AC 110~220V 10A Digital Temperature & Humidity Control Thermostat +Probe SHT2000
AC 110~220V 10A Digital Temperature & Humidity Control Thermostat +Probe SHT2000
SKU:X12874- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
- Product Name: Temperature and Humidity Controller
- Product model: SHT2000
- Supply voltage: AC 110~220V
- Power supply frequency: 50/60Hz
- Temperature range: -20~60°C
- Humidity measurement range: 0%~100%RH
- Temperature measurement accuracy: 0.3 °C
- Humidity measurement accuracy: 3%
- Output control: relay output
- Output power: MAX 10A
Setting method: Start value <stop value (program automatically determines working mode is heating/humidifying mode)
Setting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)
Heating/cooling mode setting
Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.
Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.
Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again
The first step: heating mode, starting temperature <stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.
Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!
Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.
The first step: cooling mode, starting temperature > stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.
The third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!
Humidification/Dehumidification Mode Settings:
Setting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.
Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:
Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.
Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification
Setup steps:
Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Customer Reviews
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $10.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":1900829114426,"title":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","handle":"ac-85-230v-10a-sht2000-thermostat-temperature-humidity-control-hygrometer-controller-module-digital-display","description":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e","published_at":"2018-09-13T11:16:49+08:00","created_at":"2018-09-13T11:26:55+08:00","vendor":"diymore","type":"Thermostat","tags":["Display","Relay","STC 1000","STC1000"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":1599,"compare_at_price_min":1599,"compare_at_price_max":1599,"compare_at_price_varies":false,"variants":[{"id":18988114837562,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"X12874","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"AC 110~220V 10A Digital Temperature \u0026 Humidity Control Thermostat +Probe SHT2000","public_title":null,"options":["Default Title"],"price":1599,"weight":102,"compare_at_price":1599,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","options":["Title"],"media":[{"alt":null,"id":7180957745223,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_13.jpg?v=1595581143","width":1000},{"alt":null,"id":7180957777991,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_19.jpg?v=1595581143","width":1000},{"alt":null,"id":7180962857031,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_21_d7a8dcc5-843a-473b-978a-a1b36a705f30.jpg?v=1595581143","width":1000},{"alt":null,"id":7180949487687,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_20.jpg?v=1595581143","width":1000},{"alt":null,"id":7180950306887,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/X12874_24.jpg?v=1595581126","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul\u003e\n\u003cli\u003eProduct Name: Temperature and Humidity Controller\u003c\/li\u003e\n\u003cli\u003eProduct model: SHT2000\u003c\/li\u003e\n\u003cli\u003eSupply voltage: AC 110~220V\u003c\/li\u003e\n\u003cli\u003ePower supply frequency: 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eTemperature range: -20~60°C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement range: 0%~100%RH\u003c\/li\u003e\n\u003cli\u003eTemperature measurement accuracy: 0.3 °C\u003c\/li\u003e\n\u003cli\u003eHumidity measurement accuracy: 3%\u003c\/li\u003e\n\u003cli\u003eOutput control: relay output\u003c\/li\u003e\n\u003cli\u003eOutput power: MAX 10A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSetting method:\u003c\/strong\u003e Start value \u0026lt;stop value (program automatically determines working mode is heating\/humidifying mode)\u003cbr\u003eSetting method: Start value \u0026gt; stop value (the program automatically determines the working mode is cooling\/dehumidifying mode)\u003cbr\u003eHeating\/cooling mode setting\u003cbr\u003eSetting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.\u003cbr\u003eSetting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeating use case:\u003c\/strong\u003e control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again\u003cbr\u003eThe first step: heating mode, starting temperature \u0026lt;stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.\u003cbr\u003eStep 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRefrigeration use case:\u003c\/strong\u003e use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.\u003cbr\u003eThe first step: cooling mode, starting temperature \u0026gt; stop temperature\u003cbr\u003eStep 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.\u003cbr\u003eThe third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eHumidification\/Dehumidification Mode Settings:\u003c\/strong\u003e\u003cbr\u003eSetting (start humidity): Press and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Press and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHumidification example:\u003c\/strong\u003e fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps:\u003cbr\u003e Step 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH.\u003cbr\u003e Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing. Set the value to 80% RH. After the setting is completed, the button will be operated for 5 seconds without returning to the normal display state.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDehumidification example:\u003c\/strong\u003e workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification\u003cbr\u003eSetup steps:\u003c\/p\u003e\n\u003cp\u003eStep 1: Press and hold the △ button for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH.\u003c\/p\u003e\n\u003cp\u003eStep 2: Press and hold the ▽ button for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the button does not operate for 5 seconds, and automatically returns to the normal display state.\u003c\/p\u003e"}