ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266

ESP-M3 ESP8285 Serial Wireless Wi-Fi Transmission Module Compatible with ESP8266

SKU:012462
Regular price $2.99

shipped within one bussiness day

What is ESP8285?
ESP8285 = ESP8266 + 1 m, bearing high temperature 125 ℃ (one for ESP8266 just 85 ℃). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly
The ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory.
The ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM.
The ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance
Especially, the ESP8285 can be used as a Wi-Fi adapter by SPI / SDIO and / or I2C / UART interface, when it is applied to another MCU design

Features:
Ultra-small size
Support serial to Wi-Fi
Wireless Transparent transmission
Long transmission distance with ultra-low power
Having a high temperature of up to 125 ° C, compared to 85 ℃ for ESP8266

Parameters:
  • SOC characteristics
  • Built-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos
  • Built-in protocol tcp / ip
  • Built-in one channel 10-bit high-precision ADC
  • Hanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO
  • Deep sleep current 10uA, the cutoff current is less than 5uA
  • Service, connect and transfer the data packet for 2 ms
  • To consume power less than 1.0 MW (DTIM3), when on stand by status
  • Built-in 1 m bytes for SPI flash memory

Wi-Fi Features:
  • Support 802.11 B / G / N / E / I
  • Station support, soft AP, soft mode AP + sta
  • Support for Wi-Fi Direct (P2P)
  • Support for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration
  • P2P search, P2P Go mode / gc mode and P2P power management
  • WPA / PA2PSK and WPS
  • 802.11 securitycertification: pre-certification and TSN
  • Support 802.11n (2.4 GHz)
  • 802.1 h / RFC1042 Encapsulation of the frame
  • Support seam less roaming
  • Support for remote updates and cloud updates (OTA)
  • Support for Smart config functions (including Android and iOS devices)

Interface Module:
2 * UART
1 * ADC
1 * en
1 * wake pin
1 * hspi
1 * I2C
1 * I2S
More than 10 * gpios
Operating temperature: -40 ℃ - + 125 ℃
Module size: 26.8 mm * 16 mm

Application:
Electronic devices
Smart Power Plug, smart light
Infant monitor
Sensor networks
Security id tags
Wireless location beacon
Home automation
Mesh networks
IP video camera
Portable Electronics
Wireless recognition location
Industrial wireless control
 
Package Included:
1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module
trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
What is ESP8285?
ESP8285 = ESP8266 + 1 m, bearing high temperature 125 ℃ (one for ESP8266 just 85 ℃). More importantly, the code programmed in ESP8266 can be used for ESP8285 intactly
The ESP-M3 encapsulates the high performance ESP8285 chip, which equals the ESP8266 chip plus 1 m of flash memory.
The ESP825 chip is encapsulated by the extended tensilica's L106 32-bit processor, along with SRAM.
The ESP825 has a full and Wi-Fi fuction that can be used alone and alsoused as a slave with other MCU hosters that can start directly from a flash-based. In addition, the built-in high-speed buffer is an allowance for system performance
Especially, the ESP8285 can be used as a Wi-Fi adapter by SPI / SDIO and / or I2C / UART interface, when it is applied to another MCU design

Features:
Ultra-small size
Support serial to Wi-Fi
Wireless Transparent transmission
Long transmission distance with ultra-low power
Having a high temperature of up to 125 ° C, compared to 85 ℃ for ESP8266

Parameters:
  • SOC characteristics
  • Built-in tensilica L106 ultra-low power 32-bit processor, the main frequency supports 80 MHz and160MHz, and rtos
  • Built-in protocol tcp / ip
  • Built-in one channel 10-bit high-precision ADC
  • Hanging interface: hspi, UART, I2C, I2S, IR remote controk, PWM, GPIO
  • Deep sleep current 10uA, the cutoff current is less than 5uA
  • Service, connect and transfer the data packet for 2 ms
  • To consume power less than 1.0 MW (DTIM3), when on stand by status
  • Built-in 1 m bytes for SPI flash memory

Wi-Fi Features:
  • Support 802.11 B / G / N / E / I
  • Station support, soft AP, soft mode AP + sta
  • Support for Wi-Fi Direct (P2P)
  • Support for ccmp (CBC-MAC, calculation mode), TKIP (mic, RC4), WAPI (SMS4), WEP (RC4), CRC, etc., for hardware acceleration
  • P2P search, P2P Go mode / gc mode and P2P power management
  • WPA / PA2PSK and WPS
  • 802.11 securitycertification: pre-certification and TSN
  • Support 802.11n (2.4 GHz)
  • 802.1 h / RFC1042 Encapsulation of the frame
  • Support seam less roaming
  • Support for remote updates and cloud updates (OTA)
  • Support for Smart config functions (including Android and iOS devices)

Interface Module:
2 * UART
1 * ADC
1 * en
1 * wake pin
1 * hspi
1 * I2C
1 * I2S
More than 10 * gpios
Operating temperature: -40 ℃ - + 125 ℃
Module size: 26.8 mm * 16 mm

Application:
Electronic devices
Smart Power Plug, smart light
Infant monitor
Sensor networks
Security id tags
Wireless location beacon
Home automation
Mesh networks
IP video camera
Portable Electronics
Wireless recognition location
Industrial wireless control
 
Package Included:
1*ESP-M3 ESP8285 Serial Wireless Wi-Fi Module

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Free Shipping
All order over $50.00
Money Come Back
All order over $50.00
Member Discount
All order over $50.00
24/7 Support
All order over $50.00
Gift Voucher
All order over $50.00