TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board
TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board
SKU:012731
Regular price
$4.99
![]()
- guaranteeQuality checked
- Special gift cardsSpecial gift cards
- Free return Within 60 days
- Consultancy86-0755-85201155
Description:
- 0.3A, 0.5A, 0.8A current charging
- Adopt micro USB interface, convenient to use
- Charging status LED indicator lamp: red lamp charging; green lamp fully charged
- Suitable for 18650 lithium non-protection board
- Working temperature:-25~85℃
- Three charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A
- The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board
Purchasing & Delivery
Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Other Customers also buy:
-
Translation missing: en.products.product.regular_price $5.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $5.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $7.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $9.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $5.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"} -
Translation missing: en.products.product.regular_price $8.99{"id":4792249843783,"title":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","handle":"tec4056-4-2v-18650-lithium-battery-charger-module-for-non-protection-board","description":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","published_at":"2020-08-14T11:19:44+08:00","created_at":"2020-08-14T11:19:42+08:00","vendor":"DIYMORE","type":"","tags":[],"price":499,"price_min":499,"price_max":499,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":32508214509639,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"012731","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board","public_title":null,"options":["Default Title"],"price":499,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"],"featured_image":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","options":["Title"],"media":[{"alt":null,"id":7280836411463,"position":1,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_1.jpg?v=1597375184","width":800},{"alt":null,"id":7280836444231,"position":2,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_4.jpg?v=1597375184","width":800},{"alt":null,"id":7280836476999,"position":3,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_3.jpg?v=1597375184","width":800},{"alt":null,"id":7280836509767,"position":4,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_2.jpg?v=1597375184","width":800},{"alt":null,"id":7280836542535,"position":5,"preview_image":{"aspect_ratio":1.0,"height":800,"width":800,"src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184"},"aspect_ratio":1.0,"height":800,"media_type":"image","src":"\/\/www.diymore.cc\/cdn\/shop\/products\/012731_5.jpg?v=1597375184","width":800}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cdiv\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eDescription:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e 0.3A, 0.5A, 0.8A current charging\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eAdopt micro USB interface, convenient to use\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eCharging status LED indicator lamp: red lamp charging; green lamp fully charged\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eSuitable for 18650 lithium non-protection board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eWorking temperature:-25~85℃\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003eThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan lang=\"en\"\u003e\u003cspan lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan id=\"result_box\" lang=\"en\"\u003e\u003cspan title=\"Description:\n1\u0026gt;. 0.3A, 0.5A, 0.8A current charging\n2\u0026gt;. Adopt micro USB interface, convenient to use\n3\u0026gt;. Charging status LED indicator lamp: red lamp charging; green lamp fully charged\n4\u0026gt;. Suitable for 18650 lithium non-protection board\n5\u0026gt;. Working temperature:-25~85℃\n\nFeatures:\nThree charging current (0.3A, 0.5A, 0.8A) can be set via external resistor; two resistors (0.3A, 0.5A) is current setting resistor; factory set defaults 0.8A, users can remove the resistor to change the current. For example, after removing 0.3A resistor and keeping 0.5A resistor, then the charging current is 0.5A\n\nNote: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.\n \nPackage Included:\n1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\"\u003e1PC*TEC4056 4.2V 18650 Lithium Battery Charger Module for Non-protection Board\u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e"}
