DC 5V 2.1A Mobile Power Diy Board 4.2V Charge Discharge Boost Battery Protection Indicator Module 3.7V Lithium 18650 LI-ION

Dc 5V 2.1A Mobile Power Diy Board 4.2V Charge Discharge Boost Battery Protection Indicator Module

DC 5V 2.1A Mobile Power Diy Board 4.2V Charge Discharge Boost Battery Protection Indicator Module 3.7V Lithium 18650 LI-ION

SKU:012781
Regular price $5.99

 
 
 

 
 
 
 
4 in 1 charge/Discharger(boost)/battery protection/Battery level indicator modules
    
DD06CVSA is a multifunctional 3.7V/4.2V Mobile Power Diy  module,3 in 1 Function: charge,discharge and battery protection.
It is very suitable for DIY mobile power.
  
Charge voltage : DC 4.5V-5.2V (If the power supply is 5.2V-5.5V, please parallel diodes (eg SS34 SMB))
Charging current : 0-2.1A 
Charge quiescent current : 100uA
Full charge voltage : 4.2V+-1%.
Discharge current : 0-3.5A;
Discharge quiescent current : 50uA
Discharge conversion efficiency : maximum 96%
Output voltage : 5V
Output current    : 0-2.1A;
Operating ambient temperature :  -20° to +85°
  
Size : 26.7 x 18.1 x 5.7mm
Weight : 1.9g
  
Comes with battery protection, do not need battery protection board 
(if your battery comes with a protective board, it does not matter)
Overcurrent protection(OCP)
Overvoltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP)
  
Pin description:
1 VIN : Charging port +
2 GND : Charging port -
3 BAT : Battery port +
4 GND : Battery port -
5 GND : Output port -
6 VOUT: Output port +
7 KEY : Output trigger port(Low pulse trigger)
  
1 In discharge mode(In the charging mode,the KEY function is invalid),
the KEY Trigger once,turn on the output;Continuous trigger twice: turn off the output.
 
2 When the load access, it will automatically turn on the output.
But if the load is less than 50MA, the output will be turned off after 30 seconds
 
 

 
  012781 (6) 012781 (4) 012781 (7) 012781 (9) 012781 (11) 012781 (13)

 

 

 

 

 

 

 

 

 

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
 
 
 

 
 
 
 
4 in 1 charge/Discharger(boost)/battery protection/Battery level indicator modules
    
DD06CVSA is a multifunctional 3.7V/4.2V Mobile Power Diy  module,3 in 1 Function: charge,discharge and battery protection.
It is very suitable for DIY mobile power.
  
Charge voltage : DC 4.5V-5.2V (If the power supply is 5.2V-5.5V, please parallel diodes (eg SS34 SMB))
Charging current : 0-2.1A 
Charge quiescent current : 100uA
Full charge voltage : 4.2V+-1%.
Discharge current : 0-3.5A;
Discharge quiescent current : 50uA
Discharge conversion efficiency : maximum 96%
Output voltage : 5V
Output current    : 0-2.1A;
Operating ambient temperature :  -20° to +85°
  
Size : 26.7 x 18.1 x 5.7mm
Weight : 1.9g
  
Comes with battery protection, do not need battery protection board 
(if your battery comes with a protective board, it does not matter)
Overcurrent protection(OCP)
Overvoltage protection(OVP)
Short circuit protection(SCP)
Over temperature protection(OTP)
  
Pin description:
1 VIN : Charging port +
2 GND : Charging port -
3 BAT : Battery port +
4 GND : Battery port -
5 GND : Output port -
6 VOUT: Output port +
7 KEY : Output trigger port(Low pulse trigger)
  
1 In discharge mode(In the charging mode,the KEY function is invalid),
the KEY Trigger once,turn on the output;Continuous trigger twice: turn off the output.
 
2 When the load access, it will automatically turn on the output.
But if the load is less than 50MA, the output will be turned off after 30 seconds
 
 

 
  012781 (6) 012781 (4) 012781 (7) 012781 (9) 012781 (11) 012781 (13)

 

 

 

 

 

 

 

 

 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.