I2S MEMS Microphone Breakout Output Module SPH0645LM4H For Cortex M Arduino

Diymore Sph0645 I2S Mems Microphone Breakout Module Output Winder 6Pin For Raspberry Pi For Arduino

I2S MEMS Microphone Breakout Output Module SPH0645LM4H For Cortex M Arduino

SKU:X13416
Regular price $17.98 Sale price $8.99

 

 

 

Listen to the good news - we now have a breakthrough board for the ultra-small I2S MEMS microphones. Like "classic" electret microphones, MEMS microphones can detect sounds and convert them into voltage, but their size is getting smaller. This microphone does not even have an analog output, it is purely digital. I2S is a small, low-cost MEMS microphone, the range is about 50Hz-15KHz, suitable for all common audio recording / detection.
 
For many microcontrollers, one of our analog microphone breakthroughs adds audio input. However, as you use more and more microcontrollers and microcomputers, you will find that you do not have analog input, or you may want to avoid noise that may penetrate the analog microphone system. Once you have passed the 8-bit micros, you will often find an I2S peripheral that can take digital audio data! This is where the I2S microphone breaks.
 
Instead of analog output, there are three digital pins: clock, data and left and right (word select) clock. When connected to a microcontroller / computer, the "I2S host" will drive the clock and word select pins at high frequencies and read the data from the microphone. No analog conversion required!
 
The microphone is a single mono component. You can select whether to leave the left or right channel by connecting the select pin to the power supply or ground. If you need stereo, pick up two microphones! You can set them to stereo by sharing the Clock, WS, and Data lines, but by selecting the ground and selecting High.
 
This I2S MEMS microphone is a bottom transplant, so make sure your bottom hole faces the sound you want to read. This is a 1.6-3.6V maximum device, so it is not used for 5V logic (really unlikely you have a 5V logic device with I2S anyway). Many beginner micro-controller boards do not have I2S, so before attempting to wire, make sure that they support the interface! The microphone is best suited for Cortex M series chips such as Zero, Feather M0 or single board computers such as Raspberry Pi.

 

 

Package incluede :

 

1 x Module

1 x Pin Header

 


 

 

 

 

 


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 

 

Listen to the good news - we now have a breakthrough board for the ultra-small I2S MEMS microphones. Like "classic" electret microphones, MEMS microphones can detect sounds and convert them into voltage, but their size is getting smaller. This microphone does not even have an analog output, it is purely digital. I2S is a small, low-cost MEMS microphone, the range is about 50Hz-15KHz, suitable for all common audio recording / detection.
 
For many microcontrollers, one of our analog microphone breakthroughs adds audio input. However, as you use more and more microcontrollers and microcomputers, you will find that you do not have analog input, or you may want to avoid noise that may penetrate the analog microphone system. Once you have passed the 8-bit micros, you will often find an I2S peripheral that can take digital audio data! This is where the I2S microphone breaks.
 
Instead of analog output, there are three digital pins: clock, data and left and right (word select) clock. When connected to a microcontroller / computer, the "I2S host" will drive the clock and word select pins at high frequencies and read the data from the microphone. No analog conversion required!
 
The microphone is a single mono component. You can select whether to leave the left or right channel by connecting the select pin to the power supply or ground. If you need stereo, pick up two microphones! You can set them to stereo by sharing the Clock, WS, and Data lines, but by selecting the ground and selecting High.
 
This I2S MEMS microphone is a bottom transplant, so make sure your bottom hole faces the sound you want to read. This is a 1.6-3.6V maximum device, so it is not used for 5V logic (really unlikely you have a 5V logic device with I2S anyway). Many beginner micro-controller boards do not have I2S, so before attempting to wire, make sure that they support the interface! The microphone is best suited for Cortex M series chips such as Zero, Feather M0 or single board computers such as Raspberry Pi.

 

 

Package incluede :

 

1 x Module

1 x Pin Header

 


 

 

 

 

 


Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.