18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266 Wifi

18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266 Wifi

SKU:X13129
Regular price $6.99

shipped within one bussiness day

 

This module is a portable mobile power supply that supports 3V / 1A and 5V / 2.2A two voltage outputs!

5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery!

MICRO USB charging current 600mA-800mA,

Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer!

 

Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!

 


 

Battery protection(Over charge or Over discharge)
Micro USB port Input
Type-A USB Output
0.5A current charging
1 switch control USB output
5~8V Input Voltage
3V & 1A Output
5V & 2A Output
LED indicate(Green means full,Red means charging)
3V output port x3
5V output port x3
Be careful of "+" and "-", You should follow the direction of "+""-" on the PCB.
If you put wrong direction, charging chip will be destroyed.
This product does not include 18650 battery

Size: 9.8x2.9cm/3.86x1.14inch
Quantity: 1 Set

1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.

2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

 

 

 

 


 

 

 

Description:

100% brand new and high quality
High Speed USB 2.0 Cable
Compatible with Cellphones, GPS systems, PDAs, OTG devices and digital cameras
Cable lenght: 30CM
Complies with fully rated cable specification using braid-and-foil shield protection

This 30CM USB A to Micro USB B 5pin Cable provides one USB A Male connector, and one Micro USB B connector to create a simple way to connect mobile devices to a USB capable computer for every day tasks such as data synchronization and file transfers.

The micro-USB connector is smaller and thinner than the previous USB Mini-b standard while offering better performance.

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

This module is a portable mobile power supply that supports 3V / 1A and 5V / 2.2A two voltage outputs!

5V voltage output rated current is 2.2A, maximum support 3A current (not recommended for overload, easy to damage the module, speed up the service life), the output of current depends on the quality of the 18650 battery!

MICRO USB charging current 600mA-800mA,

Supports up to two 18650 batteries. It is recommended to use two 18650 batteries, which can be longer!

 

Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!

 


 

Battery protection(Over charge or Over discharge)
Micro USB port Input
Type-A USB Output
0.5A current charging
1 switch control USB output
5~8V Input Voltage
3V & 1A Output
5V & 2A Output
LED indicate(Green means full,Red means charging)
3V output port x3
5V output port x3
Be careful of "+" and "-", You should follow the direction of "+""-" on the PCB.
If you put wrong direction, charging chip will be destroyed.
This product does not include 18650 battery

Size: 9.8x2.9cm/3.86x1.14inch
Quantity: 1 Set

1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.

2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

 

 

 

 


 

 

 

Description:

100% brand new and high quality
High Speed USB 2.0 Cable
Compatible with Cellphones, GPS systems, PDAs, OTG devices and digital cameras
Cable lenght: 30CM
Complies with fully rated cable specification using braid-and-foil shield protection

This 30CM USB A to Micro USB B 5pin Cable provides one USB A Male connector, and one Micro USB B connector to create a simple way to connect mobile devices to a USB capable computer for every day tasks such as data synchronization and file transfers.

The micro-USB connector is smaller and thinner than the previous USB Mini-b standard while offering better performance.

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.