ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3
ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3
SKU:012651- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
- Plugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.
- It doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.
- It can charge, discharge, it also has battery protection (overcharge or overdischarge).
- It only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.
- The charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).
- Suitable for all Arduino.
Description:
The mobile power is stacked on the Arduino board and powered via the 5V/GND pin.
We also provide a USB-A output interface that you can use to connect to other devices using a USB cable.
The charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).
When you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.
You can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.
Lithium Battery Model: 16340(not include)
Battery protection(Over charge or Over discharge)
LED indicate(Green means full,Red means charging)
Micro USB port Input
Type-A USB Output
Output 5V
Charging current: 500mA
Discharge current: 1000mA
NOTE:
Be careful of "+" and "-", You should follow the direction of "+""-" on the PCB.
If you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery.
Package include:
1PCS 16340 Battery shield (does not include 16340 battery)
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Customer Reviews
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $6.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $4.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $4.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $4.99{"id":1703118602298,"title":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","handle":"diymore-16340-battery-shield-power-bank-micro-usb-port-type-a-usb-5v-for-arduino","description":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-13T16:28:11+08:00","created_at":"2018-07-13T16:35:06+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","New Products","Shield","UNO R3"],"price":899,"price_min":899,"price_max":899,"available":true,"price_varies":false,"compare_at_price":399,"compare_at_price_min":399,"compare_at_price_max":399,"compare_at_price_varies":false,"variants":[{"id":15871757385786,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012651","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP8266 ESP32 Power Bank Supply Module 16340 Battery Shield for Arduino UNO R3","public_title":null,"options":["Default Title"],"price":899,"weight":33,"compare_at_price":399,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","options":["Title"],"media":[{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330474567,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_1_870.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330605639,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_778.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678330769479,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_2_593.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331064391,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_3_318.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331162695,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_4_779.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331326535,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_6_302.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331490375,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_8_965.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331588679,"position":8,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_12_868.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331785287,"position":9,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_16_999.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678331916359,"position":10,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_5_536.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332047431,"position":11,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_7_182.jpg?v=1588643657","width":1000},{"alt":"16340 Battery Shield Power Bank Micro Usb Port Type-A 5V For Arduino Expansion Module","id":6678332211271,"position":12,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012651_10_451.jpg?v=1588643657","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\u003cstrong\u003eFeature:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003ePlugs into the Arduino UNO R3, then installs the 16340 lithium battery, It becomes a mobile power supply for Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt doesn't need to be powered by a power supply or plugged into a computer. It gets rid of the Arduino adapter's dependencies. It can last about more than ten hours.With it, you can take your work and share it with friends anytime, anywhere.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt can charge, discharge, it also has battery protection (overcharge or overdischarge).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eIt only needs one 16340 lithium battery to work, and you can use two 16340 lithium batteries at the same time to get more lasting power.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSuitable for all Arduino.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe mobile power is stacked on the Arduino board and powered via the 5V\/GND pin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe also provide a USB-A output interface that you can use to connect to other devices using a USB cable.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe charging interface is micro USB, and the charging tool is easily accessible (eg, Android phone adapter).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhen you stop using it, it is recommended that you turn off the power output to allow the mobile power to enter standby mode, saving limited battery power.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eYou can use only one battery, or you can use two 16340 lithium batteries at the same time.When the battery is low, it will prompt you to use the micro USB to charge it.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLithium Battery Model: 16340(not include)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eBattery protection(Over charge or Over discharge)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eLED indicate(Green means full,Red means charging)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMicro USB port Input\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eType-A USB Output\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOutput 5V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCharging current: 500mA\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDischarge current: 1000mA\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eBe careful of \"+\" and \"-\", You should follow the direction of \"+\"\"-\" on the PCB.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you put wrong direction, charging chip will be destroyed. This product does not include 16340 battery. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cbr\u003e\u003cb\u003ePackage include:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1PCS 16340 Battery shield (does not include 16340 battery)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}