0.1-500MHz AD831 High Frequency RF Mixer Driver Amplifier Radio Converter Module

Ad831 0.1-500Mhz 10Dbm Gain High Frequency Rf Mixer Inverter Board Module Radio Converter With Dc

0.1-500MHz AD831 High Frequency RF Mixer Driver Amplifier Radio Converter Module

SKU:X13156
Regular price $10.99

 

 

1. Product Application:
The AD831 is a low distortion, wide dynamic range, single-chip mixer suitable for RF-IF downconversion in HF and VHF receivers, second mixer in DMR base stations, DC-baseband conversion, quadrature modulation And demodulation as well as Doppler shift detection in ultrasound imaging applications.
2. Product characteristics
The AD831 provides a +24 dBm third-order intercept point for -10 dBm LO power consumption without the need for a high-power LO driver and without the corresponding shielding and isolation issues, resulting in improved performance over passive mixers System performance, reduce system cost.
The mixer is designed for single-supply operation, RF, IF and LO ports with DC isolation capacitors, easy to use. RF and LO inputs operate up to 500MHz. The IF output is a single-ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain. The amplifier has low DC offset characteristics, which can be used for DC - baseband frequency conversion and quadrature amplitude demodulation and other DC-coupled applications.
The mixer's output amplifier and the best source impedance, the mixer SSB noise figure at 70 MHz 10.3 dB. Unlike passive mixers, the AD831 does not have insertion loss, eliminates the need for an external duplexer, and requires no passive termination.
3. Specifications
RF input: 0.1-500MHz
RF input: + 10dBm (1dB compression point)
Local oscillator input: 0.1-500MHz
Local oscillator input: -10dBm
IF output: 0.1-200MHz
Supply voltage: 9 - 11V single-ended power supply
 
Package Included :
 
1 x AD831 0.1-500MHz High Frequency RF mixer inverter module
 

 






 

 

 

 

 

 

 

 

 

 
 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 

1. Product Application:
The AD831 is a low distortion, wide dynamic range, single-chip mixer suitable for RF-IF downconversion in HF and VHF receivers, second mixer in DMR base stations, DC-baseband conversion, quadrature modulation And demodulation as well as Doppler shift detection in ultrasound imaging applications.
2. Product characteristics
The AD831 provides a +24 dBm third-order intercept point for -10 dBm LO power consumption without the need for a high-power LO driver and without the corresponding shielding and isolation issues, resulting in improved performance over passive mixers System performance, reduce system cost.
The mixer is designed for single-supply operation, RF, IF and LO ports with DC isolation capacitors, easy to use. RF and LO inputs operate up to 500MHz. The IF output is a single-ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain. The amplifier has low DC offset characteristics, which can be used for DC - baseband frequency conversion and quadrature amplitude demodulation and other DC-coupled applications.
The mixer's output amplifier and the best source impedance, the mixer SSB noise figure at 70 MHz 10.3 dB. Unlike passive mixers, the AD831 does not have insertion loss, eliminates the need for an external duplexer, and requires no passive termination.
3. Specifications
RF input: 0.1-500MHz
RF input: + 10dBm (1dB compression point)
Local oscillator input: 0.1-500MHz
Local oscillator input: -10dBm
IF output: 0.1-200MHz
Supply voltage: 9 - 11V single-ended power supply
 
Package Included :
 
1 x AD831 0.1-500MHz High Frequency RF mixer inverter module
 

 






 

 

 

 

 

 

 

 

 

 
 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.