DC 4.35V MAX1879 Lithium Battery 18650 Charging Board Module Solar Power Solar Lithium Battery Charging Board Electronic Diy

Dc 4.35V Max1879 Lithium Battery 18650 Charging Board Module Solar Power Electronic Diy Function Diy

DC 4.35V MAX1879 Lithium Battery 18650 Charging Board Module Solar Power Solar Lithium Battery Charging Board Electronic Diy

SKU:011073
Regular price $3.35


 

 


 

Input of anti-reverse, wrong not to burn! 4MOS anti-reflux, no leakage when not charging!
Automatic polarity output terminal, then the battery can be charged at random! Other cottage with wood? ? !
 
 
Characteristics:
 
¡ï ordinary lithium battery 4.2V, high-voltage lithium battery 4.35V, 3.6V lithium iron phosphate-take
 
¡ï pulse gap detection voltage, the contact resistance is almost no effect
 
¡ï ultra-high accuracy of 0.5% (0.1% actual)
 
¡ï no current limiting through-charging, perfectly compatible with solar panels
 
¡ï anti-reflux, do not drain the battery is fully charged after inputs
 
¡ï automatic battery polarity identification, random access can charge
 
¡ï input of the anti-reverse, reverse does not burn board
 
¡ï thin 3 mm, to facilitate a variety plug the gap in
 
¡ï high efficiency through-charging, self-heating small
 
¡ï Safety Timer 6 hours
 
¡ï full-page full-1 precision resistors, the entire large volume of precious metals
1210 X7R multilayer ceramic capacitor of the most stable temperature characteristics
 
¡ï stoped, the charging status indicator
 
Disadvantages: Any flow of power demanding, there are relatively injury overcharge the battery.
 
The circuit is not directly charge the cell phone circuit boards!
Only for rechargeable lithium batteries!
If you use this charge sheet direct charge mobile phones,
will be free technical support, and will not support the return!
 
 
Parameters:
 
Volume: 28mm * 18mm * 3mm, ultra-thin ultra-small
Input voltage: 4.5-5.5V (not recommended too high, otherwise injury battery)
Cut-off voltage: 4.2V / 4.32V / 3.6V plus or minus 0.5 percent jumper selection
Output current: not limit, equal to the input current
Timeout timer: about 6.25 hours
 
 
Instructions:
 
Charging MAX1879 precision is now recognized as the most accurate.
The charge sheet designed for enthusiasts make fast, accurate and easy to create a universal charger.
To adapt to the growing number of mobile phone lithium batteries.
 
The board can use 4.5-6V perfect solar cell to charge the battery, comes with anti-reflux and highly efficient
(constant current source, then more than 99%), do not waste little bit of solar power.
 
The new direct support 4.35V lithium battery, full cut-off voltage of about 4.32V
(measured note2 charging cut-off voltage is 4.31V) when fully loaded on the phone 100% perfect power
 
When connected to the outermost end of two automatic polarity terminals connected together,
it is recommended to limit the charging current is less than 2A.
 
If direct from fds4435 charging (the output of that hole alone, high current terminal),
it is recommended to limit the charging current is less than 4A. No automatic polarity switching function.
 
Voltage Setting Jumper: a pad in half, put together the corresponding voltage is set,
as shown in the left even from setting 3.6V, rechargeable lithium iron phosphate batteries,
the right even to set up 4.35V, charging high voltage lithium battery, not even the default 4.2V ordinary lithium batteries.
 
Comes without red and blue color / red LED one, you need buy it in our store
At your own soldered to the circuit, welding methods such as baby pictures shown
 
 
NOTE :
 
 
Color LED shortest pin blue pin (or green pins), and therefore the shortest pin
should be marked with the figure above the blue-position welding
 
It is recommended to take a good battery and then power,
or battery voltage is higher than 4V will not be activated if the charge
 
Charging red lights, follow the 1879 pulse shimmering, slow initial charging flicker frequency,
flicker accelerate when approaching full, red light off after full of blue lights
 
If you use ordinary power without limiting, in the series with the input current limiting
resistor suitable to avoid excessive current damaging the power panels and batteries
 
 
Package Included:
 
1PCS * MAX1879 4.35V Lithium Battery 18650 Charging Module PCB Solar Power Anti-reverse










 

 

 

 
 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


 

 


 

Input of anti-reverse, wrong not to burn! 4MOS anti-reflux, no leakage when not charging!
Automatic polarity output terminal, then the battery can be charged at random! Other cottage with wood? ? !
 
 
Characteristics:
 
¡ï ordinary lithium battery 4.2V, high-voltage lithium battery 4.35V, 3.6V lithium iron phosphate-take
 
¡ï pulse gap detection voltage, the contact resistance is almost no effect
 
¡ï ultra-high accuracy of 0.5% (0.1% actual)
 
¡ï no current limiting through-charging, perfectly compatible with solar panels
 
¡ï anti-reflux, do not drain the battery is fully charged after inputs
 
¡ï automatic battery polarity identification, random access can charge
 
¡ï input of the anti-reverse, reverse does not burn board
 
¡ï thin 3 mm, to facilitate a variety plug the gap in
 
¡ï high efficiency through-charging, self-heating small
 
¡ï Safety Timer 6 hours
 
¡ï full-page full-1 precision resistors, the entire large volume of precious metals
1210 X7R multilayer ceramic capacitor of the most stable temperature characteristics
 
¡ï stoped, the charging status indicator
 
Disadvantages: Any flow of power demanding, there are relatively injury overcharge the battery.
 
The circuit is not directly charge the cell phone circuit boards!
Only for rechargeable lithium batteries!
If you use this charge sheet direct charge mobile phones,
will be free technical support, and will not support the return!
 
 
Parameters:
 
Volume: 28mm * 18mm * 3mm, ultra-thin ultra-small
Input voltage: 4.5-5.5V (not recommended too high, otherwise injury battery)
Cut-off voltage: 4.2V / 4.32V / 3.6V plus or minus 0.5 percent jumper selection
Output current: not limit, equal to the input current
Timeout timer: about 6.25 hours
 
 
Instructions:
 
Charging MAX1879 precision is now recognized as the most accurate.
The charge sheet designed for enthusiasts make fast, accurate and easy to create a universal charger.
To adapt to the growing number of mobile phone lithium batteries.
 
The board can use 4.5-6V perfect solar cell to charge the battery, comes with anti-reflux and highly efficient
(constant current source, then more than 99%), do not waste little bit of solar power.
 
The new direct support 4.35V lithium battery, full cut-off voltage of about 4.32V
(measured note2 charging cut-off voltage is 4.31V) when fully loaded on the phone 100% perfect power
 
When connected to the outermost end of two automatic polarity terminals connected together,
it is recommended to limit the charging current is less than 2A.
 
If direct from fds4435 charging (the output of that hole alone, high current terminal),
it is recommended to limit the charging current is less than 4A. No automatic polarity switching function.
 
Voltage Setting Jumper: a pad in half, put together the corresponding voltage is set,
as shown in the left even from setting 3.6V, rechargeable lithium iron phosphate batteries,
the right even to set up 4.35V, charging high voltage lithium battery, not even the default 4.2V ordinary lithium batteries.
 
Comes without red and blue color / red LED one, you need buy it in our store
At your own soldered to the circuit, welding methods such as baby pictures shown
 
 
NOTE :
 
 
Color LED shortest pin blue pin (or green pins), and therefore the shortest pin
should be marked with the figure above the blue-position welding
 
It is recommended to take a good battery and then power,
or battery voltage is higher than 4V will not be activated if the charge
 
Charging red lights, follow the 1879 pulse shimmering, slow initial charging flicker frequency,
flicker accelerate when approaching full, red light off after full of blue lights
 
If you use ordinary power without limiting, in the series with the input current limiting
resistor suitable to avoid excessive current damaging the power panels and batteries
 
 
Package Included:
 
1PCS * MAX1879 4.35V Lithium Battery 18650 Charging Module PCB Solar Power Anti-reverse










 

 

 

 
 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.