WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu
WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu
SKU:040283- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
- Main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / n HT40 Wi-Fi transceiver
- Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip
- Supports Sniffer, Station, softAP and Wi-Fi Direct modes
- UDP continues to throughput by 135 Mbps
- Operating voltage: 3.3V to 7V
Description:
WIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).
Onboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.
Operating voltage: 3.3V to 7V
Operating temperature range: -40 ° C to + 90 ° C
Supports Sniffer, Station, softAP and Wi-Fi Direct modes
Data rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to - 98 dBm
UDP continues to throughput by 135 Mbps
Package Including:
1 * ESP32 development board with OLED
2 * Pin headers
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Customer Reviews
Other Customers also buy:
-
Translation missing: en.products.product.regular_price
$5.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price
$16.00$9.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price
$7.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price
$7.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"} -
Translation missing: en.products.product.regular_price
$47.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"} -
STM32F4 Discovery STM32F407VGT6 Microcontroller 32bit Flash MCU ARM Cortex M4 Core Development BoardTranslation missing: en.products.product.regular_price
$35.99$69.99 On Sale{"id":1678834827322,"title":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","handle":"diymore-wifi-kit-32-esp32-wifi-wireless-with-0-96-inch-oled-display-cp2102-development-board-for-arduino-nodemcu","description":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2018-07-10T15:48:07+08:00","created_at":"2018-07-10T15:53:44+08:00","vendor":"diymore","type":"WiFi Module","tags":["Arduino","Display","ESP32","Kits","OLED","Wireless"],"price":1599,"price_min":1599,"price_max":1599,"available":true,"price_varies":false,"compare_at_price":2050,"compare_at_price_min":2050,"compare_at_price_max":2050,"compare_at_price_varies":false,"variants":[{"id":15473177952314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"040283","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WIFI Kit 32 ESP32 WIFI wireless with 0.96 inch OLED Display CP2102 Development Board for Arduino Nodemcu","public_title":null,"options":["Default Title"],"price":1599,"weight":12,"compare_at_price":2050,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","options":["Title"],"media":[{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303113287,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_404.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303244359,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_1_746.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303637575,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_5_246.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678303768647,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_1_1_721.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304260167,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_2_178.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304555079,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_7_725.jpg?v=1588643134","width":1000},{"alt":"Wifi Kit 32 Esp32 Wireless With 0.96 Inch Oled Display Cp2102 Development Board For Arduino Nodemcu","id":6678304620615,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/040283_3_551.jpg?v=1588643134","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cul class=\"a-unordered-list a-vertical a-spacing-none\"\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eMain chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display,CP2102 USB to serial chip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"a-list-item\"\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan class=\"a-list-item\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWIFI Kit 32 series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, clocked at 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b \/ g \/ n HT40 Wi-Fi transceiver,baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOnboard 32MByte Flash, Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, perfect support for Arduino development environment.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eOperating voltage: 3.3V to 7V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOperating temperature range: -40 ° C to + 90 ° C\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSupports Sniffer, Station, softAP and Wi-Fi Direct modes\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eData rate: 150 Mbps @ 11n HT40,72 Mbps @ 11n HT20,54 Mbps @ 11g, 11 Mbps @ 11b\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eTransmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eReceiver sensitivity up to - 98 dBm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eUDP continues to throughput by 135 Mbps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Including:\u003c\/b\u003e\u003cbr\u003e\u003cspan\u003e1 * ESP32 development board with OLED \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2 * Pin headers \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e"}