MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino
MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino
SKU:011467- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Overview:
1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.
2.This protuct does everything for you, and can be easily interfaced with any microcontroller,
even one without an analog input.
3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any
breadboard or perfboard).
Specification:
1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero
2. SPI interfaces, high-speed transmission
3. the input voltage is 3-5v DC
4. direct digital output temperature value, no amplifiers, no ADC
5. 14-bit resolution, 0.25 degree temperature accuracy
Note:
1.Works with any K type thermocouple
2 K thermocouples have about ±2°C to ±6°C accuracy
4.Internal temperature reading
5.3 to 5v power supply and logic level compliant!
6.SPI data output requires any 3 digital I/O pins.
The MAX31855 GND and T- cannot be connected because there is a control switch inside.
Packing Included:
1 x MAX31855 K Type Thermocouple Breakout Board
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $11.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $6.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $3.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $4.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}
-
Translation missing: en.products.product.regular_price $5.99{"id":1822139121722,"title":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","handle":"max31855-k-type-thermocouple-breakout-board-temperature-200c-to-1350-c-for-arduino","description":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e","published_at":"2018-08-15T17:03:26+08:00","created_at":"2018-08-15T17:06:28+08:00","vendor":"diymore","type":"Adapter Module","tags":["Amplifier","Arduino"],"price":599,"price_min":599,"price_max":599,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17817118933050,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"011467","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MAX31855 K Type Thermocouple Breakout Board Temperature -200C to +1350°C for Arduino","public_title":null,"options":["Default Title"],"price":599,"weight":3,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","options":["Title"],"media":[{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682566727,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0002_773.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682665031,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0003_907.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682730567,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0007_239.jpg?v=1588652170","width":1000},{"alt":"Max31855 K Type Thermocouple Breakout Board Temperature -200C To +1350°C For Arduino Adapter Module","id":6678682861639,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/DSC_0009_688.jpg?v=1588652170","width":1000}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003e1.Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference.\u003cbr\u003e2.This protuct does everything for you, and can be easily interfaced with any microcontroller,\u003cbr\u003eeven one without an analog input.\u003cbr\u003e3.Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any\u003cbr\u003ebreadboard or perfboard).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003e1. measurement temperature range: minus 200 degrees Celsius to 1350 degrees Celsius above zero\u003cbr\u003e2. SPI interfaces, high-speed transmission\u003cbr\u003e3. the input voltage is 3-5v DC\u003cbr\u003e4. direct digital output temperature value, no amplifiers, no ADC\u003cbr\u003e5. 14-bit resolution, 0.25 degree temperature accuracy\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1.Works with any K type thermocouple\u003cbr\u003e2 K thermocouples have about ±2°C to ±6°C accuracy\u003cbr\u003e4.Internal temperature reading\u003cbr\u003e5.3 to 5v power supply and logic level compliant!\u003cbr\u003e6.SPI data output requires any 3 digital I\/O pins.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe MAX31855 GND and T- cannot be connected because there is a control switch inside.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePacking Included:\u003c\/strong\u003e\u003cbr\u003e1 x MAX31855 K Type Thermocouple Breakout Board\u003c\/p\u003e"}