LNA 0.1-2000 MHz 60dB High Gain Low Noise Amplifier Board RF Broadband Module DC 6-12V 35mA Board

Lna 0.1-2000 Mhz 60Db High Gain Low Noise Amplifier Board Rf Broadband Module Dc 6-12V 35Ma

LNA 0.1-2000 MHz 60dB High Gain Low Noise Amplifier Board RF Broadband Module DC 6-12V 35mA Board

SKU:X13153
Regular price $17.99

Applications:
The amplifier is based on the original 0.1--2000 + MHz (30dB) amplifier, using two-stage cascade is made with low noise, high gain (60dB), and is suitable to detect weak signals.
 
Amplifier parameters indicators:
 
Operating frequency: 0.2-1500MHz
Amplifier Gain: 60dB
Maximum output power: + 10dBm (10mW) @ 1dB compression point
Working Current: 35mA (9V)
Supply voltage: 6--12VDC
System Impedance: 50 ohms
 
The amplifier uses some tips:
1) The amplifier at the operating frequency of less than 500MHz, has a very good gain flatness. The lower the frequency, the higher the gain consistency.
2) The lower limit of the operating frequency of the amplifier input and output capacitors are subject to default is 0.1uF, it can work to 0.2MHz; you can increase the input and output capacitors to extend the lower frequency limit. Applications should pay attention to enhance the power supply decoupling and regulator.
3) When the supply voltage 5-8V changes, can be used as a variable gain amplifier, the gain with the power supply voltage increases. DA control with the power supply voltage, you can control the amplifier gain, the gain adjustment.
4) When the supply voltage is 8-10V, low-end gain of 30dB, at which point the amplifier has a low noise figure and good stability.
5) When the voltage is 12V, maximum gain, low frequency gain up to 32.5dB,
6) Since the amplifier gain very high (60dB), the input attention overload (Fmax = -50dBm), in use should follow the relevant principles of RF and microwave circuit layout.
 
Package Included:
1PCS*60dB RF broadband amplifier 
 

 

 




 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Applications:
The amplifier is based on the original 0.1--2000 + MHz (30dB) amplifier, using two-stage cascade is made with low noise, high gain (60dB), and is suitable to detect weak signals.
 
Amplifier parameters indicators:
 
Operating frequency: 0.2-1500MHz
Amplifier Gain: 60dB
Maximum output power: + 10dBm (10mW) @ 1dB compression point
Working Current: 35mA (9V)
Supply voltage: 6--12VDC
System Impedance: 50 ohms
 
The amplifier uses some tips:
1) The amplifier at the operating frequency of less than 500MHz, has a very good gain flatness. The lower the frequency, the higher the gain consistency.
2) The lower limit of the operating frequency of the amplifier input and output capacitors are subject to default is 0.1uF, it can work to 0.2MHz; you can increase the input and output capacitors to extend the lower frequency limit. Applications should pay attention to enhance the power supply decoupling and regulator.
3) When the supply voltage 5-8V changes, can be used as a variable gain amplifier, the gain with the power supply voltage increases. DA control with the power supply voltage, you can control the amplifier gain, the gain adjustment.
4) When the supply voltage is 8-10V, low-end gain of 30dB, at which point the amplifier has a low noise figure and good stability.
5) When the voltage is 12V, maximum gain, low frequency gain up to 32.5dB,
6) Since the amplifier gain very high (60dB), the input attention overload (Fmax = -50dBm), in use should follow the relevant principles of RF and microwave circuit layout.
 
Package Included:
1PCS*60dB RF broadband amplifier 
 

 

 




 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.