included and easy to solder headers.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eHere are the specs:\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eSupport for the for arduino IDE 1.0+ (OSX\/Win\/Linux)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePower via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eOn-board 500ma 5V Regulator\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eBuilt-in USB\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e6 I\/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e8k Flash Memory (about 6k after bootloader)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eI2C and SPI (vis USI)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePWM on 3 pins (more possible with Software PWM)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eADC on 4 pins\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePower LED and Test\/Status LED\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eSize:2x1.7cm(approx)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;color:#FF0000;\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cp\u003e\n\t\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e1 x Digispark Kickstarter USB Development Board for Arduino\u003c\/span\u003e\n\t\u003c\/p\u003e\n\u003c\/div\u003e","published_at":"2019-10-21T20:17:00+08:00","created_at":"2019-10-21T20:17:03+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931825426503,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010575","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ATtiny85 Digispark Kickstarter Micro USB Microcontroller Development Board Shield Module For Arduino IDE 500mA 5V Regulator I2C","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010575_4_126.jpg?v=1588666216","\/\/www.diymore.cc\/cdn\/shop\/products\/010575_6_103.jpg?v=1588666216","\/\/www.diymore.cc\/cdn\/shop\/products\/010575_5_683.jpg?v=1588666216","\/\/www.diymore.cc\/cdn\/shop\/products\/010575_1_371.jpg?v=1588666216","\/\/www.diymore.cc\/cdn\/shop\/products\/010575_3_756.jpg?v=1588666216","\/\/www.diymore.cc\/cdn\/shop\/products\/010575_10_555.jpg?v=1588666216"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_4_126.jpg?v=1588666216","options":["Title"],"media":[{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679645978695,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_4_126.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_4_126.jpg?v=1588666216","width":1000},{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679646175303,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_6_103.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_6_103.jpg?v=1588666216","width":1000},{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679646732359,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_5_683.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_5_683.jpg?v=1588666216","width":1000},{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679646896199,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_1_371.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_1_371.jpg?v=1588666216","width":1000},{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679647322183,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_3_756.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_3_756.jpg?v=1588666216","width":1000},{"alt":"Attiny85 Digispark Kickstarter Micro Usb Microcontroller Development Board Shield Module For Arduino","id":6679647682631,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_10_555.jpg?v=1588666216"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010575_10_555.jpg?v=1588666216","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eThe Digispark is an Attiny85 based microcontroller development board similar to the for arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar for arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an for arduino is too big or too much.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eThe Digispark is shipped fully assembled except for the two included and easy to solder headers.\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eHere are the specs:\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eSupport for the for arduino IDE 1.0+ (OSX\/Win\/Linux)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePower via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eOn-board 500ma 5V Regulator\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eBuilt-in USB\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e6 I\/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e8k Flash Memory (about 6k after bootloader)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eI2C and SPI (vis USI)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePWM on 3 pins (more possible with Software PWM)\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eADC on 4 pins\u003c\/span\u003e\u003cbr\u003e\n\u003cspan style=\"font-size:16px;font-family:arial;\"\u003ePower LED and Test\/Status LED\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003eSize:2x1.7cm(approx)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:16px;font-family:arial;color:#FF0000;\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cp\u003e\n\t\t\u003cspan style=\"font-size:16px;font-family:arial;\"\u003e1 x Digispark Kickstarter USB Development Board for Arduino\u003c\/span\u003e\n\t\u003c\/p\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":2523755610170,"title":"PCF8574 I2C-Bus Evaluation Development Module IO Expansion Board I\/O Expander","handle":"pcf8574-i2c-bus-evaluation-development-module-io-expansion-board-i-o-expander","description":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eI2C interface, I \/ O expansion module, two I \/ O scalability 8 I \/ O (up to 8 simultaneous use the PCF8574 expanded to 64 I \/ O)\u003cbr\u003eMost important feature: 1. Supports two interface types access target board: Pin or row seat,\u003cbr\u003eSupport I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules)\u003cbr\u003eTypical application: I \/ O resource shortage MCU I \/ O expansion\u003cbr\u003eMain resources: the PCF8574 I2C interface, 8-bit parallel\u003cbr\u003eInformation includes:\u003cbr\u003eTest procedures (AVR, STM8, C8051F)\u003cbr\u003eCircuit schematics\u003cbr\u003eRelated PDF data\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x PCF8574 IO Expansion Board I\/O Expander I2C-Bus Evaluation Development Module\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cbr\u003e\u003cspan data-v-2868eb04=\"\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\u003cspan data-v-2868eb04=\"\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\" class=\"content-3WfBL_0\"\u003e\n\u003cdiv data-v-2868eb04=\"\" class=\"outputBox-qe9A4_0\"\u003e\n\u003cdiv data-v-2868eb04=\"\" class=\"outputBox-3oESn_0\"\u003e\u003cspan data-v-2868eb04=\"\" class=\"outputBox-13Ovx_0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-09-29T18:13:32+08:00","created_at":"2019-09-29T18:16:59+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23750136234042,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010387","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PCF8574 I2C-Bus Evaluation Development Module IO Expansion Board I\/O Expander","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010387_705.jpg?v=1588665284","\/\/www.diymore.cc\/cdn\/shop\/products\/PCF8574-IO-Expansion-Board-1__1_149.jpg?v=1588665284","\/\/www.diymore.cc\/cdn\/shop\/products\/01038703_196.jpg?v=1588665284","\/\/www.diymore.cc\/cdn\/shop\/products\/01038704_680.jpg?v=1588665284","\/\/www.diymore.cc\/cdn\/shop\/products\/01038701_809.jpg?v=1588665284","\/\/www.diymore.cc\/cdn\/shop\/products\/01038702_467.jpg?v=1588665284"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010387_705.jpg?v=1588665284","options":["Title"],"media":[{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679535910983,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010387_705.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010387_705.jpg?v=1588665284","width":1000},{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679536369735,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/PCF8574-IO-Expansion-Board-1__1_149.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/PCF8574-IO-Expansion-Board-1__1_149.jpg?v=1588665284","width":1000},{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679536697415,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038703_196.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038703_196.jpg?v=1588665284","width":1000},{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679537025095,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038704_680.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038704_680.jpg?v=1588665284","width":1000},{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679537483847,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038701_809.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038701_809.jpg?v=1588665284","width":1000},{"alt":"Pcf8574 I2C-Bus Evaluation Development Module Io Expansion Board I\/o Expander Shield","id":6679538106439,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038702_467.jpg?v=1588665284"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/01038702_467.jpg?v=1588665284","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan lang=\"en\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eI2C interface, I \/ O expansion module, two I \/ O scalability 8 I \/ O (up to 8 simultaneous use the PCF8574 expanded to 64 I \/ O)\u003cbr\u003eMost important feature: 1. Supports two interface types access target board: Pin or row seat,\u003cbr\u003eSupport I2C bus cascade (by pin header row seat docking methods can be used simultaneously multiple I2C modules)\u003cbr\u003eTypical application: I \/ O resource shortage MCU I \/ O expansion\u003cbr\u003eMain resources: the PCF8574 I2C interface, 8-bit parallel\u003cbr\u003eInformation includes:\u003cbr\u003eTest procedures (AVR, STM8, C8051F)\u003cbr\u003eCircuit schematics\u003cbr\u003eRelated PDF data\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x PCF8574 IO Expansion Board I\/O Expander I2C-Bus Evaluation Development Module\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cbr\u003e\u003cspan data-v-2868eb04=\"\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\n\u003cdiv data-v-2868eb04=\"\"\u003e\u003cspan data-v-2868eb04=\"\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"translate-man-app\" class=\"content-3WfBL_0\"\u003e\n\u003cdiv data-v-2868eb04=\"\" class=\"outputBox-qe9A4_0\"\u003e\n\u003cdiv data-v-2868eb04=\"\" class=\"outputBox-3oESn_0\"\u003e\u003cspan data-v-2868eb04=\"\" class=\"outputBox-13Ovx_0\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price
$6.99
{"id":2517131755578,"title":"For Raspberry PI 2 3 B B+ With Screws GPIO Adapter Plate Expansion Board Raspberry Pi Shield Multifunctional Module","handle":"for-raspberry-pi-2-3-b-b-with-screws-gpio-adapter-plate-expansion-board-raspberry-pi-shield-multifunctional-module","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003eGPIO Expansion Board For Raspberry Pi Shield for Raspberry PI 2 3 B B+ With Screws\u003cbr\u003e \u003cbr\u003e Type: Multifunction GPIO Extension Board Dedicated Board\u003cbr\u003e \u003cbr\u003e Adaptable Models : For Raspberry Pi 3B 2B+\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cstrong\u003ePackage Include:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e 1 Pcs Multifunction GPIO Extension Board\u003cbr\u003e \u003cbr\u003e 1 Set of Screws\u003cbr\u003e \u003cbr\u003e 1 Set of Jumpers Headers\u003c\/span\u003e\u003c\/span\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e \u003c\/p\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cimg alt=\"011752 1_\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1Z9lUQmzqK1RjSZFHq6z3CpXa4.jpg\"\u003e \r\n \u003cimg alt=\"011752 1_ 1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1sGd0QbrpK1RjSZTEq6AWAVXaU.jpg\"\u003e \r\n \u003cimg alt=\"011752 1_ 2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1Q4pVQkvoK1RjSZPfq6xPKFXab.jpg\"\u003e \r\n \u003cimg alt=\"011752 2_\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1VUtZQgHqK1RjSZFEq6AGMXXa0.jpg\"\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e","published_at":"2019-09-17T21:10:15+08:00","created_at":"2019-09-17T21:10:17+08:00","vendor":"diymore","type":"Raspberry Pi","tags":["Raspberry Pi","Shield"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727148859450,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011752","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"For Raspberry PI 2 3 B B+ With Screws GPIO Adapter Plate Expansion Board Raspberry Pi Shield Multifunctional Module","public_title":null,"options":["Default Title"],"price":699,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1NmRTQbvpK1RjSZPiq6zmwXXaD_320.jpg?v=1588663242"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1NmRTQbvpK1RjSZPiq6zmwXXaD_320.jpg?v=1588663242","options":["Title"],"media":[{"alt":"For Raspberry Pi 2 3 B B+ With Screws Gpio Adapter Plate Expansion Board Pi Shield Multifunctional","id":6679291658311,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1NmRTQbvpK1RjSZPiq6zmwXXaD_320.jpg?v=1588663242"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1NmRTQbvpK1RjSZPiq6zmwXXaD_320.jpg?v=1588663242","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003eGPIO Expansion Board For Raspberry Pi Shield for Raspberry PI 2 3 B B+ With Screws\u003cbr\u003e \u003cbr\u003e Type: Multifunction GPIO Extension Board Dedicated Board\u003cbr\u003e \u003cbr\u003e Adaptable Models : For Raspberry Pi 3B 2B+\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cstrong\u003ePackage Include:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e 1 Pcs Multifunction GPIO Extension Board\u003cbr\u003e \u003cbr\u003e 1 Set of Screws\u003cbr\u003e \u003cbr\u003e 1 Set of Jumpers Headers\u003c\/span\u003e\u003c\/span\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cp\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e \u003c\/p\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e \r\n \u003cimg alt=\"011752 1_\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1Z9lUQmzqK1RjSZFHq6z3CpXa4.jpg\"\u003e \r\n \u003cimg alt=\"011752 1_ 1\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1sGd0QbrpK1RjSZTEq6AWAVXaU.jpg\"\u003e \r\n \u003cimg alt=\"011752 1_ 2\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1Q4pVQkvoK1RjSZPfq6xPKFXab.jpg\"\u003e \r\n \u003cimg alt=\"011752 2_\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1VUtZQgHqK1RjSZFEq6AGMXXa0.jpg\"\u003e \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e \r\n\u003cdiv\u003e\r\n \r\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":2517125595194,"title":"Mini Data Logger Module Logging Shield for Arduino Raspberry Pi Logging Recorder Data Logger Module Shield V1.0 SD Card","handle":"mini-data-logger-module-logging-shield-for-arduino-raspberry-pi-logging-recorder-data-logger-module-shield-v1-0-sd-card","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\r\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;color:#ff0000;\"\u003eNote: the item is without the battery !\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e \u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e\u003cstrong style=\"font-weight:700;\"\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003ewe've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to assemble and customize, it also comes with great documentation and libraries.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eYou can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. We even have a tutorial on how to use two free software programs to plot your data\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eThe included Real Time Clock timestamps all your data with the current time, so that you know precisely what happened when!\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eReal time clock (RTC) keeps the time going even when the for arduino is unplugged. The battery backup lasts for years\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003ePrototyping area for soldering connectors, circuitry or sensors.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e\u003cstrong style=\"font-family:verdana;font-weight:700;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;background:white;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;background:white;\"\u003e 1 X\u003c\/span\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eMini Data Logger Module Logging Shield for arduino\/Raspberry Pi\u003c\/span\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H752b993b53eb4db5a308d7dd75b2cd6bL.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H6e509a70a3404f9f9e9446b275c19160k.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H18babf7bb1ee4f1481bea946f99efff0j.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H075ff6cff30d4e54a2d55abc497d442dL.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/Hfe35c4f4b92e4c6392645fac8f9ddf5f2.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/Hede505f74c8a4c26a97435d8fcaf95bfN.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e\r\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e","published_at":"2019-09-17T21:04:46+08:00","created_at":"2019-09-17T21:04:48+08:00","vendor":"diymore","type":"Raspberry Pi","tags":["Arduino","Raspberry Pi","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727139094586,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011644","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Mini Data Logger Module Logging Shield for Arduino Raspberry Pi Logging Recorder Data Logger Module Shield V1.0 SD Card","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/Ha485df0a98a34690b1c7d5cfd0264aa5Z_851.jpg?v=1588662691"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/Ha485df0a98a34690b1c7d5cfd0264aa5Z_851.jpg?v=1588662691","options":["Title"],"media":[{"alt":"Mini Data Logger Module Logging Shield For Arduino Raspberry Pi Recorder V1.0 Sd Card","id":6679224549447,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/Ha485df0a98a34690b1c7d5cfd0264aa5Z_851.jpg?v=1588662691"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/Ha485df0a98a34690b1c7d5cfd0264aa5Z_851.jpg?v=1588662691","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\r\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;color:#ff0000;\"\u003eNote: the item is without the battery !\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e \u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e\u003cstrong style=\"font-weight:700;\"\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;background-color:#ffffff;\"\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003ewe've had a lot of people looking for a dedicated and well-designed data logging shield. We worked hard to engineer an inexpensive but well-rounded design. Not only is it easy to assemble and customize, it also comes with great documentation and libraries.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eYou can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program. We even have a tutorial on how to use two free software programs to plot your data\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eThe included Real Time Clock timestamps all your data with the current time, so that you know precisely what happened when!\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eReal time clock (RTC) keeps the time going even when the for arduino is unplugged. The battery backup lasts for years\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003ePrototyping area for soldering connectors, circuitry or sensors.\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e\u003cstrong style=\"font-family:verdana;font-weight:700;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;background:white;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp style=\"word-wrap:break-word;background:white;color:#333333;margin:0px 0px 15px;\"\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;background:white;\"\u003e 1 X\u003c\/span\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size:20px;font-family:tahoma;\"\u003eMini Data Logger Module Logging Shield for arduino\/Raspberry Pi\u003c\/span\u003e \u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H752b993b53eb4db5a308d7dd75b2cd6bL.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H6e509a70a3404f9f9e9446b275c19160k.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H18babf7bb1ee4f1481bea946f99efff0j.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H075ff6cff30d4e54a2d55abc497d442dL.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/Hfe35c4f4b92e4c6392645fac8f9ddf5f2.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/Hede505f74c8a4c26a97435d8fcaf95bfN.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e\r\n\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$6.99
{"id":2517124120634,"title":"Multi Function Shield with Buzzer LM35 4 Digit Digital LED Expansion Board Module for Arduino UNO R3 Lenardo Mega2560 Diy Kit","handle":"multi-function-shield-with-buzzer-lm35-4-digit-digital-led-expansion-board-module-for-arduino-uno-r3-lenardo-mega2560-diy-kit","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: trebuchet ms , helvetica , sans-serif;\"\u003eMulti Function Shield with Buzzer LM35 4LED Expansion Board Module for Arduino UNO R3 Lenardo Mega2560\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: trebuchet ms , helvetica , sans-serif;\"\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"color: #0070c0;\"\u003eFeatures\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e This is an open-source code base and Simple i\/o platform,and with the use of a similar java, C language development environment. So you can quickly use the language with Flash or Processing ... and other software to make interactive works . Can be used to complete the development of electronic components such as Switch or Sensors or other controllers , LED, stepper motor or other output device . You can also operate independently as a software platform that can communicate with , for example , said : flash processing Max \/ MSP VVVV or other interactive software ... to develop an open-source IDE interface is based on the principle that allows you to download free of charge to develop more surprising interactive work .\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e 2009 UNO LENARDO 2560 controller seamlessly mainstream\u003cbr\u003e \u003cbr\u003e 4-way LED indicator ( LED indicator to know the importance , in the actual doing projects , with this indicator can be used directly working status LED indicates the procedure to facilitate debugging.\u003cbr\u003e \u003cbr\u003e DS18B20 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include the DS18B20 Oh, needed another shot .\u003cbr\u003e \u003cbr\u003e LM35 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include LM35 Oh, needed another shot .\u003cbr\u003e \u003cbr\u003e 3296 precision adjustable potentiometer, analog input port ( can be used for controlling LED brightness, turn the steering angle , the digital voltage, etc. )\u003cbr\u003e \u003cbr\u003e integrated infrared receiver that can fit any infrared remote control experiments , the price also does not include the integrated receiver and needed another shot .\u003cbr\u003e \u003cbr\u003e four digital tube ( using 74HC595 driver provincial IO learning SPI), you can do digital display experiment ( can display temperature , voltage, counter value , etc. ) .\u003cbr\u003e \u003cbr\u003e three separate buttons, a reset button , the button can do experiments ( HMI ) .\u003cbr\u003e \u003cbr\u003e the buzzer sound can be used for experiments . ( Can call the police , pronunciation , etc. )\u003cbr\u003e \u003cbr\u003e Bluetooth, wireless interfaces, voice module , voice recognition module can be used for wireless communication experiment\u003cbr\u003e \u003cbr\u003e servo interface, easy to drive servos\u003cbr\u003e \u003cbr\u003e infrared detection interface, easy and infrared docking realization of human traffic statistics , etc.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cspan style=\"color: #0070c0;\"\u003e\u003cspan style=\"font-size: 18.0px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e 1 x Multi-Function Shield For Arduino UNO LENARDO MAGE2560 Mega TOP\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg alt=\"DSC_0094\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1NkCBaOLxK1Rjy0Ffq6zYdVXaS.jpg\"\u003e\u003cimg alt=\"DSC_0095\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB19rOzaIvrK1Rjy0Feq6ATmVXax.jpg\"\u003e\u003cimg alt=\"DSC_0096\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1oB9BaOzxK1RkSnaVq6xn9VXar.jpg\"\u003e\u003cimg alt=\"DSC_0097\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1ODqAaOnrK1RjSsziq6xptpXaO.jpg\"\u003e\u003cimg alt=\"DSC_0098\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17ySEaTHuK1RkSndVq6xVwpXa9.jpg\"\u003e\u003cimg alt=\"DSC_0099\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1KarbCwDqK1RjSZSyq6yxEVXaX.jpg\"\u003e\u003c\/p\u003e","published_at":"2019-09-17T21:03:30+08:00","created_at":"2019-09-17T21:03:31+08:00","vendor":"diymore","type":"Drive expansion board","tags":["Arduino","Display","Kits","MEGA2560","Shield","UNO R3","Wireless"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23727137488954,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010719","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Multi Function Shield with Buzzer LM35 4 Digit Digital LED Expansion Board Module for Arduino UNO R3 Lenardo Mega2560 Diy Kit","public_title":null,"options":["Default Title"],"price":699,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1GZaBaITxK1Rjy0Fgq6yovpXag_887.jpg?v=1588662554"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1GZaBaITxK1Rjy0Fgq6yovpXag_887.jpg?v=1588662554","options":["Title"],"media":[{"alt":"Multi Function Shield With Buzzer Lm35 4 Digit Digital Led Expansion Board Module For Arduino Uno R3","id":6679210852423,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1GZaBaITxK1Rjy0Fgq6yovpXag_887.jpg?v=1588662554"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1GZaBaITxK1Rjy0Fgq6yovpXag_887.jpg?v=1588662554","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: trebuchet ms , helvetica , sans-serif;\"\u003eMulti Function Shield with Buzzer LM35 4LED Expansion Board Module for Arduino UNO R3 Lenardo Mega2560\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: trebuchet ms , helvetica , sans-serif;\"\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"color: #0070c0;\"\u003eFeatures\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e This is an open-source code base and Simple i\/o platform,and with the use of a similar java, C language development environment. So you can quickly use the language with Flash or Processing ... and other software to make interactive works . Can be used to complete the development of electronic components such as Switch or Sensors or other controllers , LED, stepper motor or other output device . You can also operate independently as a software platform that can communicate with , for example , said : flash processing Max \/ MSP VVVV or other interactive software ... to develop an open-source IDE interface is based on the principle that allows you to download free of charge to develop more surprising interactive work .\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e 2009 UNO LENARDO 2560 controller seamlessly mainstream\u003cbr\u003e \u003cbr\u003e 4-way LED indicator ( LED indicator to know the importance , in the actual doing projects , with this indicator can be used directly working status LED indicates the procedure to facilitate debugging.\u003cbr\u003e \u003cbr\u003e DS18B20 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include the DS18B20 Oh, needed another shot .\u003cbr\u003e \u003cbr\u003e LM35 temperature sensor interface that can be done to measure the temperature of the experiment , this price does not include LM35 Oh, needed another shot .\u003cbr\u003e \u003cbr\u003e 3296 precision adjustable potentiometer, analog input port ( can be used for controlling LED brightness, turn the steering angle , the digital voltage, etc. )\u003cbr\u003e \u003cbr\u003e integrated infrared receiver that can fit any infrared remote control experiments , the price also does not include the integrated receiver and needed another shot .\u003cbr\u003e \u003cbr\u003e four digital tube ( using 74HC595 driver provincial IO learning SPI), you can do digital display experiment ( can display temperature , voltage, counter value , etc. ) .\u003cbr\u003e \u003cbr\u003e three separate buttons, a reset button , the button can do experiments ( HMI ) .\u003cbr\u003e \u003cbr\u003e the buzzer sound can be used for experiments . ( Can call the police , pronunciation , etc. )\u003cbr\u003e \u003cbr\u003e Bluetooth, wireless interfaces, voice module , voice recognition module can be used for wireless communication experiment\u003cbr\u003e \u003cbr\u003e servo interface, easy to drive servos\u003cbr\u003e \u003cbr\u003e infrared detection interface, easy and infrared docking realization of human traffic statistics , etc.\u003cbr\u003e \u003cbr\u003e \u003cbr\u003e \u003cspan style=\"color: #0070c0;\"\u003e\u003cspan style=\"font-size: 18.0px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e 1 x Multi-Function Shield For Arduino UNO LENARDO MAGE2560 Mega TOP\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \r\n\u003cp\u003e \u003c\/p\u003e \r\n\u003cp\u003e \u003cimg alt=\"DSC_0094\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1NkCBaOLxK1Rjy0Ffq6zYdVXaS.jpg\"\u003e\u003cimg alt=\"DSC_0095\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB19rOzaIvrK1Rjy0Feq6ATmVXax.jpg\"\u003e\u003cimg alt=\"DSC_0096\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1oB9BaOzxK1RkSnaVq6xn9VXar.jpg\"\u003e\u003cimg alt=\"DSC_0097\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1ODqAaOnrK1RjSsziq6xptpXaO.jpg\"\u003e\u003cimg alt=\"DSC_0098\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB17ySEaTHuK1RkSndVq6xVwpXa9.jpg\"\u003e\u003cimg alt=\"DSC_0099\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1KarbCwDqK1RjSZSyq6yxEVXaX.jpg\"\u003e\u003c\/p\u003e"}
44% OFF
Translation missing: en.products.product.regular_price
$2.16
$1.20
On Sale
{"id":2517114355770,"title":"Prototype PCB for Arduino UNO R3 Shield Board DIY Combo Module 2mm+2.54mm Pitch FR-4 Glass Fiber DIY KID","handle":"prototype-pcb-for-arduino-uno-r3-shield-board-diy-combo-module-2mm-2-54mm-pitch-fr-4-glass-fiber-diy-kid","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cdiv\u003e \r\n \u003cp align=\"left\"\u003e \u003cstrong\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003ePrototype PCB for Arduino UNO R3 Shield Board DIY.\u003cbr\u003e Quantity: a lot of 1 piece.\u003cbr\u003e PCB Dimension: 68.58mm x 53.34mm \/ 2.7\" x 2.1\"\u003cbr\u003e PCB Thickness: 1.6mm\u003cbr\u003e Material: high quality FR-4 glass fiber PCB.\u003cbr\u003e All holes are plated through\u003cbr\u003e Top and bottom side are identical copper layers.\u003cbr\u003e Pads grid (pitch) 2.54mm \/ 0.1\", hole diameter 0.9mm.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePackage Included:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e1 x Prototype PCB for Arduino UNO R3 Shield Board \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003c\/p\u003e \r\n\u003c\/div\u003e \r\n\u003cp\u003e \u003cimg alt=\"DSC_0024\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1cRDkPVzqK1RjSZFCq6zbxVXa3.jpg\"\u003e\u003cimg alt=\"DSC_0021\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1sinrPZfpK1RjSZFOq6y6nFXaj.jpg\"\u003e\u003cimg alt=\"DSC_0022\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB18oPfP3HqK1RjSZFgq6y7JXXaW.jpg\"\u003e\u003cimg alt=\"DSC_0023\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1YJ2FP4naK1RjSZFBq6AW7VXaV.jpg\"\u003e\u003cimg alt=\"DSC_0025\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1V1DiP3HqK1RjSZFPq6AwapXan.jpg\"\u003e\u003cimg alt=\"DSC_0026\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1labdP4TpK1RjSZR0q6zEwXXa4.jpg\"\u003e\u003c\/p\u003e","published_at":"2022-09-19T12:19:20+08:00","created_at":"2019-09-17T20:53:19+08:00","vendor":"diymore","type":"DIY PCB Board","tags":["Arduino","Shield","UNO R3"],"price":120,"price_min":120,"price_max":120,"available":true,"price_varies":false,"compare_at_price":216,"compare_at_price_min":216,"compare_at_price_max":216,"compare_at_price_varies":false,"variants":[{"id":23727123660858,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"020076","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Prototype PCB for Arduino UNO R3 Shield Board DIY Combo Module 2mm+2.54mm Pitch FR-4 Glass Fiber DIY KID","public_title":null,"options":["Default Title"],"price":120,"weight":0,"compare_at_price":216,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1PjftP4YaK1RjSZFnq6y80pXat_934.jpg?v=1588661442"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1PjftP4YaK1RjSZFnq6y80pXat_934.jpg?v=1588661442","options":["Title"],"media":[{"alt":"Prototype Pcb For Arduino Uno R3 Shield Board Diy Combo Module 2Mm+2.54Mm Pitch Fr-4 Glass Fiber Kid","id":6679099801671,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1PjftP4YaK1RjSZFnq6y80pXat_934.jpg?v=1588661442"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1PjftP4YaK1RjSZFnq6y80pXat_934.jpg?v=1588661442","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cdiv\u003e \r\n \u003cp align=\"left\"\u003e \u003cstrong\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003eDescription:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003ePrototype PCB for Arduino UNO R3 Shield Board DIY.\u003cbr\u003e Quantity: a lot of 1 piece.\u003cbr\u003e PCB Dimension: 68.58mm x 53.34mm \/ 2.7\" x 2.1\"\u003cbr\u003e PCB Thickness: 1.6mm\u003cbr\u003e Material: high quality FR-4 glass fiber PCB.\u003cbr\u003e All holes are plated through\u003cbr\u003e Top and bottom side are identical copper layers.\u003cbr\u003e Pads grid (pitch) 2.54mm \/ 0.1\", hole diameter 0.9mm.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003ePackage Included:\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e1 x Prototype PCB for Arduino UNO R3 Shield Board \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e \r\n \u003cp align=\"left\"\u003e \u003c\/p\u003e \r\n\u003c\/div\u003e \r\n\u003cp\u003e \u003cimg alt=\"DSC_0024\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1cRDkPVzqK1RjSZFCq6zbxVXa3.jpg\"\u003e\u003cimg alt=\"DSC_0021\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1sinrPZfpK1RjSZFOq6y6nFXaj.jpg\"\u003e\u003cimg alt=\"DSC_0022\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB18oPfP3HqK1RjSZFgq6y7JXXaW.jpg\"\u003e\u003cimg alt=\"DSC_0023\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1YJ2FP4naK1RjSZFBq6AW7VXaV.jpg\"\u003e\u003cimg alt=\"DSC_0025\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1V1DiP3HqK1RjSZFPq6AwapXan.jpg\"\u003e\u003cimg alt=\"DSC_0026\" src=\"https:\/\/ae01.alicdn.com\/kf\/HTB1labdP4TpK1RjSZR0q6zEwXXa4.jpg\"\u003e\u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":2517024899130,"title":"TFT Mega Touch LCD Shield Expansion Board FR4 8-bit 16-bit Mode Module For Arduino SD Card DIY KIT 3.3V","handle":"tft-mega-touch-lcd-shield-expansion-board-fr4-8-bit-16-bit-mode-module-for-arduino-sd-card-diy-kit-3-3v","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eSupport:TFT 3.2'' 4.3'' 5.0'' 7.0''\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eThis TFT01 for arduino on two additional devices: the an for for arduino control panel;another adapter TFT01 to the for arduino this module TFT01 for arduino Shield. \u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eTFT01 LCD is work in 3.3V voltage, so that can not be used directly on top of for for arduino motherboard, so in order to make the TFT01 LCD compatible use with for arduino board, designed this section TFT Shield, can be directly plugged into for arduino board Using the the TFT01 LCD module. \u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003eThe TFT01 LCD is now support 16-bit mode, will not exist encounter like in 328S, only using a set of SD card interface or touch screen interface for arduino Mega256\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e \u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cspan style=\"font-family:helvetica , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H61d08c8f29804b739cca9f61a804b675Y.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H2c8e95d774cd44de95f262aed21705a9a.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H363f3796963944a7b94b2ed2e48b11b5E.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H6d96c5d8a3214977af6c2d956bc4d57fm.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H209ffc48b7cc46759ea15d068906448fS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H73c625f9f13d4e62b3a3d62b25f93ec5k.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cspan style=\"font-family:helvetica , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e","published_at":"2019-09-17T15:16:18+08:00","created_at":"2019-09-17T15:16:21+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Kits","Shield"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23726668808250,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"030027","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TFT Mega Touch LCD Shield Expansion Board FR4 8-bit 16-bit Mode Module For Arduino SD Card DIY KIT 3.3V","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/H807a256e1d3e46b1b449d857caa61607q_753.jpg?v=1588661397"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/H807a256e1d3e46b1b449d857caa61607q_753.jpg?v=1588661397","options":["Title"],"media":[{"alt":"Tft Mega Touch Lcd Shield Expansion Board Fr4 8-Bit 16-Bit Mode Module For Arduino Sd Card Diy Kit","id":6679093608519,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/H807a256e1d3e46b1b449d857caa61607q_753.jpg?v=1588661397"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/H807a256e1d3e46b1b449d857caa61607q_753.jpg?v=1588661397","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e \r\n\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eSupport:TFT 3.2'' 4.3'' 5.0'' 7.0''\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eThis TFT01 for arduino on two additional devices: the an for for arduino control panel;another adapter TFT01 to the for arduino this module TFT01 for arduino Shield. \u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003eTFT01 LCD is work in 3.3V voltage, so that can not be used directly on top of for for arduino motherboard, so in order to make the TFT01 LCD compatible use with for arduino board, designed this section TFT Shield, can be directly plugged into for arduino board Using the the TFT01 LCD module. \u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003eThe TFT01 LCD is now support 16-bit mode, will not exist encounter like in 328S, only using a set of SD card interface or touch screen interface for arduino Mega256\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cspan style=\"font-size:16px;font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e\u003cspan style=\"font-family:Tahoma;\"\u003e \u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e \u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cspan style=\"font-family:helvetica , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H61d08c8f29804b739cca9f61a804b675Y.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H2c8e95d774cd44de95f262aed21705a9a.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H363f3796963944a7b94b2ed2e48b11b5E.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H6d96c5d8a3214977af6c2d956bc4d57fm.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H209ffc48b7cc46759ea15d068906448fS.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg style=\"width:1000px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/H73c625f9f13d4e62b3a3d62b25f93ec5k.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"font-size:16px;\"\u003e\u003cspan style=\"font-family:helvetica , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:verdana , geneva , sans-serif;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":2517024735290,"title":"1602 LCD Display Board Keypad Shield Blue\/Yellow Backlight For LCD Duemilanove 2 Colour","handle":"1602-lcd-board-keypad-shield-blue-backlight-module-for-arduino-duemilanove-robot-board-16-character-by-2-line-hd44780-interface","description":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e1. This is a basic 16 character by 2 line black-on-green display.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e2. Utilizes the extremely common HD44780 parallel interface chipset.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e3. Interface code is freely available.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e4. Blue Backlight with white words.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e5. uses 4 Bit For Arduino LCD Library.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e6. Size:8cm x 5.9cm - 3.15inch x 2.32inch.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e 1 x 1602 LCD Board Keypad Shield Blue Backligh\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1SW7cNHrpK1RjSZTEq6AWAVXa9.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1OCrAMSzqK1RjSZFHq6z3CpXac.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1KzTBMFzqK1RjSZFoq6zfcXXa4.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1iwHJMMHqK1RjSZFkq6x.WFXak.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2019-09-17T15:16:14+08:00","created_at":"2019-09-17T15:16:15+08:00","vendor":"diymore","type":"LCD Display Module","tags":["Arduino","Display","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23726668316730,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"030006LA","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1602 LCD Display Board Keypad Shield Blue\/Yellow Backlight For LCD Duemilanove 2 Colour","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1gM_9NHvpK1RjSZPiq6zmwXXaI_834.jpg?v=1588661365"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1gM_9NHvpK1RjSZPiq6zmwXXaI_834.jpg?v=1588661365","options":["Title"],"media":[{"alt":"1602 Lcd Board Keypad Shield Blue Backlight Module For Arduino Duemilanove Robot 16 Character By 2","id":6679088627783,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1gM_9NHvpK1RjSZPiq6zmwXXaI_834.jpg?v=1588661365"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/HTB1gM_9NHvpK1RjSZPiq6zmwXXaI_834.jpg?v=1588661365","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cwidget data-widget-type=\"customText\" id=\"33684419\" title=\"Head\" type=\"custom\"\u003e\u003c\/widget\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB12JMgilsmBKNjSZFsq6yXSVXaS.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e1. This is a basic 16 character by 2 line black-on-green display.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e2. Utilizes the extremely common HD44780 parallel interface chipset.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e3. Interface code is freely available.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e4. Blue Backlight with white words.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e5. uses 4 Bit For Arduino LCD Library.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e6. Size:8cm x 5.9cm - 3.15inch x 2.32inch.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 18.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 16.0px;\"\u003e\u003cspan style=\"font-family: verdana , geneva , sans-serif;\"\u003e\u003cspan\u003e 1 x 1602 LCD Board Keypad Shield Blue Backligh\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1VXjubuUXBuNjt_a0q6AysXXaA.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1SW7cNHrpK1RjSZTEq6AWAVXa9.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1OCrAMSzqK1RjSZFHq6z3CpXac.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1KzTBMFzqK1RjSZFoq6zfcXXa4.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000.0px;\" src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1iwHJMMHqK1RjSZFkq6x.WFXak.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"http:\/\/ae01.alicdn.com\/kf\/HTB1Hc.uimcqBKNjSZFgq6x_kXXaq.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cwidget data-widget-type=\"customText\" id=\"24006699\" title=\"Related\" type=\"custom\"\u003e\u003c\/widget\u003e\n\u003cp\u003e \u003c\/p\u003e"}
Translation missing: en.products.product.regular_price
$6.99
{"id":2088028667962,"title":"TF Card Data Logger Recorder Shield Module for Arduino NANO 3.0","handle":"tf-card-data-logger-recorder-shield-module-for-arduino-nano-3-0","description":"\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003ePlease note that the item does not come with an Arduino NANO (you'll need one to use with the shield), or a SD card. It does NOT come with the RTC battery.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eA new Arduino NANO shield，You can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program.\u003cbr\u003eThe included Real Time Clock timestamps all your data with the current time, so that you know precisely what happened when\u003cbr\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003cbr\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years\u003cbr\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly\u003cbr\u003ePrototyping area for soldering connectors, circuitry or sensors\u003cbr\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003cbr\u003eWorks with Arduino NANO or MICRO\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Data Logger Recorder Board","published_at":"2018-10-29T15:40:01+08:00","created_at":"2018-10-29T15:55:06+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","Nano","Shield"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":20916102004794,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"180021","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TF Card Data Logger Recorder Shield Module for Arduino NANO 3.0","public_title":null,"options":["Default Title"],"price":699,"weight":10,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/180021_1_946.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_3_646.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_4_244.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_5_232.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_6_169.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_7_666.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_12_970.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_9_489.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_10_312.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_11_763.jpg?v=1588658647","\/\/www.diymore.cc\/cdn\/shop\/products\/180021_2_487.jpg?v=1588658647"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_1_946.jpg?v=1588658647","options":["Title"],"media":[{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678924165191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_1_946.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_1_946.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678924230727,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_3_646.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_3_646.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678924918855,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_4_244.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_4_244.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678925213767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_5_232.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_5_232.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678925475911,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_6_169.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_6_169.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678925541447,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_7_666.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_7_666.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678925869127,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_12_970.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_12_970.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678926360647,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_9_489.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_9_489.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678926557255,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_10_312.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_10_312.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678926622791,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_11_763.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_11_763.jpg?v=1588658647","width":1000},{"alt":"Tf Card Data Logger Recorder Shield Module For Arduino Nano 3.0 Adapter","id":6678926688327,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_2_487.jpg?v=1588658647"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/180021_2_487.jpg?v=1588658647","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003ePlease note that the item does not come with an Arduino NANO (you'll need one to use with the shield), or a SD card. It does NOT come with the RTC battery.\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eA new Arduino NANO shield，You can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program.\u003cbr\u003eThe included Real Time Clock timestamps all your data with the current time, so that you know precisely what happened when\u003cbr\u003eSD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card\u003cbr\u003eReal time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years\u003cbr\u003eIncluded libraries and example code for both SD and RTC mean you can get going quickly\u003cbr\u003ePrototyping area for soldering connectors, circuitry or sensors\u003cbr\u003eOnboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run\u003cbr\u003eWorks with Arduino NANO or MICRO\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1*Data Logger Recorder Board"}
Translation missing: en.products.product.regular_price
$8.99
{"id":1969761058874,"title":"ENC28J60 Ethernet Network Module Shield V2.0 for Arduino","handle":"enc28j60-ethernet-network-module-shield-v2-0-for-arduino","description":"Wiring Diagram:\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/files\/X20119_15.jpg?v=1538275955\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is our newly designed arduino compatible board, based on Microchip's ENC28J60 chip design Ethernet module,\u003c\/li\u003e\n\u003cli\u003eENC28J60 is a standalone Ethernet controller with SPI interface, compatible with IEEE 802.3, integrated MAC and 10 BASE-T PHY, top speed Up to 10Mb\/s.\u003c\/li\u003e\n\u003cli\u003eIt is compatible with more Arduino motherboards.\u003c\/li\u003e\n\u003cli\u003eThis module we bring out arduinoI\/O, and provide VCC and GND, so you can easily connect your module application with DuPont line. At the same time ，increase the power input interface, as an external power supply,\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures：\u003c\/strong\u003e\u003cbr\u003e1. Arduino UNO R3 version, connection, UNO R3 pin all lead, yellow, black, red pin\u003cbr\u003e2. ENC28J60 main control chip, network module, network port is connected to the network cable, and the device accesses the network.\u003cbr\u003e3.NANO V3.0 Adapter Port: NANO 3.0 motherboard control.\u003cbr\u003e4.Power input: DC 7-12V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* ENC28J60 Ethernet Shield V2.0\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","published_at":"2018-09-30T10:43:30+08:00","created_at":"2018-09-30T10:56:39+08:00","vendor":"diymore","type":"DM Strong Series","tags":["Arduino","Featured Products","Nano","Nano V3.0","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19831142580282,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X20119","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ENC28J60 Ethernet Network Module Shield V2.0 for Arduino","public_title":null,"options":["Default Title"],"price":899,"weight":30,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_670.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_1_680.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_3_674.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_4_720.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_5_759.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_12_152.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_9_278.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_7_870.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_8_968.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_d246e074-b285-42f1-b319-9ae230eee13f_677.jpg?v=1588656831","\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_14_838.jpg?v=1588656831"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_670.jpg?v=1588656831","options":["Title"],"media":[{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678844211271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_670.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_670.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678844375111,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_1_680.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_1_680.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678844538951,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_3_674.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_3_674.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678844702791,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_4_720.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_4_720.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678844997703,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_5_759.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_5_759.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678845063239,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_12_152.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_12_152.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678845325383,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_9_278.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_9_278.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678845751367,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_7_870.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_7_870.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678845784135,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_8_968.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_8_968.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678845980743,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_d246e074-b285-42f1-b319-9ae230eee13f_677.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_13_d246e074-b285-42f1-b319-9ae230eee13f_677.jpg?v=1588656831","width":1000},{"alt":"Enc28J60 Ethernet Network Module Shield V2.0 For Arduino Dm Strong Series","id":6678846111815,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_14_838.jpg?v=1588656831"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X20119_14_838.jpg?v=1588656831","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Wiring Diagram:\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0122\/7558\/0986\/files\/X20119_15.jpg?v=1538275955\" alt=\"\"\u003e\u003cbr\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThis is our newly designed arduino compatible board, based on Microchip's ENC28J60 chip design Ethernet module,\u003c\/li\u003e\n\u003cli\u003eENC28J60 is a standalone Ethernet controller with SPI interface, compatible with IEEE 802.3, integrated MAC and 10 BASE-T PHY, top speed Up to 10Mb\/s.\u003c\/li\u003e\n\u003cli\u003eIt is compatible with more Arduino motherboards.\u003c\/li\u003e\n\u003cli\u003eThis module we bring out arduinoI\/O, and provide VCC and GND, so you can easily connect your module application with DuPont line. At the same time ，increase the power input interface, as an external power supply,\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003eFeatures：\u003c\/strong\u003e\u003cbr\u003e1. Arduino UNO R3 version, connection, UNO R3 pin all lead, yellow, black, red pin\u003cbr\u003e2. ENC28J60 main control chip, network module, network port is connected to the network cable, and the device accesses the network.\u003cbr\u003e3.NANO V3.0 Adapter Port: NANO 3.0 motherboard control.\u003cbr\u003e4.Power input: DC 7-12V\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1* ENC28J60 Ethernet Shield V2.0\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e"}
Translation missing: en.products.product.regular_price
$6.99
{"id":1916006596666,"title":"16 Channel 12-bit PWM Servo Drive Shield Board -I2C PCA9685 for Arduino","handle":"16-channel-12-bit-pwm-servo-drive-shield-board-i2c-pca9685-for-arduino","description":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eYou want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now?\u003cbr\u003eUsing only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e• It's an i2c-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!\u003cbr\u003e• It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)\u003cbr\u003e• 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs\u003cbr\u003e• Adjustable frequency PWM up to about 1.6 KHz\u003cbr\u003e• 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate\u003cbr\u003e• Configurable push-pull or open-drain output\u003cbr\u003e• Output enable pin to quickly disable all the outputs. We wrapped up this lovely chip into a breakout board with a couple nice extras\u003cbr\u003e• Terminal block for power input (or you can use the 0.1\" breakouts on the side)\u003cbr\u003e• Reverse polarity protection on the terminal block input\u003cbr\u003e• Green power-good LED\u003cbr\u003e• 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1\" so you can only stack 4 next to each other on 0.1\" header\u003cbr\u003e• \"Chain-able\" design\u003cbr\u003e• A spot to place a big capacitor on the V+ line (in case you need it)\u003cbr\u003e• 330 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial\u003cbr\u003e• Solder jumpers for the 6 address select pins\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 16-Channel 12-bit PWM\/Servo Driver","published_at":"2018-09-18T10:42:44+08:00","created_at":"2018-09-18T10:47:08+08:00","vendor":"diymore","type":"Servo","tags":["Arduino","Shield"],"price":699,"price_min":699,"price_max":699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":19208881307706,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"060015","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"16 Channel 12-bit PWM Servo Drive Shield Board -I2C PCA9685 for Arduino","public_title":null,"options":["Default Title"],"price":699,"weight":25,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/060015_1_647.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_7_131.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_2_990.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_3_960.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_4_664.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_5_894.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_6_744.jpg?v=1588655795","\/\/www.diymore.cc\/cdn\/shop\/products\/060015_8_310.jpg?v=1588655795"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_1_647.jpg?v=1588655795","options":["Title"],"media":[{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678814916679,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_1_647.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_1_647.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815014983,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_7_131.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_7_131.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815309895,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_2_990.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_2_990.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815408199,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_3_960.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_3_960.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815506503,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_4_664.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_4_664.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815637575,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_5_894.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_5_894.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815670343,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_6_744.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_6_744.jpg?v=1588655795","width":1000},{"alt":"16 Channel 12-Bit Pwm Servo Drive Shield Board -I2C Pca9685 For Arduino","id":6678815834183,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_8_310.jpg?v=1588655795"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/060015_8_310.jpg?v=1588655795","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eYou want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now?\u003cbr\u003eUsing only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e• It's an i2c-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, its completely free running!\u003cbr\u003e• It is 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs (this is good for when you want to control white or blue LEDs with 3.4+ forward voltages)\u003cbr\u003e• 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs\u003cbr\u003e• Adjustable frequency PWM up to about 1.6 KHz\u003cbr\u003e• 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate\u003cbr\u003e• Configurable push-pull or open-drain output\u003cbr\u003e• Output enable pin to quickly disable all the outputs. We wrapped up this lovely chip into a breakout board with a couple nice extras\u003cbr\u003e• Terminal block for power input (or you can use the 0.1\" breakouts on the side)\u003cbr\u003e• Reverse polarity protection on the terminal block input\u003cbr\u003e• Green power-good LED\u003cbr\u003e• 3 pin connectors in groups of 4 so you can plug in 16 servos at once (Servo plugs are slightly wider than 0.1\" so you can only stack 4 next to each other on 0.1\" header\u003cbr\u003e• \"Chain-able\" design\u003cbr\u003e• A spot to place a big capacitor on the V+ line (in case you need it)\u003cbr\u003e• 330 ohm series resistors on all the output lines to protect them, and to make driving LEDs trivial\u003cbr\u003e• Solder jumpers for the 6 address select pins\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x 16-Channel 12-bit PWM\/Servo Driver"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1859961421882,"title":"Battery Shield for WeMos D1 Mini Single Lithium Battery Charging \u0026 Boost","handle":"battery-shield-for-wemos-d1-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eYou can use D1 mini without usb cable, it's really wireless now.\u003cbr\u003ePut D1 mini anywhere, using this battery shield and a lithium Battery.\u003cbr\u003eBoost, just connect lithium Battery to this shield, power supply for the entire D1 mini system.\u003cbr\u003e \u003cbr\u003eCharging, when the battery run out, you do not need to unplug the battery, just using usb port to charging.\u003cbr\u003e1. Connect to lithium Battery (normal 3.3-4.2V)\u003cbr\u003e2. Charging port (normal 5V)\u003cbr\u003e3. Green LED, lights when charging is completed\u003cbr\u003e4. Red LED, lights when charging\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e2*.Normal pins\u003cbr\u003e1*Battery Shield","published_at":"2018-08-27T16:13:55+08:00","created_at":"2018-08-27T16:19:47+08:00","vendor":"diymore","type":"Drive Expansion Board","tags":["Shield","Wireless"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":18395568930874,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040180","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Battery Shield for WeMos D1 Mini Single Lithium Battery Charging \u0026 Boost","public_title":null,"options":["Default Title"],"price":499,"weight":5,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040180_2_769.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_3_629.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_1_182.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_7_112.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_5_349.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_6_113.jpg?v=1588654489","\/\/www.diymore.cc\/cdn\/shop\/products\/040180_4_379.jpg?v=1588654489"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_2_769.jpg?v=1588654489","options":["Title"],"media":[{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678755770439,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_2_769.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_2_769.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678755868743,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_3_629.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_3_629.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678755934279,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_1_182.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_1_182.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678756130887,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_7_112.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_7_112.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678756196423,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_5_349.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_5_349.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678756360263,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_6_113.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_6_113.jpg?v=1588654489","width":1000},{"alt":"Battery Shield For Wemos D1 Mini Single Lithium Charging \u0026 Boost Drive Expansion Board","id":6678756753479,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_4_379.jpg?v=1588654489"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040180_4_379.jpg?v=1588654489","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003eYou can use D1 mini without usb cable, it's really wireless now.\u003cbr\u003ePut D1 mini anywhere, using this battery shield and a lithium Battery.\u003cbr\u003eBoost, just connect lithium Battery to this shield, power supply for the entire D1 mini system.\u003cbr\u003e \u003cbr\u003eCharging, when the battery run out, you do not need to unplug the battery, just using usb port to charging.\u003cbr\u003e1. Connect to lithium Battery (normal 3.3-4.2V)\u003cbr\u003e2. Charging port (normal 5V)\u003cbr\u003e3. Green LED, lights when charging is completed\u003cbr\u003e4. Red LED, lights when charging\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e2*.Normal pins\u003cbr\u003e1*Battery Shield"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1826457714746,"title":"Expansion Prototype Shield I\/O Extension Board Module for Arduino Nano V3.0","handle":"expansion-prototype-shield-i-o-extension-board-module-for-arduino-nano-v3-0","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eDraw out all of the digital I\/o mouth and analog I\/o mouth, every IO mouth has the positive and negative power supply interface standard\u003c\/li\u003e\n\u003cli\u003eLead the I2C interface on the main board, convenient and connection of the I2C device\u003c\/li\u003e\n\u003cli\u003eIncrease the DC power supply interface. The NANO plate on the USB interface power supply current is actual only 50 ma, to bring high current equipment such as steering gear, when I was at this time in DC power supply interface provides an external power supply, ensure the stability of equipment operation.\u003c\/li\u003e\n\u003cli\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/li\u003e\n\u003cli\u003e8 analog Pin with power output and GND\u003c\/li\u003e\n\u003cli\u003e6 PWM Pin\u003c\/li\u003e\n\u003cli\u003e1 Servo power input\u003c\/li\u003e\n\u003cli\u003eI2C expansion Pin\u003c\/li\u003e\n\u003cli\u003eAREF output\u003c\/li\u003e\n\u003cli\u003e3.3V output\u003c\/li\u003e\n\u003cli\u003eSize:6x5.3x1.3cm(approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x Prototype Shield I\/O Extension Board\u003cbr\u003e\u003cbr\u003e","published_at":"2018-08-16T14:52:07+08:00","created_at":"2018-08-16T14:54:29+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Nano","Nano V3.0","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861885001786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"020049","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Expansion Prototype Shield I\/O Extension Board Module for Arduino Nano V3.0","public_title":null,"options":["Default Title"],"price":499,"weight":22,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/020049_1_840.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_2_340.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_3_141.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_8_773.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_9_945.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_4_168.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_5_629.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_7_619.jpg?v=1588652749","\/\/www.diymore.cc\/cdn\/shop\/products\/020049_6_521.jpg?v=1588652749"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_1_840.jpg?v=1588652749","options":["Title"],"media":[{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678699540551,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_1_840.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_1_840.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678699638855,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_2_340.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_2_340.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678699671623,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_3_141.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_3_141.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678699769927,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_8_773.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_8_773.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678700032071,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_9_945.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_9_945.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678700064839,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_4_168.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_4_168.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678700163143,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_5_629.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_5_629.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678700326983,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_7_619.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_7_619.jpg?v=1588652749","width":1000},{"alt":"Expansion Prototype Shield I\/o Extension Board Module For Arduino Nano V3.0","id":6678700359751,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_6_521.jpg?v=1588652749"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/020049_6_521.jpg?v=1588652749","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eDraw out all of the digital I\/o mouth and analog I\/o mouth, every IO mouth has the positive and negative power supply interface standard\u003c\/li\u003e\n\u003cli\u003eLead the I2C interface on the main board, convenient and connection of the I2C device\u003c\/li\u003e\n\u003cli\u003eIncrease the DC power supply interface. The NANO plate on the USB interface power supply current is actual only 50 ma, to bring high current equipment such as steering gear, when I was at this time in DC power supply interface provides an external power supply, ensure the stability of equipment operation.\u003c\/li\u003e\n\u003cli\u003e14 I\/O Pin (servo type with GND, power and signal)\u003c\/li\u003e\n\u003cli\u003e8 analog Pin with power output and GND\u003c\/li\u003e\n\u003cli\u003e6 PWM Pin\u003c\/li\u003e\n\u003cli\u003e1 Servo power input\u003c\/li\u003e\n\u003cli\u003eI2C expansion Pin\u003c\/li\u003e\n\u003cli\u003eAREF output\u003c\/li\u003e\n\u003cli\u003e3.3V output\u003c\/li\u003e\n\u003cli\u003eSize:6x5.3x1.3cm(approx)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x Prototype Shield I\/O Extension Board\u003cbr\u003e\u003cbr\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1822343528506,"title":"Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0","handle":"expansion-board-terminal-adapter-diy-kits-for-arduino-nano-io-shield-v1-0","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNew Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0\u003cbr\u003eIO Expansion Shield For Arduino Nano is specifically designed to facilitate\u003cbr\u003ean easy connection between Expansion Shield For Arduino Nano and many other devices.\u003cbr\u003eIn essence, it expands for Arduino Nano controller to link those devices in a simple and trouble free manner.\u003cbr\u003ePCB size: 5.5*3.8cm\u003cbr\u003ePCB Board color: Blue \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS * Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0","published_at":"2018-08-15T18:14:18+08:00","created_at":"2018-08-15T18:17:54+08:00","vendor":"diymore","type":"Adapter Module","tags":["Arduino","Kits","Nano","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":199,"compare_at_price_min":199,"compare_at_price_max":199,"compare_at_price_varies":false,"variants":[{"id":17820392063034,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011151","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0","public_title":null,"options":["Default Title"],"price":499,"weight":20,"compare_at_price":199,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/011151_2_111.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_1_942.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_3_758.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_4_360.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_5_299.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_6_506.jpg?v=1588652429","\/\/www.diymore.cc\/cdn\/shop\/products\/011151_7_820.jpg?v=1588652429"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_2_111.jpg?v=1588652429","options":["Title"],"media":[{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678688432199,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_2_111.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_2_111.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678688727111,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_1_942.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_1_942.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678688792647,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_3_758.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_3_758.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678688989255,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_4_360.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_4_360.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678689251399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_5_299.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_5_299.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678689513543,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_6_506.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_6_506.jpg?v=1588652429","width":1000},{"alt":"Expansion Board Terminal Adapter Diy Kits For Arduino Nano Io Shield V1.0 Module","id":6678689579079,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_7_820.jpg?v=1588652429"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011151_7_820.jpg?v=1588652429","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eNew Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0\u003cbr\u003eIO Expansion Shield For Arduino Nano is specifically designed to facilitate\u003cbr\u003ean easy connection between Expansion Shield For Arduino Nano and many other devices.\u003cbr\u003eIn essence, it expands for Arduino Nano controller to link those devices in a simple and trouble free manner.\u003cbr\u003ePCB size: 5.5*3.8cm\u003cbr\u003ePCB Board color: Blue \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1PCS * Expansion Board Terminal Adapter DIY Kits for Arduino NANO IO Shield V1.0"}
22% OFF
Translation missing: en.products.product.regular_price
$26.99
$20.99
On Sale
{"id":1803659444282,"title":"W5100 Ethernet Shield for Arduino Main Board UNO R3 ATMega 328 1280 MEGA2560","handle":"w5100-ethernet-shield-for-arduino-main-board-uno-r3-atmega-328-1280-mega2560","description":"\u003cstrong\u003eOverview: \u003c\/strong\u003e \u003cbr\u003eWith this Ethernet Shield, your Arduino board can be used to connect to internet.\u003cbr\u003eCan be used as server or client.\u003cbr\u003eDirectly plug puzzle board, no soldering required.\u003cbr\u003eController: W5100\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThis is the latest version of the Ethernet Shield.\u003cbr\u003eThis Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.\u003cbr\u003eIt is directly supported by Arduino official Ethernet Library.\u003cbr\u003eIt adds a micro-SD card slot, which can be used to store files for serving over the network.\u003cbr\u003eIt is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280\/2560) and can be accessed using the SD library.\u003cbr\u003eThe Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.\u003cbr\u003eIt supports up to four simultaneous socket connections.\u003cbr\u003eUse the Ethernet library to write sketches which connect to the internet using the shield.\u003cbr\u003eFits all version of arduino Main board,2009,UNO, mega 1280, mega 2560.\u003cbr\u003eSize:7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X W5100 Ethernet Shield","published_at":"2018-08-08T15:52:01+08:00","created_at":"2018-08-08T15:53:42+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","MEGA2560","Shield","UNO R3"],"price":2099,"price_min":2099,"price_max":2099,"available":true,"price_varies":false,"compare_at_price":2699,"compare_at_price_min":2699,"compare_at_price_max":2699,"compare_at_price_varies":false,"variants":[{"id":17477064130618,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010113","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"W5100 Ethernet Shield for Arduino Main Board UNO R3 ATMega 328 1280 MEGA2560","public_title":null,"options":["Default Title"],"price":2099,"weight":30,"compare_at_price":2699,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/1_479.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/2_0f1cb850-8ac5-44a1-b660-d90a83e0eb07_203.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/3_9e06c8c9-5f71-4b4c-81a1-b6cf2030121f_171.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/4_6d6e034b-0590-427a-bfcf-255e2fea1bf3_943.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/5_9601c9bb-b39f-43a3-a170-2d10a7ac32a6_708.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/6_1a49e1bd-e638-44ee-b825-13c95cfd6851_303.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/7_91159863-926e-4fbf-a959-7e0722ad3c59_207.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/8_aaabfd5e-ef2f-4abf-ac13-960f02b8d233_302.jpg?v=1588650693","\/\/www.diymore.cc\/cdn\/shop\/products\/010113_5_439.jpg?v=1588650693"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_479.jpg?v=1588650693","options":["Title"],"media":[{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678596223047,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_479.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/1_479.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678596255815,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_0f1cb850-8ac5-44a1-b660-d90a83e0eb07_203.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/2_0f1cb850-8ac5-44a1-b660-d90a83e0eb07_203.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678596321351,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9e06c8c9-5f71-4b4c-81a1-b6cf2030121f_171.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/3_9e06c8c9-5f71-4b4c-81a1-b6cf2030121f_171.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678596485191,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6d6e034b-0590-427a-bfcf-255e2fea1bf3_943.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/4_6d6e034b-0590-427a-bfcf-255e2fea1bf3_943.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678596583495,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_9601c9bb-b39f-43a3-a170-2d10a7ac32a6_708.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/5_9601c9bb-b39f-43a3-a170-2d10a7ac32a6_708.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678597435463,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_1a49e1bd-e638-44ee-b825-13c95cfd6851_303.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/6_1a49e1bd-e638-44ee-b825-13c95cfd6851_303.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678597533767,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_91159863-926e-4fbf-a959-7e0722ad3c59_207.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/7_91159863-926e-4fbf-a959-7e0722ad3c59_207.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678597599303,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/8_aaabfd5e-ef2f-4abf-ac13-960f02b8d233_302.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/8_aaabfd5e-ef2f-4abf-ac13-960f02b8d233_302.jpg?v=1588650693","width":1000},{"alt":"W5100 Ethernet Shield For Arduino Main Board Uno R3 Atmega 328 1280 Mega2560 Expansion Module","id":6678597632071,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010113_5_439.jpg?v=1588650693"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010113_5_439.jpg?v=1588650693","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eOverview: \u003c\/strong\u003e \u003cbr\u003eWith this Ethernet Shield, your Arduino board can be used to connect to internet.\u003cbr\u003eCan be used as server or client.\u003cbr\u003eDirectly plug puzzle board, no soldering required.\u003cbr\u003eController: W5100\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThis is the latest version of the Ethernet Shield.\u003cbr\u003eThis Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.\u003cbr\u003eIt is directly supported by Arduino official Ethernet Library.\u003cbr\u003eIt adds a micro-SD card slot, which can be used to store files for serving over the network.\u003cbr\u003eIt is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280\/2560) and can be accessed using the SD library.\u003cbr\u003eThe Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.\u003cbr\u003eIt supports up to four simultaneous socket connections.\u003cbr\u003eUse the Ethernet library to write sketches which connect to the internet using the shield.\u003cbr\u003eFits all version of arduino Main board,2009,UNO, mega 1280, mega 2560.\u003cbr\u003eSize:7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };.\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 X W5100 Ethernet Shield"}
$3.99
{"id":1767761215546,"title":"WS2812B RGB Shield for WeMos D1 mini ESP8266 Module Board","handle":"ws2812b-rgb-shield-for-wemos-d1-mini-esp8266-module-board","description":"\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x WS2812B RGB Shield","published_at":"2018-07-27T10:29:58+08:00","created_at":"2018-07-27T10:33:32+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["ESP8266","Shield"],"price":399,"price_min":399,"price_max":699,"available":true,"price_varies":true,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32645195628615,"title":"1pcs","option1":"1pcs","option2":null,"option3":null,"sku":"040177","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WS2812B RGB Shield for WeMos D1 mini ESP8266 Module Board - 1pcs","public_title":"1pcs","options":["1pcs"],"price":399,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]},{"id":32645195661383,"title":"5pcs","option1":"5pcs","option2":null,"option3":null,"sku":"0401775","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WS2812B RGB Shield for WeMos D1 mini ESP8266 Module Board - 5pcs","public_title":"5pcs","options":["5pcs"],"price":699,"weight":4,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040177_7_193.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_6_904.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_8_178.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_1_176.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_2_786.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_4_101.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_3_167.jpg?v=1588647864","\/\/www.diymore.cc\/cdn\/shop\/products\/040177_5_995.jpg?v=1588647864"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_7_193.jpg?v=1588647864","options":["Size"],"media":[{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678501654599,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_7_193.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_7_193.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678501752903,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_6_904.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_6_904.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678501883975,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_8_178.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_8_178.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678501982279,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_1_176.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_1_176.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678502015047,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_2_786.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_2_786.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678502047815,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_4_101.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_4_101.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678502113351,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_3_167.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_3_167.jpg?v=1588647864","width":1000},{"alt":"Ws2812B Rgb Shield For Wemos D1 Mini Esp8266 Module Board Expansion","id":6678502178887,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_5_995.jpg?v=1588647864"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040177_5_995.jpg?v=1588647864","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1 x WS2812B RGB Shield"}
Translation missing: en.products.product.regular_price
$4.99
{"id":1728052822074,"title":"1 Channel 5V Relay Module Shield for Arduino Uno Meage 2560 1280 ARM PIC AVR DSP","handle":"5pcs-1-channel-5v-relay-module-shield-for-arduino-uno-meage-2560-1280-arm-pic-avr-dsp","description":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith isolation groove in control area and load area.\u003c\/li\u003e\n\u003cli\u003e With power and relay action indication, bright when connect and go off when disconnects.\u003c\/li\u003e\n\u003cli\u003eWhen there is a signal in signal input, public side and common side will breakover.\u003c\/li\u003e\n\u003cli\u003eIt can be not only used as a microcontroller development board module, but also as a home appliance control.\u003c\/li\u003e\n\u003cli\u003eIt can not only control the DC or AC signal, but the 220V AC load.\u003c\/li\u003e\n\u003cli\u003eWith a permanent open and close vents contact. It is convenient to connect with blue KF301 terminal access control cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVCC: Power interface ,5V\u003c\/li\u003e\n\u003cli\u003eGND: Ground\u003c\/li\u003e\n\u003cli\u003eIN: Control interface .Drive Current at least 4mA\u003c\/li\u003e\n\u003cli\u003eCOM: Control circuit ground ,Connect to GND\u003c\/li\u003e\n\u003cli\u003eSize: approx. 41 x 16 x 16mm\/ 1.61 x 0.62 x 0.62''\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eHigh level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.\u003c\/li\u003e\n\u003cli\u003e Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.\u003c\/li\u003e\n\u003cli\u003ePlease allow 1-3mm differs due to manual measurement.\u003c\/li\u003e\n\u003cli\u003eDue to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1PCS \u003cspan\u003ex \u003c\/span\u003e1 Channel 5V Relay Module Shield\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-07-18T17:14:55+08:00","created_at":"2018-07-18T17:19:05+08:00","vendor":"diymore","type":"1-Channel Delay Relay","tags":["Arduino","Display","Relay","Shield"],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":16221360619578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011928","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1 Channel 5V Relay Module Shield for Arduino Uno Meage 2560 1280 ARM PIC AVR DSP","public_title":null,"options":["Default Title"],"price":499,"weight":65,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/011928_9_147.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_1_109.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_3_153.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_2_320.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_4_649.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_5_537.jpg?v=1588644531","\/\/www.diymore.cc\/cdn\/shop\/products\/011928_7_659.jpg?v=1588644531"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_9_147.jpg?v=1588644531","options":["Title"],"media":[{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370025543,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_9_147.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_9_147.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370222151,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_1_109.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_1_109.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370353223,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_3_153.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_3_153.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370484295,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_2_320.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_2_320.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370648135,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_4_649.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_4_649.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370811975,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_5_537.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_5_537.jpg?v=1588644531","width":1000},{"alt":"1 Channel 5V Relay Module Shield For Arduino Uno Meage 2560 1280 Arm Pic Avr Dsp 1-Channel Delay","id":6678370943047,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_7_659.jpg?v=1588644531"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011928_7_659.jpg?v=1588644531","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWith isolation groove in control area and load area.\u003c\/li\u003e\n\u003cli\u003e With power and relay action indication, bright when connect and go off when disconnects.\u003c\/li\u003e\n\u003cli\u003eWhen there is a signal in signal input, public side and common side will breakover.\u003c\/li\u003e\n\u003cli\u003eIt can be not only used as a microcontroller development board module, but also as a home appliance control.\u003c\/li\u003e\n\u003cli\u003eIt can not only control the DC or AC signal, but the 220V AC load.\u003c\/li\u003e\n\u003cli\u003eWith a permanent open and close vents contact. It is convenient to connect with blue KF301 terminal access control cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eVCC: Power interface ,5V\u003c\/li\u003e\n\u003cli\u003eGND: Ground\u003c\/li\u003e\n\u003cli\u003eIN: Control interface .Drive Current at least 4mA\u003c\/li\u003e\n\u003cli\u003eCOM: Control circuit ground ,Connect to GND\u003c\/li\u003e\n\u003cli\u003eSize: approx. 41 x 16 x 16mm\/ 1.61 x 0.62 x 0.62''\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 12g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eHigh level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.\u003c\/li\u003e\n\u003cli\u003e Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.\u003c\/li\u003e\n\u003cli\u003ePlease allow 1-3mm differs due to manual measurement.\u003c\/li\u003e\n\u003cli\u003eDue to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1PCS \u003cspan\u003ex \u003c\/span\u003e1 Channel 5V Relay Module Shield\u003c\/li\u003e\n\u003c\/ul\u003e"}
Translation missing: en.products.product.regular_price
$4.99
{"id":4295674232903,"title":"Micro SD TF Card Storage Memory Module SPI Level Conversion Module for Arduino","handle":"micro-sd-storage-board-tf-card-memory-shield-module-spi-interface-level-converter-for-arduino-3-3v-5v-regulator-circuit","description":"Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V 5v, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003cbr\u003e\u003cbr\u003e1 PCB Dimensions: 38 (L) mm * 18mm (W) * 1.6mm (thickness)\u003cbr\u003e2 with two positioning holes, 2.2mm in diameter\u003cbr\u003e3 Compatible with 3.3V and 5V power input\u003cbr\u003e4 board level conversion circuit, compatible with 3.3V and 5V signal input\u003cbr\u003e5 of 7 control interface pins (3.3 GND VCC MISO MOSI SCK CS) GND for the land, 3.3 to 3.3V power input, VCC is 5V power input MISO MOSI SCK is SPI bus chip select signal CS is pin\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e 1PCS*Micro SD TF Card Storage Memory Module SPI Level conversion For Arduino hot \u003cbr\u003e\u003cbr\u003e","published_at":"2019-10-22T14:36:31+08:00","created_at":"2019-10-22T14:38:18+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30938347339847,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010523","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Micro SD TF Card Storage Memory Module SPI Level Conversion Module for Arduino","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010523_9_954.jpg?v=1588666947","\/\/www.diymore.cc\/cdn\/shop\/products\/010523_1_298.jpg?v=1588666947","\/\/www.diymore.cc\/cdn\/shop\/products\/010523_2_709.jpg?v=1588666947","\/\/www.diymore.cc\/cdn\/shop\/products\/010523_4_333.jpg?v=1588666947","\/\/www.diymore.cc\/cdn\/shop\/products\/010523_5_568.jpg?v=1588666947","\/\/www.diymore.cc\/cdn\/shop\/products\/010523_6_467.jpg?v=1588666947"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_9_954.jpg?v=1588666947","options":["Title"],"media":[{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679733436487,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_9_954.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_9_954.jpg?v=1588666947","width":1000},{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679733698631,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_1_298.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_1_298.jpg?v=1588666947","width":1000},{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679734353991,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_2_709.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_2_709.jpg?v=1588666947","width":1000},{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679734583367,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_4_333.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_4_333.jpg?v=1588666947","width":1000},{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679735337031,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_5_568.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_5_568.jpg?v=1588666947","width":1000},{"alt":"Micro Sd Storage Board Tf Card Memory Shield Module Spi Interface Level Converter For Arduino 3.3V","id":6679735959623,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_6_467.jpg?v=1588666947"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010523_6_467.jpg?v=1588666947","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"Support Micro SD Card, Micro SDHC card (high-speed card) The level conversion circuit board that can interface level is 5V or 3.3V Communication interface is a standard SPI interface Control Interface: A total of six pins (GND, VCC, MISO, MOSI, SCK, CS), GND to ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin; 3.3V regulator circuit: LDO regulator output 3.3V as level converter chip, Micro SD card supply; Level conversion circuit: Micro SD card into the direction of signals into 3.3V 5v, MicroSD card toward the direction of the control interface MISO signal is also converted to 3.3V, general AVR microcontroller system can read the signal; Micro SD card connector: yes since the bomb deck for easy card insertion and removal.\u003cbr\u003e\u003cbr\u003e1 PCB Dimensions: 38 (L) mm * 18mm (W) * 1.6mm (thickness)\u003cbr\u003e2 with two positioning holes, 2.2mm in diameter\u003cbr\u003e3 Compatible with 3.3V and 5V power input\u003cbr\u003e4 board level conversion circuit, compatible with 3.3V and 5V signal input\u003cbr\u003e5 of 7 control interface pins (3.3 GND VCC MISO MOSI SCK CS) GND for the land, 3.3 to 3.3V power input, VCC is 5V power input MISO MOSI SCK is SPI bus chip select signal CS is pin\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e 1PCS*Micro SD TF Card Storage Memory Module SPI Level conversion For Arduino hot \u003cbr\u003e\u003cbr\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":4295658209351,"title":"Duemilanove MEGA Sensor Shield V4 Digital Analog Module Servo Motor for Arduino UNO","handle":"duemilanove-mega-sensor-shield-v4-digital-analog-module-servo-motor-for-arduino-uno","description":"1. Just plug \u0026amp; play.\u003cbr\u003e2. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\u003cbr\u003e3. Operating Voltage: 5VDC.\u003cbr\u003e4. Input Voltage (recommended): 7-12VDC.\u003cbr\u003e5. Input Voltage (limits): 6-20VDC.\u003cbr\u003e6. Buckled Analog Port : Handy, solid connection to 6 Analog inputs with VCC\/GND.\u003cbr\u003e7. Digital IO port : 13 ports prepared to digital modules or servos.\u003cbr\u003e8. Analog IO Port: 2.54 grid male pin header connections.\u003cbr\u003e9. Buckled Communication Port : Selectable between I2C and UARt.\u003cbr\u003e10. Size: 7cm x 5.6cm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Including:\u003c\/strong\u003e\u003cbr\u003e1pcs x Duemilanove MEGA Sensor Shield V4 Digital Analog Module Servo Motor for Arduino UNO","published_at":"2019-10-22T14:14:59+08:00","created_at":"2019-10-22T14:21:40+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30938155647047,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010318","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Duemilanove MEGA Sensor Shield V4 Digital Analog Module Servo Motor for Arduino UNO","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010318_1_319.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_9_737.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_2_474.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_4_754.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_6_604.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_7_633.jpg?v=1588666883","\/\/www.diymore.cc\/cdn\/shop\/products\/010318_10_116.jpg?v=1588666883"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_1_319.jpg?v=1588666883","options":["Title"],"media":[{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679724064839,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_1_319.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_1_319.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679724621895,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_9_737.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_9_737.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679725277255,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_2_474.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_2_474.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679725473863,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_4_754.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_4_754.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679726325831,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_6_604.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_6_604.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679726424135,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_7_633.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_7_633.jpg?v=1588666883","width":1000},{"alt":"Duemilanove Mega Sensor Shield V4 Digital Analog Module Servo Motor For Arduino Uno Expansion","id":6679727276103,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_10_116.jpg?v=1588666883"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010318_10_116.jpg?v=1588666883","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"1. Just plug \u0026amp; play.\u003cbr\u003e2. Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\u003cbr\u003e3. Operating Voltage: 5VDC.\u003cbr\u003e4. Input Voltage (recommended): 7-12VDC.\u003cbr\u003e5. Input Voltage (limits): 6-20VDC.\u003cbr\u003e6. Buckled Analog Port : Handy, solid connection to 6 Analog inputs with VCC\/GND.\u003cbr\u003e7. Digital IO port : 13 ports prepared to digital modules or servos.\u003cbr\u003e8. Analog IO Port: 2.54 grid male pin header connections.\u003cbr\u003e9. Buckled Communication Port : Selectable between I2C and UARt.\u003cbr\u003e10. Size: 7cm x 5.6cm.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePackage Including:\u003c\/strong\u003e\u003cbr\u003e1pcs x Duemilanove MEGA Sensor Shield V4 Digital Analog Module Servo Motor for Arduino UNO"}
Translation missing: en.products.product.regular_price
$4.99
{"id":4295653654599,"title":"5A\/20A\/30A Range ACS712\/GY712\/ZMCT103C Current Sensor Module for Arduino DIY","handle":"acs712-5a-range-current-sensor-module-board-for-arduino-5v-5a-hall-current-sensor-expansion-board-module","description":"1.The current sensor chips: ACS712ELC-05B\u003cbr\u003e2.Pin 5V power supply, on-board power indicator\u003cbr\u003e3.The module can measure the positive and negative 5 amps, corresponding to the analog output 185mV \/ A\u003cbr\u003e4.No test current through the output voltage is VCC \/ 2\u003cbr\u003e5.PCB board size: 31 (mm) x13 (mm)\u003cbr\u003eNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003cbr\u003e1 * 5A range Current Sensor ACS712 Module","published_at":"2019-10-22T14:08:49+08:00","created_at":"2019-10-22T14:11:11+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30938131988551,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010296","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"5A\/20A\/30A Range ACS712\/GY712\/ZMCT103C Current Sensor Module for Arduino DIY","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010294_1_168.jpg?v=1588666843","\/\/www.diymore.cc\/cdn\/shop\/products\/010296_1_0d8c6741-bd66-41aa-a206-d75e2a26dcd5_340.jpg?v=1588666843","\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_b47ea40b-d28e-46b5-8db8-d1314e937319_548.jpg?v=1588666843","\/\/www.diymore.cc\/cdn\/shop\/products\/010296_3_660.jpg?v=1588666843","\/\/www.diymore.cc\/cdn\/shop\/products\/010296_4_1834ec80-8f55-48d8-a4d2-e7663ab1139c_209.jpg?v=1588666843","\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_644.jpg?v=1588666843"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010294_1_168.jpg?v=1588666843","options":["Title"],"media":[{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679720034375,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010294_1_168.jpg?v=1588666843"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010294_1_168.jpg?v=1588666843","width":1000},{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679720296519,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_1_0d8c6741-bd66-41aa-a206-d75e2a26dcd5_340.jpg?v=1588666843"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_1_0d8c6741-bd66-41aa-a206-d75e2a26dcd5_340.jpg?v=1588666843","width":1000},{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679720820807,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_b47ea40b-d28e-46b5-8db8-d1314e937319_548.jpg?v=1588666843"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_b47ea40b-d28e-46b5-8db8-d1314e937319_548.jpg?v=1588666843","width":1000},{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679721246791,"position":4,"preview_image":{"aspect_ratio":1.078,"height":928,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_3_660.jpg?v=1588666843"},"aspect_ratio":1.078,"height":928,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_3_660.jpg?v=1588666843","width":1000},{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679721967687,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_4_1834ec80-8f55-48d8-a4d2-e7663ab1139c_209.jpg?v=1588666843"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_4_1834ec80-8f55-48d8-a4d2-e7663ab1139c_209.jpg?v=1588666843","width":1000},{"alt":"Acs712 5A Range Current Sensor Module Board For Arduino 5V Hall Expansion Shield","id":6679722426439,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_644.jpg?v=1588666843"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010296_2_644.jpg?v=1588666843","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"1.The current sensor chips: ACS712ELC-05B\u003cbr\u003e2.Pin 5V power supply, on-board power indicator\u003cbr\u003e3.The module can measure the positive and negative 5 amps, corresponding to the analog output 185mV \/ A\u003cbr\u003e4.No test current through the output voltage is VCC \/ 2\u003cbr\u003e5.PCB board size: 31 (mm) x13 (mm)\u003cbr\u003eNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003cbr\u003e1 * 5A range Current Sensor ACS712 Module"}
Translation missing: en.products.product.regular_price
$5.99
{"id":4295616430151,"title":"Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee for Arduino Board","handle":"bluetooth-xbee-shield-v03-module-wireless-control-for-xbee-zigbee-for-arduino-board","description":"\u003cspan\u003eThis shield V03 can achieve a simple two crunodal ZigBee network,achieve wireless communication between with for arduino ,and allows the with for arduino to wireless communicate over a modified ZigBee protocol using the popular XBee module.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.\u003c\/span\u003e","published_at":"2019-10-22T13:12:30+08:00","created_at":"2019-10-22T13:15:51+08:00","vendor":"diymore","type":"Bluetooth Module","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":500,"compare_at_price_min":500,"compare_at_price_max":500,"compare_at_price_varies":false,"variants":[{"id":30937745326151,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010304","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Bluetooth XBee Shield V03 Module Wireless Control For XBee ZigBee for Arduino Board","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":500,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010304_03_937.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_01_345.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_02_111.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_2_601.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_4_592.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_5_322.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_10_233.jpg?v=1588666821","\/\/www.diymore.cc\/cdn\/shop\/products\/010304_8_282.jpg?v=1588666821"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_03_937.jpg?v=1588666821","options":["Title"],"media":[{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679716986951,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_03_937.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_03_937.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679717412935,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_01_345.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_01_345.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679717642311,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_02_111.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_02_111.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679718068295,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_2_601.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_2_601.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679718264903,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_4_592.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_4_592.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679718461511,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_5_322.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_5_322.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679718658119,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_10_233.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_10_233.jpg?v=1588666821","width":1000},{"alt":"Bluetooth Xbee Shield V03 Module Wireless Control For Zigbee For Arduino Board","id":6679719804999,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_8_282.jpg?v=1588666821"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010304_8_282.jpg?v=1588666821","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cspan\u003eThis shield V03 can achieve a simple two crunodal ZigBee network,achieve wireless communication between with for arduino ,and allows the with for arduino to wireless communicate over a modified ZigBee protocol using the popular XBee module.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIt is a fully Assembled shield without the XBee module. It works with all XBee modules including the Series 1 and Series 2.5, standard and Pro versions.\u003c\/span\u003e"}
Translation missing: en.products.product.regular_price
$5.99
{"id":4294037798983,"title":"V5 Sensor Shield Expansion Board Shield For Arduino UNO R3 V5.0 Electric Module","handle":"v5-sensor-shield-expansion-board-shield-for-arduino-uno-r3-v5-0-electric-module","description":"\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:arial, helvetica, sans-serif;\"\u003eDescription:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"white-space:normal;\"\u003e\n\t \n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003e100% Brand new and high quality!\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eColor: Same as the picture show\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eMaterial: Metal\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eSize: 57¡Á57¡Á19mm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cdiv\u003e\n\t\t \n\t\u003c\/div\u003e\n\t\u003cdiv\u003e\n\t\t\u003cstrong\u003e\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:18px;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\n\t\t\u003cdiv\u003e\n\t\t\t \n\t\t\u003c\/div\u003e\n\t\t\u003cdiv\u003e\n\t\t\t\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003e 1pc ¡Á Sensor Shield Expansion Board Shield For Arduino UNO R3 V5.0 Electric Module New\u003c\/span\u003e\n\t\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2019-10-21T20:18:18+08:00","created_at":"2019-10-21T20:18:22+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931839287367,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011962","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"V5 Sensor Shield Expansion Board Shield For Arduino UNO R3 V5.0 Electric Module","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/r7k1f7k5P2Z9y4h6z8j0_942.jpg?v=1588666615","\/\/www.diymore.cc\/cdn\/shop\/products\/011962_2_382.jpg?v=1588666615","\/\/www.diymore.cc\/cdn\/shop\/products\/011962_4_924.jpg?v=1588666615","\/\/www.diymore.cc\/cdn\/shop\/products\/011962_3_803.jpg?v=1588666615","\/\/www.diymore.cc\/cdn\/shop\/products\/011962_5_942.jpg?v=1588666615"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/r7k1f7k5P2Z9y4h6z8j0_942.jpg?v=1588666615","options":["Title"],"media":[{"alt":"V5 Sensor Shield Expansion Board For Arduino Uno R3 V5.0 Electric Module","id":6679694147655,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/r7k1f7k5P2Z9y4h6z8j0_942.jpg?v=1588666615"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/r7k1f7k5P2Z9y4h6z8j0_942.jpg?v=1588666615","width":1000},{"alt":"V5 Sensor Shield Expansion Board For Arduino Uno R3 V5.0 Electric Module","id":6679694409799,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_2_382.jpg?v=1588666615"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_2_382.jpg?v=1588666615","width":1000},{"alt":"V5 Sensor Shield Expansion Board For Arduino Uno R3 V5.0 Electric Module","id":6679694901319,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_4_924.jpg?v=1588666615"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_4_924.jpg?v=1588666615","width":1000},{"alt":"V5 Sensor Shield Expansion Board For Arduino Uno R3 V5.0 Electric Module","id":6679695032391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_3_803.jpg?v=1588666615"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_3_803.jpg?v=1588666615","width":1000},{"alt":"V5 Sensor Shield Expansion Board For Arduino Uno R3 V5.0 Electric Module","id":6679695491143,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_5_942.jpg?v=1588666615"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011962_5_942.jpg?v=1588666615","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-size:18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family:arial, helvetica, sans-serif;\"\u003eDescription:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/p\u003e\n\u003cp style=\"white-space:normal;\"\u003e\n\t \n\u003c\/p\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003e100% Brand new and high quality!\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eColor: Same as the picture show\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eMaterial: Metal\u003c\/span\u003e \u003cbr\u003e\n\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003eSize: 57¡Á57¡Á19mm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t \n\u003c\/div\u003e\n\u003cdiv style=\"white-space:normal;\"\u003e\n\t\u003cdiv\u003e\n\t\t \n\t\u003c\/div\u003e\n\t\u003cdiv\u003e\n\t\t\u003cstrong\u003e\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:18px;\"\u003ePackage included:\u003c\/span\u003e\u003c\/strong\u003e\n\t\t\u003cdiv\u003e\n\t\t\t \n\t\t\u003c\/div\u003e\n\t\t\u003cdiv\u003e\n\t\t\t\u003cspan style=\"font-family:arial, helvetica, sans-serif;font-size:16px;\"\u003e 1pc ¡Á Sensor Shield Expansion Board Shield For Arduino UNO R3 V5.0 Electric Module New\u003c\/span\u003e\n\t\t\u003c\/div\u003e\n\t\u003c\/div\u003e\n\u003c\/div\u003e"}
Translation missing: en.products.product.regular_price