16340 Battery Shield ESP8266 ESP32 Power Bank Supply Module For Arduino UNO R3

16340 Battery Shield ESP8266 ESP32 Power Bank Supply Module For Arduino UNO R3

SKU:012651
Regular price $9.99

Type 1

Our engineers have carefully designed an for arduino mobile power supply. Our design can get rid of the dependence of the adapter. You can take out your artwork and share it with friends anytime, anywhere. Isn't it great!
The mobile power is stacked on the for Arduino board and powered via the 5V/GND pin. We also provide a USB-A output interface that you can use to connect to other devices using a USB cable. The charging interface is micro USB, and the charging tool is very convenient to obtain (such as: for Android mobile phone adapter). When it is stopped, it is recommended to turn off the power output and let the mobile power supply enter the standby state, thus saving limited battery energy.
We use 16340 lithium battery (need to buy it yourself), you can use only one battery, you can also use 2 batteries to get more long-lasting life. Two 16340 lithium batteries (depending on the battery capacity) about 1500mAH capacity.
Lithium Battery Model: 16340
Charging current: 500mA
Discharge current: 1000mA
Package include:
1 x 16340 Rechargeable Lithium Battery Shield Power Bank Board






Type 2

1.Adapter 16340 lithium battery;
2. 5V and 3.3V dual output;
3.Built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage and short circuit protection;
4.Built-in battery anti-reverse protection;
5.The toggle switch can freely turn the output.
Technical Parameters:
Charging interface: MicroUSB (Android port)
Charging voltage: 4.5V~5.5V
Charging current: 580mA max
Output interface: 2.5mm header and standard USB socket
5V output current: 1.3A max
3.3V output current: 1.0A max
Charging indicator: red light during charging, full green light
Product size: length 60mm * width 28mm * height 16mm.

Package included:
1PCS 16340 Mobile Power Battery Holder Module





trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Type 1

Our engineers have carefully designed an for arduino mobile power supply. Our design can get rid of the dependence of the adapter. You can take out your artwork and share it with friends anytime, anywhere. Isn't it great!
The mobile power is stacked on the for Arduino board and powered via the 5V/GND pin. We also provide a USB-A output interface that you can use to connect to other devices using a USB cable. The charging interface is micro USB, and the charging tool is very convenient to obtain (such as: for Android mobile phone adapter). When it is stopped, it is recommended to turn off the power output and let the mobile power supply enter the standby state, thus saving limited battery energy.
We use 16340 lithium battery (need to buy it yourself), you can use only one battery, you can also use 2 batteries to get more long-lasting life. Two 16340 lithium batteries (depending on the battery capacity) about 1500mAH capacity.
Lithium Battery Model: 16340
Charging current: 500mA
Discharge current: 1000mA
Package include:
1 x 16340 Rechargeable Lithium Battery Shield Power Bank Board






Type 2

1.Adapter 16340 lithium battery;
2. 5V and 3.3V dual output;
3.Built-in lithium battery protection IC with overcurrent, overvoltage, undervoltage and short circuit protection;
4.Built-in battery anti-reverse protection;
5.The toggle switch can freely turn the output.
Technical Parameters:
Charging interface: MicroUSB (Android port)
Charging voltage: 4.5V~5.5V
Charging current: 580mA max
Output interface: 2.5mm header and standard USB socket
5V output current: 1.3A max
3.3V output current: 1.0A max
Charging indicator: red light during charging, full green light
Product size: length 60mm * width 28mm * height 16mm.

Package included:
1PCS 16340 Mobile Power Battery Holder Module





Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.