12V / 24V 7A 160W Dual DC Motor Driver Module Board H bridge L298 Logic 160W 2 Dual Channel 2CH Optocoupler Isolation 2 Way

12V / 24V 7A 160W Dual DC Motor Driver Module Board H bridge L298 Logic 160W 2 Dual Channel 2CH Optocoupler Isolation 2 Way

SKU:012036
Regular price $10.99


Features:
1, the dual H-bridge;
2, rated 7A / Road
3, optocoupler isolation;
4, undervoltage protection;
5, compact size.
Features:
◆ extremely small size, only 5.5cm × 5.5cm
◆ Support voltage 7V ~ 24V, undervoltage protection
◆ Dual motor interface, each rated output current 7A
◆ L298 similar control logic, each supported by three-wire control is enabled, reversing and braking
◆ enable signal to an external PWM, reversing limit switch control signal can be connected in series
◆ control signal sink drivers, support the vast majority of single-chip direct drive
◆ Use optocoupler isolation for all control signals
◆ electrostatic discharge circuit
Principle Overview:
The H-bridge module gate circuit, motor reversing combination with MOS transistors, braking and speed control. Both have similar large output current L298 flexible logic control signal.
Interference approach: control signal optocoupler isolation, power spike voltage suppression.
Control signal logic: L298 using gates to achieve a similar control logic.
H-bridge Method: Use P, N complementary MOS transistors to achieve the H-bridge.
Power voltage protection: Use reset chip undervoltage protection.
Technical parameters:
Input voltage range: DC 6.5V ~ 27V
Rated input voltage: DC 12V / 24V
Output channels: 2-way
Rated output current per channel: 7A
Peak output current per channel: 50A
Each rated output power: 84W (12V supply) 168W (24V power supply)
The control signal voltage: 3 ~ 6.5V
Each control signal current: 3 ~ 11mA
The minimum effective PWM pulse width: 5us
Working temperature: -25 ° ~ 80 °
Dimensions: 5.5cm × 5.5cm × 2.0cm
Size of 5.5cm × 5.5cm × 2.0cm. Installation hole diameter is 3mm, suggested the use of M3 screws to fix.
Note that when you install, do not let the back of a short circuit, you can add insulation pad or use Tongzhu raise the board.
Package Included:
1 x 12V/24V 7A 160W *2 L298 H-bridge DC Motor Drive Module


trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


Features:
1, the dual H-bridge;
2, rated 7A / Road
3, optocoupler isolation;
4, undervoltage protection;
5, compact size.
Features:
◆ extremely small size, only 5.5cm × 5.5cm
◆ Support voltage 7V ~ 24V, undervoltage protection
◆ Dual motor interface, each rated output current 7A
◆ L298 similar control logic, each supported by three-wire control is enabled, reversing and braking
◆ enable signal to an external PWM, reversing limit switch control signal can be connected in series
◆ control signal sink drivers, support the vast majority of single-chip direct drive
◆ Use optocoupler isolation for all control signals
◆ electrostatic discharge circuit
Principle Overview:
The H-bridge module gate circuit, motor reversing combination with MOS transistors, braking and speed control. Both have similar large output current L298 flexible logic control signal.
Interference approach: control signal optocoupler isolation, power spike voltage suppression.
Control signal logic: L298 using gates to achieve a similar control logic.
H-bridge Method: Use P, N complementary MOS transistors to achieve the H-bridge.
Power voltage protection: Use reset chip undervoltage protection.
Technical parameters:
Input voltage range: DC 6.5V ~ 27V
Rated input voltage: DC 12V / 24V
Output channels: 2-way
Rated output current per channel: 7A
Peak output current per channel: 50A
Each rated output power: 84W (12V supply) 168W (24V power supply)
The control signal voltage: 3 ~ 6.5V
Each control signal current: 3 ~ 11mA
The minimum effective PWM pulse width: 5us
Working temperature: -25 ° ~ 80 °
Dimensions: 5.5cm × 5.5cm × 2.0cm
Size of 5.5cm × 5.5cm × 2.0cm. Installation hole diameter is 3mm, suggested the use of M3 screws to fix.
Note that when you install, do not let the back of a short circuit, you can add insulation pad or use Tongzhu raise the board.
Package Included:
1 x 12V/24V 7A 160W *2 L298 H-bridge DC Motor Drive Module


Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.