1.5A Mini Dual Channel DC Motor Driver Module L298N PWM Speed Control

1.5A Mini Dual Channel DC Motor Driver Module L298N PWM Speed Control

SKU:011339
Regular price $1.59 Sale price $0.99

shipped within one bussiness day

Overview:
  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots.
  • Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors, can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed.
  • Each can provide continuous current of 1.5A, peak current up to 2.5A, thermal protection and can be automatically restored.

Features:
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  • L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
  • Small size, light weight, 0 standby current, is the ideal choice for your car model.

Product Parameters:
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
  • The module supply voltage 2V-10V.
  • Signal input voltage 1.8-7V.
  • Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA).
  • Built-in common conduction circuit, when the input pin is left floating, the motor does not malfunction.
  • Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about motor stall.
  • Product Size: 24.7 * 21 * 5mm (length, width, height), ultra-small size.
  • The mounting hole diameter: 2 mm.

Precautions:
1. Power positive and negative reversed will certainly cause damage to the circuit.
2. Output is shorted to ground or output short circuit, and the motor stall, the chip will heat protection, but in the near or exceeding 10V voltage and peak current is greater than 2.5A situation can also cause chip burned.

Package Included:
1x 1.5A DC Motor Driver Module
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
Overview:
  • Motor drive module is ideal for use in battery-powered smart car, toy cars, robots.
  • Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors, can achieve forward rotation or reverse rotation, it is possible to adjust the rotation speed.
  • Each can provide continuous current of 1.5A, peak current up to 2.5A, thermal protection and can be automatically restored.

Features:
  • Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
  • L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn
  • Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
  • Small size, light weight, 0 standby current, is the ideal choice for your car model.

Product Parameters:
  • Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
  • The module supply voltage 2V-10V.
  • Signal input voltage 1.8-7V.
  • Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA).
  • Built-in common conduction circuit, when the input pin is left floating, the motor does not malfunction.
  • Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about motor stall.
  • Product Size: 24.7 * 21 * 5mm (length, width, height), ultra-small size.
  • The mounting hole diameter: 2 mm.

Precautions:
1. Power positive and negative reversed will certainly cause damage to the circuit.
2. Output is shorted to ground or output short circuit, and the motor stall, the chip will heat protection, but in the near or exceeding 10V voltage and peak current is greater than 2.5A situation can also cause chip burned.

Package Included:
1x 1.5A DC Motor Driver Module

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Free Shipping
All order over $50.00
Money Come Back
All order over $50.00
Member Discount
All order over $50.00
24/7 Support
All order over $50.00
Gift Voucher
All order over $50.00