For ESP-M3 ESP8266 ESP-12E ESP8285 ESP-M2 Strong CH340 WIFI Development Board

For ESP-M3 ESP8266 ESP-12E ESP8285 ESP-M2 Strong CH340 WIFI Development Board

SKU:020109
Regular price $6.99

Features:
  • DM Strong Series:"DIY MORE" has 2 series -Plus and Strong. The ESP8285 ESP-M2 wireless WIFI development board is the new member of DM strong
  • ESP8285--Highly Integrated Chip:ESP8285=ESP8266+1M Flash, fully compatible with ESP8266, source code can be used for transplantation
  • Features of the ESP-M2:The ESP-M2 strong uses the cost-effective module ESP-M2. The ESP-M2/M3 module uses the ESP8285 chip. The chip integrates an enhanced Tensilica's L106 32-bit core processor with on-chip SRAM in a smaller package
  • It connects to the computer through Micro USB. It is very convenient for arduino IDE to downloads the program. We have exported all I/Os and power supplies. It can be easily connected to your application through the DuPont cable
  • The ESP8285 has a complete Wi-Fi network function that can be used independently or as a slave to run on other host MCUs. When the ESP8285 hosts the application, it can boot directly from the external Flash
  • Deep sleep maintains current of 10uA, shutdown current less than 5uA, wakes up, connects and transmits data packets within 2 ms
  • The built-in cache memory helps improve system performance and optimizes the storage system. In addition, the ESP8285 can be used as a Wi-Fi adapter only through the SPI/SDIO interface or I2C/UART port, and it can be applied to any microcontroller-based design.
  • Built-in Tensilica L106 ultra-low-power 32-bit microprocessor, clocked at 80MHz and 160MHz, supporting RTOS, built-in TCP/IP protocol stack
  • Built-in 1 channel 10 bit high precision ADC, peripheral interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
  • Standby power consumption less than 1.0mW (DTIM3)
  • Built-in 1M byte SPI Flash


Functional Diagram:



Package Included:


1 X ESP8285 ESP-M2 WIFI Development Board

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Features:
  • DM Strong Series:"DIY MORE" has 2 series -Plus and Strong. The ESP8285 ESP-M2 wireless WIFI development board is the new member of DM strong
  • ESP8285--Highly Integrated Chip:ESP8285=ESP8266+1M Flash, fully compatible with ESP8266, source code can be used for transplantation
  • Features of the ESP-M2:The ESP-M2 strong uses the cost-effective module ESP-M2. The ESP-M2/M3 module uses the ESP8285 chip. The chip integrates an enhanced Tensilica's L106 32-bit core processor with on-chip SRAM in a smaller package
  • It connects to the computer through Micro USB. It is very convenient for arduino IDE to downloads the program. We have exported all I/Os and power supplies. It can be easily connected to your application through the DuPont cable
  • The ESP8285 has a complete Wi-Fi network function that can be used independently or as a slave to run on other host MCUs. When the ESP8285 hosts the application, it can boot directly from the external Flash
  • Deep sleep maintains current of 10uA, shutdown current less than 5uA, wakes up, connects and transmits data packets within 2 ms
  • The built-in cache memory helps improve system performance and optimizes the storage system. In addition, the ESP8285 can be used as a Wi-Fi adapter only through the SPI/SDIO interface or I2C/UART port, and it can be applied to any microcontroller-based design.
  • Built-in Tensilica L106 ultra-low-power 32-bit microprocessor, clocked at 80MHz and 160MHz, supporting RTOS, built-in TCP/IP protocol stack
  • Built-in 1 channel 10 bit high precision ADC, peripheral interface HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
  • Standby power consumption less than 1.0mW (DTIM3)
  • Built-in 1M byte SPI Flash


Functional Diagram:



Package Included:


1 X ESP8285 ESP-M2 WIFI Development Board

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.