5PCS 5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module

5PCS 5V Micro USB 1A 18650 Lithium Battery Charging Board Charger Module

SKU:01045710
Regular price $5.99



 

 

Specification:

  • The TP4056 is a complete single-cell Li-Ion battery with a constant current/constant voltage linear charger. The SOP40 package with heatsink on the bottom of the TP4056 and fewer external components make the TP4056 ideal for portable applications. The TP4056 is suitable for USB power and adapter power supplies.
  • Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
  • Thermal feedback automatically adjusts the charge current to limit chip temperature during high power operation or high ambient temperature conditions. The charging voltage is fixed at 4.2V, and the charging current can be externally set by a resistor. When the charging current drops to the set value of 1/10 after reaching the final float voltage, the TP4056 will automatically terminate the charging cycle. When the input voltage (AC adapter or USB power) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA. The TP4056 can also be placed in shutdown mode when there is a power supply, reducing the supply current to 55uA.
  • Other features of the TP4056 include battery temperature sensing, undervoltage lockout, automatic recharge, LED status pins for charging and termination.

Feature:

  • 100% brand new and high quality
  • Charge module:Linear charging.
  • Current:1A adjustable.
  • Charge precision:1.5%.
  • Input voltage:4.5V-5.5V.
  • Full charge voltage:4.2V ± 1%
  • Led indicator:red is charging Green is full charged.
  • Input interface:micro USB/mini usb/type-c usb
  • Work temperature:-10° to +85°.
  • Inversed polarity:NO.

 Protection About Type-c usb module and micro usb type-1 module :

  • The battery overcharge protection voltage: 4.28 V
  • Battery overcharge lifting voltage: 4.00 V
  • The battery discharge protection voltage: 3.0 V
  • Battery discharge termination voltage: 3.2 V
  • Battery: over-current protection current 3 a

NOTE:

  • Ampere meter can only be connected to 5v input end of the module.
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • The connection wire should not be too thick.
  • Make sure the connect point is good.
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • NO Reveral polarity.

 Package Included:

  • 5 x 5V Micro USB/Mini USB/Type-c USB 1A 18650 Lithium Battery Charging Board Charger Module

 

 


 

 

 


 


 


 

 

 









 

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155



 

 

Specification:

  • The TP4056 is a complete single-cell Li-Ion battery with a constant current/constant voltage linear charger. The SOP40 package with heatsink on the bottom of the TP4056 and fewer external components make the TP4056 ideal for portable applications. The TP4056 is suitable for USB power and adapter power supplies.
  • Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
  • Thermal feedback automatically adjusts the charge current to limit chip temperature during high power operation or high ambient temperature conditions. The charging voltage is fixed at 4.2V, and the charging current can be externally set by a resistor. When the charging current drops to the set value of 1/10 after reaching the final float voltage, the TP4056 will automatically terminate the charging cycle. When the input voltage (AC adapter or USB power) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA. The TP4056 can also be placed in shutdown mode when there is a power supply, reducing the supply current to 55uA.
  • Other features of the TP4056 include battery temperature sensing, undervoltage lockout, automatic recharge, LED status pins for charging and termination.

Feature:

  • 100% brand new and high quality
  • Charge module:Linear charging.
  • Current:1A adjustable.
  • Charge precision:1.5%.
  • Input voltage:4.5V-5.5V.
  • Full charge voltage:4.2V ± 1%
  • Led indicator:red is charging Green is full charged.
  • Input interface:micro USB/mini usb/type-c usb
  • Work temperature:-10° to +85°.
  • Inversed polarity:NO.

 Protection About Type-c usb module and micro usb type-1 module :

  • The battery overcharge protection voltage: 4.28 V
  • Battery overcharge lifting voltage: 4.00 V
  • The battery discharge protection voltage: 3.0 V
  • Battery discharge termination voltage: 3.2 V
  • Battery: over-current protection current 3 a

NOTE:

  • Ampere meter can only be connected to 5v input end of the module.
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough.
  • The connection wire should not be too thick.
  • Make sure the connect point is good.
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip.
  • NO Reveral polarity.

 Package Included:

  • 5 x 5V Micro USB/Mini USB/Type-c USB 1A 18650 Lithium Battery Charging Board Charger Module

 

 


 

 

 


 


 


 

 

 









 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Customer Reviews

Based on 5 reviews Write a review