5V 30A 1-Channel Relay Module Board With Optocoupler H/L Level Triger
5V 30A 1-Channel Relay Module Board With Optocoupler H/L Level Triger
SKU:100010
Regular price
$5.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Description:
- 5V 30A 1-Channel Relay Module with Optocoupler H/L Level Triger
- Module description:
- 30A relay module, normally open interface maximum load: AC 250V/30A, DV 30V/30A
- Optical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA
- Module can be set high level or low level trigger by the jumper
- Power indicator light (green), relay status indicator light (red)
- Module Size:50mm*33mm*24mm
- Technical parameters:
- Voltage version:5V
- The static current:5mA
- Working current:190mA
- Trigger current:2-4mA
- Module interface specifications:
- DC+ : DC power supply positive pole
- DC- :DC power supply negative pole
- IN : signal triggering pin
- JD+ : relay control voltage positive
- JD- : relay control voltage negative
- DC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal
- High and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger
- Normally closed pin (NC) : relay normally closed pin
- Common pin (COM) : relay common pin
- Normally opened pin (NO) : relay normally opened pin
- Rated current of the interface is 16A
Package Included:
- 1 x 5V Relay Module
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $9.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":4789208612935,"title":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","handle":"5v-30a-1-channel-relay-module-board-with-optocoupler-h-l-level-triger","description":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","published_at":"2020-08-12T15:34:27+08:00","created_at":"2020-08-12T15:34:24+08:00","vendor":"DIYMORE","type":"","tags":[],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32504057299015,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"100010","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"5V 30A 1-Channel Relay Module Board With Optocoupler H\/L Level Triger","public_title":null,"options":["Default Title"],"price":599,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","options":["Title"],"media":[{"alt":null,"id":7271488520263,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_1.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488553031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_2.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488585799,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_5.jpg?v=1597217666","width":1000},{"alt":null,"id":7271488618567,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_3.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488651335,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_9.jpg?v=1597217667","width":1000},{"alt":null,"id":7271488684103,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/100010_6.jpg?v=1597217667","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cb\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e5\u003c\/span\u003e\u003c\/b\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e\u003cb\u003eV 30A 1-Channel Relay Module with Optocoupler H\/L Level Triger\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule description:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e30A relay module, normally open interface maximum load: AC 250V\/30A, DV 30V\/30A\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eOptical coupling isolation, driving ability is strong, stable performance;Trigger current is 5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule can be set high level or low level trigger by the jumper\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePower indicator light (green), relay status indicator light (red)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule Size:50mm*33mm*24mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTechnical parameters:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eVoltage version:5V\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eThe static current:5mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eWorking current:190mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eTrigger current:2-4mA\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eModule interface specifications:\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ : DC power supply positive pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC- :DC power supply negative pole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eIN : signal triggering pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD+ : relay control voltage positive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eJD- : relay control voltage negative\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eDC+ and JD+ shorted by jumper cap, DC- and JD- shorted with jumper cap, it is the same voltage between trigger terminal and relay control terminal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eHigh and low level trigger mode selection.Jumper and L pin connection, IN pin is low level triggerJumper and H pin connection, IN pin is high level trigger\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally closed pin (NC) : relay normally closed pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eCommon pin (COM) : relay common pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eNormally opened pin (NO) : relay normally opened pin\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003eRated current of the interface is 16A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003ePackage Included:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan face=\"Verdana\" size=\"2\"\u003e 1 x 5V Relay Module\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e"}