ADXL203 AD8605 Amplifier Module 2 Axis Accelerometer Tilt Measurement Sensor DIY

ADXL203 AD8605 Amplifier Module 2 Axis Accelerometer Tilt Measurement Sensor DIY

SKU:180027
Regular price $19.99

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

EVALUATION AND DESIGN SUPPORT
Circuit Evaluation Boards
CN-0189 Circuit Evaluation Board (EVAL-CN0189-SDPZ)
System Demonstration Platform (EVAL-SDP-CB1Z)
Design and Integration Files
Schematics, Layout Files, Bill of Materials
CIRCUIT FUNCTION AND BENEFITS
The circuit, shown in Figure 1, incorporates a dual axis
ADXL203 accelerometer and the AD7887 12-bit successive
approximation (SAR) ADC to create a dual axis tilt
measurement system.
The ADXL203 is a polysilicon surface micromachined sensor
and signal conditioning circuit. Acceleration in the X or Y axis will produce a corresponding output voltage on the XOUT or
YOUT output pins of the device. The X axis and Y axis are
perpendicular to one another. The AD8608 quad op amp
buffers, attenuates, and level shifts the ADXL203 outputs so
they are at the proper levels to drive the inputs of the AD7887.
The rail-to-rail input/output AD8608 is chosen for its low offset
voltage (65 μV maximum), low bias current (1 pA maximum),
low noise (8 nV/√Hz), and small footprint (14-lead SOIC or
TSSOP).
The AD7887 is configurable for either dual or single channel
operation via the on-chip control register. In this application it
is configured for dual channel mode, allowing the user to
monitor both outputs of the ADXL203, thereby providing a
more accurate and complete solution.
HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS
DSC_0085 DSC_0092
HTB1CoFQi_TI8KJjSsphq6AFppXax
HTB1hs.8XfvsK1RjSspdq6AZepXaz
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

EVALUATION AND DESIGN SUPPORT
Circuit Evaluation Boards
CN-0189 Circuit Evaluation Board (EVAL-CN0189-SDPZ)
System Demonstration Platform (EVAL-SDP-CB1Z)
Design and Integration Files
Schematics, Layout Files, Bill of Materials
CIRCUIT FUNCTION AND BENEFITS
The circuit, shown in Figure 1, incorporates a dual axis
ADXL203 accelerometer and the AD7887 12-bit successive
approximation (SAR) ADC to create a dual axis tilt
measurement system.
The ADXL203 is a polysilicon surface micromachined sensor
and signal conditioning circuit. Acceleration in the X or Y axis will produce a corresponding output voltage on the XOUT or
YOUT output pins of the device. The X axis and Y axis are
perpendicular to one another. The AD8608 quad op amp
buffers, attenuates, and level shifts the ADXL203 outputs so
they are at the proper levels to drive the inputs of the AD7887.
The rail-to-rail input/output AD8608 is chosen for its low offset
voltage (65 μV maximum), low bias current (1 pA maximum),
low noise (8 nV/√Hz), and small footprint (14-lead SOIC or
TSSOP).
The AD7887 is configurable for either dual or single channel
operation via the on-chip control register. In this application it
is configured for dual channel mode, allowing the user to
monitor both outputs of the ADXL203, thereby providing a
more accurate and complete solution.
HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS
DSC_0085 DSC_0092
HTB1CoFQi_TI8KJjSsphq6AFppXax
HTB1hs.8XfvsK1RjSspdq6AZepXaz

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.