QRP manual weather adjustment kit with standing wave indication

SKU:XF0075

$16.99

Product manual:

The antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.
This tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY

Instructions:

Dial the Key to standing wave test, connect the transceiver and antenna
Press the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest
Turn the Key to normal use, and the antenna tuning is completed.

Precautions:

When punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole
If you need to connect to the M head, you can change the Q9 to the M seat by yourself
Fix the LED with hot melt glue or glue
In actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.
When performing a standing wave test, the input power must not exceed 5W! Don’t test for long

Quantity

guaranteeQuality checked
Special gift cardsSpecial gift cards
Free return Within 60 days
Consultancy86-0755-85201155

Product manual:

The antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.
This tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY

Instructions:

Dial the Key to standing wave test, connect the transceiver and antenna
Press the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest
Turn the Key to normal use, and the antenna tuning is completed.

Precautions:

When punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole
If you need to connect to the M head, you can change the Q9 to the M seat by yourself
Fix the LED with hot melt glue or glue
In actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.
When performing a standing wave test, the input power must not exceed 5W! Don’t test for long

Manual

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.

Picking up at the store

Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.

Delivery

Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

$2 Wire 0.56\" Voltmeter LED Tube Digital DC4.5/4.7/5V-30V Voltage Panel Meter$

2 Wire 0.56\" Voltmeter LED Tube Digital DC4.5/4.7/5V-30V Voltage Panel Meter

Translation missing: en.products.product.regular_price $5.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}
2.42" inch OLED Display RGB SSD1309 12864 SPI Serial Port for Arduino C51

Translation missing: en.products.product.regular_price $23.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}
18650 Battery Shield V8 Mobile Power Bank 3V/5V for Arduino ESP32 ESP8266

Translation missing: en.products.product.regular_price $5.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}
USB Charger Doctor Capacity Tester LCD Display Current Voltage Detector Meter

Translation missing: en.products.product.regular_price $7.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}
ESP32 ESP8266 4x 18650 Battery USB Power Bank Shield Holder V9 3V/5V

Translation missing: en.products.product.regular_price $9.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}
10cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino

Translation missing: en.products.product.regular_price $5.99
{"id":4889213501511,"title":"QRP manual weather adjustment kit with standing wave indication","handle":"qrp-manual-weather-adjustment-kit-with-standing-wave-indication","description":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2020-10-20T14:36:55+08:00","created_at":"2020-10-20T14:36:53+08:00","vendor":"DIYMORE","type":"","tags":[],"price":1699,"price_min":1699,"price_max":1699,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32627637452871,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"XF0075","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"QRP manual weather adjustment kit with standing wave indication","public_title":null,"options":["Default Title"],"price":1699,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","options":["Title"],"media":[{"alt":null,"id":7616963805255,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/XF0075_2.png?v=1603252123","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eProduct manual:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eThe antenna can be adjusted by adding appropriate inductance or capacitance to the original non-resonant antenna to make the radio work normally. It is possible to correct the antenna that was originally resonant, but due to external influences, the SWR of the antenna that has changed. It can be used as a band-pass filter to reduce unnecessary out-of-band radiation when transmitting, and to reduce out-of-band cross-modulation and interference when receiving.\u003c\/li\u003e\n\u003cli\u003eThis tuning kit comes with standing wave indication, adopts T-type topology network, works in shortwave 1-30MHz, can withstand 15W transmission power, and the tuning range is about 40-300 ohms, which can be very convenient for QRP communication to ensure high efficiency Wireless communication, but also allows you to fully enjoy the fun of DIY\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eInstructions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eDial the Key to standing wave test, connect the transceiver and antenna\u003c\/li\u003e\n\u003cli\u003ePress the power button to transmit (SSB machine makes a call), repeatedly adjust the multi-switch and two knobs, and stop tuning when the brightness of the red LED is lowest\u003c\/li\u003e\n\u003cli\u003eTurn the Key to normal use, and the antenna tuning is completed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003ePrecautions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eWhen punching the Q9 seat, be careful not to punch too much, you need to carefully repair the straight edge inside the hole\u003c\/li\u003e\n\u003cli\u003eIf you need to connect to the M head, you can change the Q9 to the M seat by yourself\u003c\/li\u003e\n\u003cli\u003eFix the LED with hot melt glue or glue\u003c\/li\u003e\n\u003cli\u003eIn actual use, the current tuning range is about 40-300 ohms. If you need other parameters, please adjust the number of turns of the inductor yourself.\u003c\/li\u003e\n\u003cli\u003eWhen performing a standing wave test, the input power must not exceed 5W! Don’t test for long\u003c\/li\u003e\n\u003c\/ul\u003e"}