STM32F103R8T6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board STM32F103C8T6

STM32F103R8T6 ARM STM32 Minimum System Development Board Module For Arduino Minimum System Board STM32F103C8T6

SKU:020036
Regular price $35.99 Sale price $25.99

Product Discription:
 
STM32 F103 RBT6 SCM system board core board ARM Cortex-M3 development board
 
STM32 F103 RBT6 function
- The maximum operating frequency of 72MHz, up 1.25DMips / MHz (Dhrystone at zero wait cycle memory access
2.1)
- Single-cycle multiply and hardware divide
Memory
- From 64K or 128K bytes of Flash program memory
- Up to 20K bytes of SRAM
clock, reset and power management
- 2.0 to 3.6 V power supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring
Device (PVD)
- 4 ~ 16MHz crystal oscillator
- Built by the factory tuned 8MHz RC oscillator
- Embedded with calibrated 40kHz RC oscillator
- To generate the CPU clock PLL
- 32kHz RTC oscillator with calibration function
Low power consumption
- Sleep, shutdown and standby mode
- VBAT supply for RTC and backup registers
2 12-bit ADC, 1μs conversion time (up to 16
Input channels)
- Conversion range: 0 to 3.6V
- Dual sample and hold function
- Temperature Sensor
DMA:
- 7-channel DMA controller
- Supported peripherals: timers, ADC, SPI, I2C and
USART
Up to 80 fast I / O ports
- 26/37/51/80 an I / O port, all I / O ports can be mapped to
16 external interrupts; almost all the ports can tolerate 5V signal
debug mode
- Serial wire debug (SWD) and JTAG interfaces
Up to 7 timers
- Three 16-bit timers, each timer has up to four for
Input capture / output compare / PWM or pulse counting channel
And incremental encoder input
- 1 x 16 with dead-band control and emergency brake for motors
Advanced control timer PWM control
- 2 watchdog timers (independent and window type)
- System timer: 24-type counter is decremented
Up to 9 communication interfaces
- Up to two I2C interface (supports SMBus / PMBus)
- Up to three USART interface (supports ISO7816 interface,
LIN, IrDA interface and modem control)
- Up to two SPI interfaces (18M bit / sec)
- CAN interface (2.0B Active)
- USB 2.0 full speed interface
CRC calculating unit 96 the unique code chip 
 
Package Included:
 
1*STM32F103RBT6 ARM STM32 Minimum System Development Board Cortex-m3 M76 New
 
 

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

020036 (1)020036 (2)020036 (3)020036 (5)020036 (7)020036 (8)020036 (9)020036 (10)

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Product Discription:
 
STM32 F103 RBT6 SCM system board core board ARM Cortex-M3 development board
 
STM32 F103 RBT6 function
- The maximum operating frequency of 72MHz, up 1.25DMips / MHz (Dhrystone at zero wait cycle memory access
2.1)
- Single-cycle multiply and hardware divide
Memory
- From 64K or 128K bytes of Flash program memory
- Up to 20K bytes of SRAM
clock, reset and power management
- 2.0 to 3.6 V power supply and I / O pins
- Power on / off reset (POR / PDR), programmable voltage monitoring
Device (PVD)
- 4 ~ 16MHz crystal oscillator
- Built by the factory tuned 8MHz RC oscillator
- Embedded with calibrated 40kHz RC oscillator
- To generate the CPU clock PLL
- 32kHz RTC oscillator with calibration function
Low power consumption
- Sleep, shutdown and standby mode
- VBAT supply for RTC and backup registers
2 12-bit ADC, 1μs conversion time (up to 16
Input channels)
- Conversion range: 0 to 3.6V
- Dual sample and hold function
- Temperature Sensor
DMA:
- 7-channel DMA controller
- Supported peripherals: timers, ADC, SPI, I2C and
USART
Up to 80 fast I / O ports
- 26/37/51/80 an I / O port, all I / O ports can be mapped to
16 external interrupts; almost all the ports can tolerate 5V signal
debug mode
- Serial wire debug (SWD) and JTAG interfaces
Up to 7 timers
- Three 16-bit timers, each timer has up to four for
Input capture / output compare / PWM or pulse counting channel
And incremental encoder input
- 1 x 16 with dead-band control and emergency brake for motors
Advanced control timer PWM control
- 2 watchdog timers (independent and window type)
- System timer: 24-type counter is decremented
Up to 9 communication interfaces
- Up to two I2C interface (supports SMBus / PMBus)
- Up to three USART interface (supports ISO7816 interface,
LIN, IrDA interface and modem control)
- Up to two SPI interfaces (18M bit / sec)
- CAN interface (2.0B Active)
- USB 2.0 full speed interface
CRC calculating unit 96 the unique code chip 
 
Package Included:
 
1*STM32F103RBT6 ARM STM32 Minimum System Development Board Cortex-m3 M76 New
 
 

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

020036 (1)020036 (2)020036 (3)020036 (5)020036 (7)020036 (8)020036 (9)020036 (10)

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.