EPROM 5V ALTERA FPGA CycloneII EP2C5T144 Minimum System Development Board USB Blaster Mini USB Cable 10Pin JTAG Connection Cable

EPROM 5V ALTERA FPGA CycloneII EP2C5T144 Minimum System Development Board USB Blaster Mini USB Cable 10Pin JTAG Connection Cable

SKU:ZH0999
Regular price $18.97 Sale price $15.99

[USB Blaster Mini USB Cable 10-Pin JTAG Connection Cable]

Feature: Fully compatible with original Altera USB-Blaster. Supported target voltage : 1.0V-5.5V. Support all ALTERA device. CPLD:MAX 3000A.MAX 7000A.MAX 7000B.MAX 7000S.MAX 9000.MAX 9000A and MAX II. FPGA:Stratix.Stratix II.Stratix GX.Cyclone.Cyclone II.Cyclone III.ACEX 1K.APEX II.APEX 20K.APEX 20KE.APEX 20KC.FLEX 10K.FLEX 10KE.FLEX 10KA.FLEX 6000.FLEX 8000.EPCS1.EPCS4.EPCS16.EPCS64EPC1.EPC4.EPC8.EPC16. Support:JTAG, AS, PS Mode. Support NiosII embeded core based debug. Supports Quartus II SignalTap? II Logic Analyzer (for logic analysis). High performance, 6 times faster than ByteBlasterII. USB interface with status and Power LED. Size:5.5cm x 2.8cm x 1.5cm - 2.17inch x 1.1inch x 0.59inch.

[EPROM 5V ALTERA FPGA CycloneII EP2C5T144 Minimum System Development Board]

Note: This board is unsoldered. Buyer should solder it by yourself. Feature: Cyclone II EP2C5T144 chip as the core of the smallest system, the FPGA easily embedded in the actual system Complete the simple logic control, data acquisition, signal processing, mathematical calculations and other functions Core board FPGA chip pin all leads directly to the board into the application board, the board's 5V power supply can be introduced through the outlet can also be introduced through the row array Size: 51.7 * 71.9 mm On-board EP2C5T144 chip. The EPROM chip adopt EPCS4 with 4Mbit. Have power indicator and reset switch. On-board 3 SMD LED, you can do the LED test experiments. All the IO ports and clock pins leads by the pin, through these interfaces can be extended to any memory and peripheral. Support the development of NiosII embedded CPU.

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

[USB Blaster Mini USB Cable 10-Pin JTAG Connection Cable]

Feature: Fully compatible with original Altera USB-Blaster. Supported target voltage : 1.0V-5.5V. Support all ALTERA device. CPLD:MAX 3000A.MAX 7000A.MAX 7000B.MAX 7000S.MAX 9000.MAX 9000A and MAX II. FPGA:Stratix.Stratix II.Stratix GX.Cyclone.Cyclone II.Cyclone III.ACEX 1K.APEX II.APEX 20K.APEX 20KE.APEX 20KC.FLEX 10K.FLEX 10KE.FLEX 10KA.FLEX 6000.FLEX 8000.EPCS1.EPCS4.EPCS16.EPCS64EPC1.EPC4.EPC8.EPC16. Support:JTAG, AS, PS Mode. Support NiosII embeded core based debug. Supports Quartus II SignalTap? II Logic Analyzer (for logic analysis). High performance, 6 times faster than ByteBlasterII. USB interface with status and Power LED. Size:5.5cm x 2.8cm x 1.5cm - 2.17inch x 1.1inch x 0.59inch.

[EPROM 5V ALTERA FPGA CycloneII EP2C5T144 Minimum System Development Board]

Note: This board is unsoldered. Buyer should solder it by yourself. Feature: Cyclone II EP2C5T144 chip as the core of the smallest system, the FPGA easily embedded in the actual system Complete the simple logic control, data acquisition, signal processing, mathematical calculations and other functions Core board FPGA chip pin all leads directly to the board into the application board, the board's 5V power supply can be introduced through the outlet can also be introduced through the row array Size: 51.7 * 71.9 mm On-board EP2C5T144 chip. The EPROM chip adopt EPCS4 with 4Mbit. Have power indicator and reset switch. On-board 3 SMD LED, you can do the LED test experiments. All the IO ports and clock pins leads by the pin, through these interfaces can be extended to any memory and peripheral. Support the development of NiosII embedded CPU.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.