CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module

CS5460A Serial Single-phase Bi-directional Power Energy Metering ADC Module

SKU:011623
Regular price $5.99

Overview:
  • The CS5460A is a converter that contains two ΔΣ analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration
  • It can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter
  • CS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer
  • CS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy
  • CS5460A is convenient On-chip AC / DC system calibration.The "bootstrap" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction
  • The CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter

Features:
  • Power Data Linearity: Linearity in 1000: 1 dynamic range Is ± 0.1%
  • On-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function
  • Can be "self-guided" from the serial EEPROM smart, not micro Controller
  • AC or DC system calibration
  • A mechanical counter / stepper motor driver
  • In line with IEC687 / 1036, JIS industry standards
  • Power consumption <12mW
  • Optimized shunt interface
  • V to I phase compensation
  • Single-supply ground reference signal
  • 2.5V on-chip reference voltage (maximum temperature drift 60ppm / ℃)
  • Simple three-wire digital serial interface
  • Watchdog Timer
  • With a power monitor
  • Power supply configuration
  • VA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V

Package Included:
1*CS5460A Power Energy Module


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Overview:
  • The CS5460A is a converter that contains two ΔΣ analog-to-digital converters (ADC), high-speed power calculation and a serial interface To-digital converter with a high degree of integration
  • It can be precise measurement and calculation of active energy, instantaneous power, IRMS and VRMS,For the development of single-phase 2-wire or 3-wire meter
  • CS5460A the current can be measured using a low-cost shunt or transformer Voltage is measured with a voltage divider resistor or a voltage transformer
  • CS5460A with the microcontroller to communicate with the bi-directional serial port, the chip pulse input The frequency is proportional to the active energy
  • CS5460A is convenient On-chip AC / DC system calibration.The "bootstrap" feature allows the CS5460A to work independently, After the system power automatically initialized. In the self-boot mode,the CS5460A reads the calibration number from an external EEPROM according to the start instruction
  • The CS5460A operates when using this mode when no additional micro-controller, so when the meter for large quantities Residential energy measurement, can reduce the cost of the meter

Features:
  • Power Data Linearity: Linearity in 1000: 1 dynamic range Is ± 0.1%
  • On-chip functions: can measure power (active), I * V, IRMS and VRMS, with power - pulse conversion function
  • Can be "self-guided" from the serial EEPROM smart, not micro Controller
  • AC or DC system calibration
  • A mechanical counter / stepper motor driver
  • In line with IEC687 / 1036, JIS industry standards
  • Power consumption <12mW
  • Optimized shunt interface
  • V to I phase compensation
  • Single-supply ground reference signal
  • 2.5V on-chip reference voltage (maximum temperature drift 60ppm / ℃)
  • Simple three-wire digital serial interface
  • Watchdog Timer
  • With a power monitor
  • Power supply configuration
  • VA + = +5 V; VA- = 0V; VD + = + 3.3V ~ + 5V

Package Included:
1*CS5460A Power Energy Module


Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.