T-Beam ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 NEO-6M With OLED

T-Beam ESP32 433/868/915/923Mhz WiFi Bluetooth ESP32 NEO-6M With OLED

SKU:XF0107
Regular price $49.99

Product Features

ESP32
  • Lastest ESP32 Version: REV1
  • WIFI
  • Bluetooth 
  • 8MB PSRAM
  • 4MB Flash
  • 3D Antenna
  • LORA
  • Product Description
  • Working voltage: 1.8~3.7v
  • Acceptable current:10~14mA
  • Transmit current: 120mA AT +20dBm
  •                               90mA AT +17dBm
  •                               29mA AT +13dBm
  • Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
  • Transmit power: +20dBm
  • Receive sensitivity :-139dBm AT LoRa &62.5Khz&SF=12&146bps
  • -136dBm AT LoRa &125Khz&SF=12&293bps
  • -118dBm AT LoRa &125Khz&SF=6&9380bps
  • -123dBm AT FSK&5Khz&1.2Kbps
  • Frequency error:+/-15KHz
  • FIFO space :64Byte
  • Data rate :1.2K~300Kbps AT FSK
  •                    0.018K~37.5Kbps AT LoRa        
  • Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
  • Interface form :SPI
  • Sleep current :0.2uA AT SLEEP
  •                            1.5uA AT IDLE
  • Operating temperature :-40℃- +85℃
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control 
  • Low voltage detection 
  • Fast wake-up and frequency hopping
  • Highly configurable data packet handler
  •  
GPS
  • GPS modules NEO-6M, 3V-5V power supply Universal
  • Destined module with ceramic antenna, signal super
  • Save the configuration parameter data EEPROM Down
  • With data backup battery
  • There are LED signal indicator
  • Default Baud Rate: 9600

Power

  • Power Supply Input USB 5V/1A
  • Charging current 500mA
  • Battery Input  3.7-4.2V
  • Charge IC AXP192
OLED Description:
  • Size:  0.96 inch
  • High resolution: 128 * 64
  • Color:  white
  • Viewing angle:  > 160 °
  • Driver IC:  SSD1306
  • Working temperature:  -30  celcius ~ 80  celcius
  • Module volume (generous):  27.0MM * 27.0MM * 4.1MM
  • Supports many control chip:  Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
  • Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
  • Ultra-low power consumption: Normal operation Is 0.04W
  • IO port occupies minimal display: The IIC communication,as long as the two IO ports

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases\

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

Size picture

Shipping List

433MHz/868MHz Version

  • 1 X TTGO T-Beam 
  • 1 X 433MHz/868MHz Antenna      
  • 1 X 0.96 inch 128X64  OLED
  • 2 X Pin 
  • Note: OLED is not soldered to T-BEAM
  • 915MHz/923MHz Version
  • 1 X TTGO T-Beam 
  • 1 X 915MHz/923MHz Antenna
  • 1 X 0.96 inch 128X64 OLED
  • 2 X Pin  
  • Note:OLED is not soldered to T-BEAM
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Product Features

ESP32
  • Lastest ESP32 Version: REV1
  • WIFI
  • Bluetooth 
  • 8MB PSRAM
  • 4MB Flash
  • 3D Antenna
  • LORA
  • Product Description
  • Working voltage: 1.8~3.7v
  • Acceptable current:10~14mA
  • Transmit current: 120mA AT +20dBm
  •                               90mA AT +17dBm
  •                               29mA AT +13dBm
  • Operating frequency: 433/470MHz(433HMz version) /868M/915M(868MHz version)
  • Transmit power: +20dBm
  • Receive sensitivity :-139dBm AT LoRa &62.5Khz&SF=12&146bps
  • -136dBm AT LoRa &125Khz&SF=12&293bps
  • -118dBm AT LoRa &125Khz&SF=6&9380bps
  • -123dBm AT FSK&5Khz&1.2Kbps
  • Frequency error:+/-15KHz
  • FIFO space :64Byte
  • Data rate :1.2K~300Kbps AT FSK
  •                    0.018K~37.5Kbps AT LoRa        
  • Modulation Mode :FSK,GFSK,MSK,GMSK,LoRa TM,OOK
  • Interface form :SPI
  • Sleep current :0.2uA AT SLEEP
  •                            1.5uA AT IDLE
  • Operating temperature :-40℃- +85℃
  • Digital RSSI function
  • Automatic frequency correction
  • Automatic gain control 
  • Low voltage detection 
  • Fast wake-up and frequency hopping
  • Highly configurable data packet handler
  •  
GPS
  • GPS modules NEO-6M, 3V-5V power supply Universal
  • Destined module with ceramic antenna, signal super
  • Save the configuration parameter data EEPROM Down
  • With data backup battery
  • There are LED signal indicator
  • Default Baud Rate: 9600

Power

  • Power Supply Input USB 5V/1A
  • Charging current 500mA
  • Battery Input  3.7-4.2V
  • Charge IC AXP192
OLED Description:
  • Size:  0.96 inch
  • High resolution: 128 * 64
  • Color:  white
  • Viewing angle:  > 160 °
  • Driver IC:  SSD1306
  • Working temperature:  -30  celcius ~ 80  celcius
  • Module volume (generous):  27.0MM * 27.0MM * 4.1MM
  • Supports many control chip:  Fully compatible with Arduino, 51 series, MSP430 series,STM32/2, CSR chip, etc.  (a lot of routines for reference)
  • Wide voltage support: without any modification, directly supports 3.3V ~ 5V DC
  • Ultra-low power consumption: Normal operation Is 0.04W
  • IO port occupies minimal display: The IIC communication,as long as the two IO ports

More information:

https://github.com/geeksville/Meshtastic-Android/blob/master/README.md

https://github.com/meshtastic/Meshtastic-device/releases\

https://github.com/Xinyuan-LilyGO/LilyGO-T-Beam

Pin Schematic

Size picture

Shipping List

433MHz/868MHz Version

  • 1 X TTGO T-Beam 
  • 1 X 433MHz/868MHz Antenna      
  • 1 X 0.96 inch 128X64  OLED
  • 2 X Pin 
  • Note: OLED is not soldered to T-BEAM
  • 915MHz/923MHz Version
  • 1 X TTGO T-Beam 
  • 1 X 915MHz/923MHz Antenna
  • 1 X 0.96 inch 128X64 OLED
  • 2 X Pin  
  • Note:OLED is not soldered to T-BEAM

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.