LM1036N Fever Volume Control Board Kit For 12V DC/AC Power Supply DIY Kits

Diy Electronic Kit Pcb Board Lm1036N Fever Volume Control Lm1036 Dc Tonal Chip For 12V Dc/ac Power

LM1036N Fever Volume Control Board Kit For 12V DC/AC Power Supply DIY Kits

SKU:011042
Regular price $9.99

 

 
Using the LM1036 DC tonal chip, referring to the official standard circuit design, control range,
with a loudness function, the effect is very good.
DC voltage controlpotentiometer only single joint can control both channels,
and can extend to the plate with an ordinary wire install, without causing noise increases.
AC and DC power inputBlock board has to adapt to different occasions, AC voltage range of 12V-15V, 10V-15V DC voltage.
The components used in all genuine devices, reliable quality, long-term useis not a problem.
Board blue double-sided fiberglass board, fewer components, reasonable alignment, noise,
produced a higher success rate, it is suitable for beginners
 
 
Features:
 
Product Model: LM1036n 
Circuit Board Size: 91mm x 43mm x 30mm/3.58*1.69*1.18" 
Power Supply :Dual AC 10~12V or Dual DC 12-15V 
Potentiometer Spacing: 19mm 
Potentiometer(left to right ): bass control, treble control,
left-right balance control, volume control
 
 
Notice:
 
This is not a finished board. this is KIT only DIY Kit. This is a Kit ,
you need to weld the component by yourself !
DIY kit installation requires some basic electronic production and practical ability,
there is the risk of damage during the process of installing, once the board is powered on,
we are not responsible for the components. thanks for your understanding
 
 
Package Included:
 
 
1 x  LM1036N Fever Volume Control Board Kit For 12V DC/AC Power Supply DIY
 

 

 
 
 
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 
Using the LM1036 DC tonal chip, referring to the official standard circuit design, control range,
with a loudness function, the effect is very good.
DC voltage controlpotentiometer only single joint can control both channels,
and can extend to the plate with an ordinary wire install, without causing noise increases.
AC and DC power inputBlock board has to adapt to different occasions, AC voltage range of 12V-15V, 10V-15V DC voltage.
The components used in all genuine devices, reliable quality, long-term useis not a problem.
Board blue double-sided fiberglass board, fewer components, reasonable alignment, noise,
produced a higher success rate, it is suitable for beginners
 
 
Features:
 
Product Model: LM1036n 
Circuit Board Size: 91mm x 43mm x 30mm/3.58*1.69*1.18" 
Power Supply :Dual AC 10~12V or Dual DC 12-15V 
Potentiometer Spacing: 19mm 
Potentiometer(left to right ): bass control, treble control,
left-right balance control, volume control
 
 
Notice:
 
This is not a finished board. this is KIT only DIY Kit. This is a Kit ,
you need to weld the component by yourself !
DIY kit installation requires some basic electronic production and practical ability,
there is the risk of damage during the process of installing, once the board is powered on,
we are not responsible for the components. thanks for your understanding
 
 
Package Included:
 
 
1 x  LM1036N Fever Volume Control Board Kit For 12V DC/AC Power Supply DIY
 

 

 
 
 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.