Weighing Sensor AD Module Dual channel 24 bit A/D Conversion HX711 Shieding Weight Sensor Module

Weighing Sensor AD Module Dual channel 24 bit A/D Conversion HX711 Shieding Weight Sensor Module

SKU:010005
Regular price $2.50 Sale price $1.89

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

Features:
Voltage :4.8-5 .5 v
Current: 1.6mA
Dimensions: 1.7cm * 2.9cm * 0.4cm
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
With metal shielding , Strong anti-interference ability.
Two selectable differential inputs.
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
Automatic power on reset circuit.
simple digital control and serial communication : All are controlled by the input pin , the chip registers without programming.
selectable output data rate of 10Hz or 80Hz.
simultaneous rejection of 50Hz and 60Hz power interference.
Note: Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol 
Package included:
1 x Dual 24-bit Force Module Converter AD Module for Body Load Cell Weigh Sensor

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

010005 (1)010005 (2)010005 (3)010005 (4)010005 (5)010005 (7)010005 (8)010005 (9)

HTB1CoFQi_TI8KJjSsphq6AFppXax

HTB1hs.8XfvsK1RjSspdq6AZepXaz

8132

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

HTB1ZYSui4PI8KJjSspoq6x6MFXaU

Features:
Voltage :4.8-5 .5 v
Current: 1.6mA
Dimensions: 1.7cm * 2.9cm * 0.4cm
Disconnect J1 output rate 80hz, Connect J1 output rate 10hz
With metal shielding , Strong anti-interference ability.
Two selectable differential inputs.
On-chip low-noise programmable amplifier , selectable gain of 32, 64 and 128.
On-chip voltage regulator circuit can provide power directly to the external sensor and the chip A / D converter.
On-chip clock oscillator requires no external components , if necessary, can also use an external crystal or clock.
Automatic power on reset circuit.
simple digital control and serial communication : All are controlled by the input pin , the chip registers without programming.
selectable output data rate of 10Hz or 80Hz.
simultaneous rejection of 50Hz and 60Hz power interference.
Note: Module's DO-port, CK-port connect with single-chip, just a two-wire serial of data line and a clock line, not 232 serial protocol of computer, nor is I2C, SPI protocol 
Package included:
1 x Dual 24-bit Force Module Converter AD Module for Body Load Cell Weigh Sensor

HTB1jCuMiY_I8KJjy1Xaq6zsxpXaS

010005 (1)010005 (2)010005 (3)010005 (4)010005 (5)010005 (7)010005 (8)010005 (9)

HTB1CoFQi_TI8KJjSsphq6AFppXax

HTB1hs.8XfvsK1RjSspdq6AZepXaz

8132

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.