5PIN/9PIN JoyStick Breakout Module Shield for PS2 Joystick Game Controller For Arduino Two way Rocker 10K Resistor

5PIN/9PIN JoyStick Breakout Module Shield for PS2 Joystick Game Controller For Arduino Two way Rocker 10K Resistor

SKU:010595
Regular price $5.99

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

White

This is a breakout module for Playstation2 analog joystick .
There are 5 pins on board: VCC, GND, X, Y and Button. Connect the module with 5V power suppy with VCC and GND, you can read out the joystick status by X,Y and button pins.
When using the 5V power supply, the default analog output for X,Y is 2.5V. With the direction of the arrow, the voltage up to 5V, and the opposite direction down to 0V.
5Pin
for PS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.
Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; press the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.
Package Included:
1 x 5 Pin JoyStick Breakout Module Shield for PS2 Joystick Game Controller

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

123

010595 (1)010595 (4)010595 (8)

010594 (2)010594 (3)

HTB1hs.8XfvsK1RjSspdq6AZepXaz

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

White

This is a breakout module for Playstation2 analog joystick .
There are 5 pins on board: VCC, GND, X, Y and Button. Connect the module with 5V power suppy with VCC and GND, you can read out the joystick status by X,Y and button pins.
When using the 5V power supply, the default analog output for X,Y is 2.5V. With the direction of the arrow, the voltage up to 5V, and the opposite direction down to 0V.
5Pin
for PS2 joystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.
Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, the readout voltage values with increasing, up to 5V; press the arrow in the opposite direction, the readout voltage reduction , a minimum of 0V.
Package Included:
1 x 5 Pin JoyStick Breakout Module Shield for PS2 Joystick Game Controller

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

123

010595 (1)010595 (4)010595 (8)

010594 (2)010594 (3)

HTB1hs.8XfvsK1RjSspdq6AZepXaz

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.