Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini
Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini
SKU:010102
Regular price
$9.99
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Description:
- 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx
- Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.
- There is a voltage regulator on board so it can accept voltage up to 12VDC.
- If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
- This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.
- We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED
- Dimensions: 1.3x0.7"
- ATMega 32U4 running at 5V/16MHz
- Supported under Arduino IDE v1.0.1
- On-Board micro-USB connector for programming
- 4 x 10-bit ADC pins
- 12 x Digital I/Os (5 are PWM capable)
- Rx and Tx Hardware Serial Connections
- The Smallest Arduino-Compatible Board Yet
- 1*Leonardo Pro Micro ATmega32U4 Board
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
Translation missing: en.products.product.regular_price $7.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
Translation missing: en.products.product.regular_price $9.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}
-
Translation missing: en.products.product.regular_price $8.99{"id":1826450440250,"title":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","handle":"leonardo-pro-micro-atmega32u4-arduino-bootloader-ide-1-0-3-replace-pro-mini","description":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2018-08-16T14:47:49+08:00","created_at":"2018-08-16T14:49:21+08:00","vendor":"diymore","type":"Expansion Shield Module","tags":["Arduino","Pro Micro","Pro Mini","Shield"],"price":999,"price_min":999,"price_max":999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17861677547578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"010102","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Leonardo Pro Micro ATmega32U4 Arduino Bootloader IDE 1.0.3 Replace Pro Mini","public_title":null,"options":["Default Title"],"price":999,"weight":4,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","options":["Title"],"media":[{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698885191,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_7_385.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698917959,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_1_226.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678698950727,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_2_916.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699081799,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_3_989.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699180103,"position":5,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_4_964.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699278407,"position":6,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_6_818.jpg?v=1588652716","width":1000},{"alt":"Leonardo Pro Micro Atmega32U4 Arduino Bootloader Ide 1.0.3 Replace Mini Expansion Shield Module","id":6678699475015,"position":7,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/010102_5_839.jpg?v=1588652716","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx\u003c\/li\u003e\n\u003cli\u003eRunning at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere.\u003c\/li\u003e\n\u003cli\u003eThere is a voltage regulator on board so it can accept voltage up to 12VDC.\u003c\/li\u003e\n\u003cli\u003eIf you're supplying unregulated power to the board, be sure to connect to the \"RAW\" pin on not VCC.\u003c\/li\u003e\n\u003cli\u003eThis latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled.\u003c\/li\u003e\n\u003cli\u003eWe've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x0.7\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eATMega 32U4 running at 5V\/16MHz\u003c\/li\u003e\n\u003cli\u003eSupported under Arduino IDE v1.0.1\u003c\/li\u003e\n\u003cli\u003eOn-Board micro-USB connector for programming\u003c\/li\u003e\n\u003cli\u003e4 x 10-bit ADC pins\u003c\/li\u003e\n\u003cli\u003e12 x Digital I\/Os (5 are PWM capable)\u003c\/li\u003e\n\u003cli\u003eRx and Tx Hardware Serial Connections\u003c\/li\u003e\n\u003cli\u003eThe Smallest Arduino-Compatible Board Yet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e1*Leonardo Pro Micro ATmega32U4 Board\u003c\/li\u003e\n\u003c\/ul\u003e"}