1 Channel 5V Relay Module Shield for Arduino Uno Meage 2560 1280 ARM PIC AVR DSP

1 Channel 5V Relay Module Shield for Arduino Uno Meage 2560 1280 ARM PIC AVR DSP

SKU:011928
Regular price $4.99

Features:
  • With isolation groove in control area and load area.
  •  With power and relay action indication, bright when connect and go off when disconnects.
  • When there is a signal in signal input, public side and common side will breakover.
  • It can be not only used as a microcontroller development board module, but also as a home appliance control.
  • It can not only control the DC or AC signal, but the 220V AC load.
  • With a permanent open and close vents contact. It is convenient to connect with blue KF301 terminal access control cable.
Specification:
  • VCC: Power interface ,5V
  • GND: Ground
  • IN: Control interface .Drive Current at least 4mA
  • COM: Control circuit ground ,Connect to GND
  • Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
  • Weight: approx. 12g
Note:
  • High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
  •  Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
  • Please allow 1-3mm differs due to manual measurement.
  • Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Package Included:
  • 1PCS 1 Channel 5V Relay Module Shield
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Features:
  • With isolation groove in control area and load area.
  •  With power and relay action indication, bright when connect and go off when disconnects.
  • When there is a signal in signal input, public side and common side will breakover.
  • It can be not only used as a microcontroller development board module, but also as a home appliance control.
  • It can not only control the DC or AC signal, but the 220V AC load.
  • With a permanent open and close vents contact. It is convenient to connect with blue KF301 terminal access control cable.
Specification:
  • VCC: Power interface ,5V
  • GND: Ground
  • IN: Control interface .Drive Current at least 4mA
  • COM: Control circuit ground ,Connect to GND
  • Size: approx. 41 x 16 x 16mm/ 1.61 x 0.62 x 0.62''
  • Weight: approx. 12g
Note:
  • High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
  •  Low level flip-flops shows that there are voltage for OV trigger mode between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
  • Please allow 1-3mm differs due to manual measurement.
  • Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Package Included:
  • 1PCS 1 Channel 5V Relay Module Shield

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.