TB6612FNG/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR
TB6612FNG/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR
SKU:011340
Regular price
$5.99
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
L298N as main chip, ST corporation production.
Low heat,outstanding anti-interference performance.
High working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w.
Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.
Built-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.
Large capacity filter capacitance,afterflow protection diode, more stable and reliable.
Specification:
Double H bridge drive
Chip: L298N (ST NEW)
Logical voltage: 5V
Drive voltage: 5V-35V
Logical current: 0mA-36mA
Drive current: 2A(MAX single bridge)
Max power: 25W
Size:43 x 43 x 26mm
Net weight: 26g
Package weight:36g
Note:
This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.
When ENA enable IN1 IN2 control OUT1 OUT2
When ENB enable IN3 IN4 control OUT3 OUT4
Package Included:
1 x 25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $8.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $16.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $7.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $59.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $7.99{"id":4294036914247,"title":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","handle":"25w-driver-motor-controller-board-module-l298n-dual-h-bridge-dc-for-arduino-motor-smart-car-robot","description":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e","published_at":"2019-10-21T20:18:02+08:00","created_at":"2019-10-21T20:18:05+08:00","vendor":"diymore","type":"Motor Speed Controller","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30931836960839,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011340","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TB6612FNG\/L298N Dual Motor Driver Stepper Motor Driver Module F Arduino PIC AVR","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","options":["Title"],"media":[{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683629127,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/77D660s079J6j6c4G8G0_877.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679683760199,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_2_288.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684186183,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_5_884.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684284487,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_6_211.jpg?v=1588666525","width":1000},{"alt":"25W Driver Motor Controller Board Module L298N Dual H Bridge Dc For Arduino Smart Car Robot Speed","id":6679684579399,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/011340_1_490.jpg?v=1588666525","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp style=\"white-space: normal;\"\u003eL298N as main chip, ST corporation production.\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLow heat,outstanding anti-interference performance.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eHigh working power to 46v,large current can reach 3A MAX and continue current is 2A, power to 25w. \u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eCan drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eBuilt-in 78M05,get power from drive power,however, when drive power over12V, please use the external 5v power as power supply.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLarge capacity filter capacitance,afterflow protection diode, more stable and reliable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cbr\u003e \u003cspan style=\"font-size: 18px;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSpecification:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDouble H bridge drive\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eChip: L298N (ST NEW)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical voltage: 5V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive voltage: 5V-35V\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eLogical current: 0mA-36mA\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDrive current: 2A(MAX single bridge)\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eMax power: 25W\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eSize:43 x 43 x 26mm\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNet weight: 26g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003ePackage weight:36g\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eNote:\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eThis module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eDO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENA enable IN1 IN2 control OUT1 OUT2\u003c\/span\u003e\u003cbr\u003e \u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003eWhen ENB enable IN3 IN4 control OUT3 OUT4\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 18px;\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv style=\"white-space: normal;\"\u003e\u003cspan style=\"font-family: arial, helvetica, sans-serif;\"\u003e1 x\u003cstrong\u003e \u003c\/strong\u003e25W L298N Dual H Bridge DC Stepper Motor L298N Drive Controller Board Module \u003c\/span\u003e\u003c\/div\u003e"}
