CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter STC Replace FT232 NEW

CP2102 MICRO USB to UART TTL Module 6Pin Serial Converter STC Replace FT232 NEW

SKU:010745
Regular price $4.99

Features:

  • embedded USB transceiver, no external circuit device.
  • Containing clock circuit, no external circuit device; contains power-on reset circuit,The on-chip voltage regulator within the 3.3V output.
  • Meet the USB2.0 specification requirements; SUSPEND pins support USB suspend state.
  • Asynchronous serial data bus compatible with all handshakes and modulation controller interface signals.
  • Support data format is 8 data bits, 1 stop bit and the parity bit.
  • Connotation 512 byte receive buffer and 512 byte transmit buffer, Supports hardware or X-ON / X-OFF Handshake


Description:

  • The original chip CP2102, generate COM port after installing the driver.
  • Then the standard input MICRO MINI-USB cable connected to the computer USB interface, with 3.3V and 5V two power output
  • With a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download
  • On-board status indicators, receiving indicator properly installed drive status indicator remains, send and receive indicator flashes when the communication with run LED indicator.
  • Supports baud rates from 300bps ~ 1Mbps between
  • The communication format support: 1) data bits 5,6,7,8; 2) support 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
  • Supported operating systems: windows 8.1 / 7 / vista / xp / 98, Mac OS-X / OS-9, Linux
  • USB seat MICRO MINI-USB interface Block
  • Chip components for the regular company of welding, stable quality, beautiful appearance
  • With DTR trigger signal output can be directly arduino pro mini ATMEGA328P and other Arduino board download traffic.
  • Module size: 16mm * 20mm super small.


How to install the driver

win7 / win8

  • first open the package, like the way next, remember installation directory
  • according to the following method to start the service
  • Locate the driver in Device Manager, select Update Driver, browse my computer for driver,
  • select the directory just installed, determine waiting like

win8.1

  • Right update drivers automatically find the drivers, it will prompt the driving data is invalid, in fact, the problem often encountered in windows8, the drive is no problem, the beginning has been installed on, and later discovered may be a hardware incompatibility.
  • If you are using Windows8 or windows 8.1, but is non-genuine ghost or other systems, and uses a variety of optimization tools Streamlining system, then in the process of installing the driver, you may encounter the "Data invalid" wrong

"Invalid Data" solutions are as follows:

  • Press Winkey + R on the keyboard, the pop-up "Run" dialog, enter "services.msc",
  • also by under "Computer Management" window, find the "service";
  • Found in the list of services "Device Install Service" and "Device Setup Manager" two service items,
  • make sure these two services is turned on, if not open, you can click the left side of the "Start" service.
Package Included:
  • 1PCS*MICRO USB to UART TTL Module 6Pin Serial Converter CP2102 STC Replace FT232
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Features:

  • embedded USB transceiver, no external circuit device.
  • Containing clock circuit, no external circuit device; contains power-on reset circuit,The on-chip voltage regulator within the 3.3V output.
  • Meet the USB2.0 specification requirements; SUSPEND pins support USB suspend state.
  • Asynchronous serial data bus compatible with all handshakes and modulation controller interface signals.
  • Support data format is 8 data bits, 1 stop bit and the parity bit.
  • Connotation 512 byte receive buffer and 512 byte transmit buffer, Supports hardware or X-ON / X-OFF Handshake


Description:

  • The original chip CP2102, generate COM port after installing the driver.
  • Then the standard input MICRO MINI-USB cable connected to the computer USB interface, with 3.3V and 5V two power output
  • With a resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download
  • On-board status indicators, receiving indicator properly installed drive status indicator remains, send and receive indicator flashes when the communication with run LED indicator.
  • Supports baud rates from 300bps ~ 1Mbps between
  • The communication format support: 1) data bits 5,6,7,8; 2) support 1.5, 2 stop bits; 3) odd, even, mark, space, none parity
  • Supported operating systems: windows 8.1 / 7 / vista / xp / 98, Mac OS-X / OS-9, Linux
  • USB seat MICRO MINI-USB interface Block
  • Chip components for the regular company of welding, stable quality, beautiful appearance
  • With DTR trigger signal output can be directly arduino pro mini ATMEGA328P and other Arduino board download traffic.
  • Module size: 16mm * 20mm super small.


How to install the driver

win7 / win8

  • first open the package, like the way next, remember installation directory
  • according to the following method to start the service
  • Locate the driver in Device Manager, select Update Driver, browse my computer for driver,
  • select the directory just installed, determine waiting like

win8.1

  • Right update drivers automatically find the drivers, it will prompt the driving data is invalid, in fact, the problem often encountered in windows8, the drive is no problem, the beginning has been installed on, and later discovered may be a hardware incompatibility.
  • If you are using Windows8 or windows 8.1, but is non-genuine ghost or other systems, and uses a variety of optimization tools Streamlining system, then in the process of installing the driver, you may encounter the "Data invalid" wrong

"Invalid Data" solutions are as follows:

  • Press Winkey + R on the keyboard, the pop-up "Run" dialog, enter "services.msc",
  • also by under "Computer Management" window, find the "service";
  • Found in the list of services "Device Install Service" and "Device Setup Manager" two service items,
  • make sure these two services is turned on, if not open, you can click the left side of the "Start" service.
Package Included:
  • 1PCS*MICRO USB to UART TTL Module 6Pin Serial Converter CP2102 STC Replace FT232

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.