CC2531 Zigbee CC2540 Sniffer Wireless Bluetooth 4.0 Downloader Cable CC Debugger

CC2531 Zigbee CC2540 Sniffer Wireless Bluetooth 4.0 Downloader Cable CC Debugger

SKU:012546
Regular price Sale price $8.99

  
  • Size:4.1*1.6cm
  • Board Thickness:1.6mm
  • Operating Frequency:2.405-2.485GHz
  • Wireless Transmission Speed Rate:1Mbps
  • Power Cosumption:<20mA (receiving);<25mA (transmission)
 

Features:

  • Lead Out 8 IO Ports
  • Debug Pin
  • Matching Different Firmware (Sniffer And BTool) To Achieve Bluetooth Adapter And Protocol Analyzer Function
  • The Dongle Can Be Used As Mini Bluetooth 4.0 Development Board

Note : Need the document , contact us :)

Use as follows:

  • The Packet Sniffer is installed on the computer and the software can be downloaded
  • after the installation is complete open the software, select BLUETOOTH LOW ENERGY,
  • click "start" to enter, insert CC2540 Sniffer USB dongle device, the software will recognize,
  • select, click on the triangle, began to catch the air
  •  At this time we can carry out the agreement analysis.
  • Some customers will use CC2540 to do DONGLE use, this time the device will need to burn CC2540_USBdongle_HostTestRelease_All.hex, open BTOOL after use.     

  

    

   

1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

    

1.Length:29.65mm
2.Width:27.46mm
3.Height:10.95mm

Downloader Cable Bluetooth 4.0 CC2540 zigbee CC2531 Sniffer USB Programmer Wire Download Programming Connector 

 

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips.
It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging
And SmartRF Flash Programmer for flash programming.
The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

 

Features:
1>. Contents in the box:
CC Debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
2>. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
3>. It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4>. It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
5>. The CC Debugger works with IAR EW8051 version 7.51A or later

 


1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:


1.Lead Out 8 IO Ports 
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

  
  • Size:4.1*1.6cm
  • Board Thickness:1.6mm
  • Operating Frequency:2.405-2.485GHz
  • Wireless Transmission Speed Rate:1Mbps
  • Power Cosumption:<20mA (receiving);<25mA (transmission)
 

Features:

  • Lead Out 8 IO Ports
  • Debug Pin
  • Matching Different Firmware (Sniffer And BTool) To Achieve Bluetooth Adapter And Protocol Analyzer Function
  • The Dongle Can Be Used As Mini Bluetooth 4.0 Development Board

Note : Need the document , contact us :)

Use as follows:

  • The Packet Sniffer is installed on the computer and the software can be downloaded
  • after the installation is complete open the software, select BLUETOOTH LOW ENERGY,
  • click "start" to enter, insert CC2540 Sniffer USB dongle device, the software will recognize,
  • select, click on the triangle, began to catch the air
  •  At this time we can carry out the agreement analysis.
  • Some customers will use CC2540 to do DONGLE use, this time the device will need to burn CC2540_USBdongle_HostTestRelease_All.hex, open BTOOL after use.     

  

    

   

1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:
1.Lead Out 8 IO Ports
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

    

1.Length:29.65mm
2.Width:27.46mm
3.Height:10.95mm

Downloader Cable Bluetooth 4.0 CC2540 zigbee CC2531 Sniffer USB Programmer Wire Download Programming Connector 

 

The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips.
It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging
And SmartRF Flash Programmer for flash programming.
The CC Debugger can also be used for controlling selected devices from SmartRF Studio.

 

Features:
1>. Contents in the box:
CC Debugger
Mini USB cable
10-pin flat cable with 2.54mm connector
2>. CC-Debugger can be used to program and debug the following 8051-based system-on-chips from Texas Instruments:
CC1110, CC1111
CC2430, CC2431
CC2510, CC2511
CC2530, CC2531, CC2533
CC2540, CC2541
CC2543, CC2544, CC2545
3>. It is possible to control the same devices from SmartRF Studio. In addition, CC-Debugger can control the following transceivers from SmartRF Studio:
CC1120, CC1121, CC1125, CC1175
CC1100, CC1101, CC110L, CC113L, CC115L
CC2500, CC2520
4>. It can also be used to program the PurePath Wireless devices:
CC8520, CC8521
CC8530, CC8531
5>. The CC Debugger works with IAR EW8051 version 7.51A or later

 


1.Size: 4.1*1.6cm
2.Board Thickness:1.6mm
3.Operating Frequency:2.405-2.485GHz
4.Wireless Transmission Speed Rate:250Kbaud
5.Power Consumption:<20mA (receiving);<25mA (transmission)


Features:


1.Lead Out 8 IO Ports 
2.Debug Pin
3.Matching Firmware To Achieve Analyzer Function

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.