Arduino 2.4GHZ NRF24L01+Module with wireless Shield SPI to IIC I2C TWI Interface

Arduino 2.4GHZ NRF24L01+Module with wireless Shield SPI to IIC I2C TWI Interface

SKU:ZH0054
Regular price $4.99 Sale price $3.99

 

NRF24L01+2.4GHz Wireless Transceiver Module

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.

125 Channels, Multi-point communication and frequency hopping to meet the communication needs

Built-in  hardware CRC error detection, Multipoint communication address control.

Low-power 1.9 ~ 3.6V, only 1uA on Power down mode

Built-in 2.4Ghz antenna

Available software to set the address,  only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.

Built-in voltage regulator

Standard DIP Pitch Interface for embedded applications

size: 34mm X 17mm X 1mm

  

NRF24L01 ATMEGA48 MCU Development Board

For Robot control, remote control. Information collection.

Using I2C (TWI) communication protocol, which greatly simplifies the communication process of NRF24L01.
Users do not need to understand the complicated NRF24L01 communication process
which greatly improves the development efficiency.
Adopt NRF24L01 as Wireless communications chip,reliable communication protocol and reducing data loss.
Maximum transmission distance can reach 70m (for reference only).

Specifications:

Operating voltage: 5V
Hold time of Module receives the data:more than 2S
Hold time of Module sends data:more than 300s
Transfer rate: 50Byte / S (theoretical value)
I2C/TWI Address: 0x47 (decimal 35)
NRF24L01 Address: 0x34, 0x43, 0x10, 0x10, 0x01 (from low to high)
Size:44 x 23 x 12mm(L x W x H)
Color:Black
Net weight:6g

 

Package Included:

1 x NRF24L01 Module

1 x NRF240L01 Development Board

  

 

 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

NRF24L01+2.4GHz Wireless Transceiver Module

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.

125 Channels, Multi-point communication and frequency hopping to meet the communication needs

Built-in  hardware CRC error detection, Multipoint communication address control.

Low-power 1.9 ~ 3.6V, only 1uA on Power down mode

Built-in 2.4Ghz antenna

Available software to set the address,  only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.

Built-in voltage regulator

Standard DIP Pitch Interface for embedded applications

size: 34mm X 17mm X 1mm

  

NRF24L01 ATMEGA48 MCU Development Board

For Robot control, remote control. Information collection.

Using I2C (TWI) communication protocol, which greatly simplifies the communication process of NRF24L01.
Users do not need to understand the complicated NRF24L01 communication process
which greatly improves the development efficiency.
Adopt NRF24L01 as Wireless communications chip,reliable communication protocol and reducing data loss.
Maximum transmission distance can reach 70m (for reference only).

Specifications:

Operating voltage: 5V
Hold time of Module receives the data:more than 2S
Hold time of Module sends data:more than 300s
Transfer rate: 50Byte / S (theoretical value)
I2C/TWI Address: 0x47 (decimal 35)
NRF24L01 Address: 0x34, 0x43, 0x10, 0x10, 0x01 (from low to high)
Size:44 x 23 x 12mm(L x W x H)
Color:Black
Net weight:6g

 

Package Included:

1 x NRF24L01 Module

1 x NRF240L01 Development Board

  

 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.