DC 12V 19V 24V to 5V 6A Power 4USB Step Down Buck Module

DC 12V 19V 24V to 5V 6A Power 4USB Step Down Buck Module

SKU:012816
Regular price $4.50 Sale price $3.99

Parameters:
Input voltage: DC 9V-32V
Output voltage: 5.1V
Output current: 3A*2. Two circuits, each with 2 USB, each channel supports a maximum of 3A; the total maximum current of the module can reach 6A.

Module size:
Bare board size: 55*46*20mm (length * width * height)
Bare board net weight: about 28g
Fixed hole spacing: 47*38mm
Input wiring method: 5.5*2.1 female seat, inside and outside negative. It can be equipped with a male head of 5.5*2.1cm. Compatible with 5.5*2.5cm, but it is tight. Note that the input does not have reverse connection protection, and the positive and negative poles cannot be reversed.

Main protection features:
No-load current <2mA
Output overcurrent protection (more than 3.5A protection)
Input overvoltage protection (does not start above 32V, ultimate withstand voltage 45V)
Input undervoltage protection (about 8V)
Output short circuit protection (short circuit off output)
Output overvoltage protection (if the chip is out of control, the output voltage is too high, it will be limited to 6V)
Input reverse connection protection
Input 5A fuse

Support mobile phone charging protocol:
Divider1/Divider2/Divider3 charging protocol (for Apple)
D+/D– set 1.2V mode (for Samsung)
BC1.2 DCP and CTIS YD/T 1591-2009 charging agreement
Special reminder: QC Qualcomm fast charge is not supported, VOOC fast charge of OPPO/VIVO is not supported, and SCP/FCP Huawei fast charge is not supported.

Package Included:
1*DC 12V 19V 24V to 5V 6A Power Step Down Buck Module
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Parameters:
Input voltage: DC 9V-32V
Output voltage: 5.1V
Output current: 3A*2. Two circuits, each with 2 USB, each channel supports a maximum of 3A; the total maximum current of the module can reach 6A.

Module size:
Bare board size: 55*46*20mm (length * width * height)
Bare board net weight: about 28g
Fixed hole spacing: 47*38mm
Input wiring method: 5.5*2.1 female seat, inside and outside negative. It can be equipped with a male head of 5.5*2.1cm. Compatible with 5.5*2.5cm, but it is tight. Note that the input does not have reverse connection protection, and the positive and negative poles cannot be reversed.

Main protection features:
No-load current <2mA
Output overcurrent protection (more than 3.5A protection)
Input overvoltage protection (does not start above 32V, ultimate withstand voltage 45V)
Input undervoltage protection (about 8V)
Output short circuit protection (short circuit off output)
Output overvoltage protection (if the chip is out of control, the output voltage is too high, it will be limited to 6V)
Input reverse connection protection
Input 5A fuse

Support mobile phone charging protocol:
Divider1/Divider2/Divider3 charging protocol (for Apple)
D+/D– set 1.2V mode (for Samsung)
BC1.2 DCP and CTIS YD/T 1591-2009 charging agreement
Special reminder: QC Qualcomm fast charge is not supported, VOOC fast charge of OPPO/VIVO is not supported, and SCP/FCP Huawei fast charge is not supported.

Package Included:
1*DC 12V 19V 24V to 5V 6A Power Step Down Buck Module

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.