Pro Micro ATmega32U4 3.3V 16M 16MHz Replace ATmega328 For Arduino Pro Mini With 2 Row Pin Header For Leonardo Mini Usb Interface

Pro Micro ATmega32U4 3.3V 16M 16MHz Replace ATmega328 For Arduino Pro Mini With 2 Row Pin Header For Leonardo Mini Usb Interface

SKU:010891
Regular price $6.99


 
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.
The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
 
 
This tiny little board does all of the neat-o for Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins,
12 DIOs as well as hardware serial connections Rx and Tx.
Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite for Arduino compatible
boards but this little guy can go just about anywhere. There is a voltage regulator on board so
it can accept voltage up to 12VDC. If you're supplying unregulated power to the board,
be sure to connect to the "RAW" pin on not VCC.
 
This latest revision corrects the silk error from the last version of the board so
that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit
and corrected the RX and TX LED circuit.
Dimensions: 1.3x0.7"
 
 
Features:
 
 
ATMega 32U4 running at 3.3V/8MHz
Supported under  For Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest  For Arduino Compatible Board Yet!
 
 
Package Included:
 
1PCS * Leonardo Pro Micro ATmega32U4 8MHz 3.3V Replace ATmega328 Pro Mini For Arduino

 

 

 

 

 

 

  

 

 

 

 

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


 
The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board.
The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface.
 
 
This tiny little board does all of the neat-o for Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins,
12 DIOs as well as hardware serial connections Rx and Tx.
Running at 8MHz and 3.3V, this board will remind you a lot of your other favorite for Arduino compatible
boards but this little guy can go just about anywhere. There is a voltage regulator on board so
it can accept voltage up to 12VDC. If you're supplying unregulated power to the board,
be sure to connect to the "RAW" pin on not VCC.
 
This latest revision corrects the silk error from the last version of the board so
that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit
and corrected the RX and TX LED circuit.
Dimensions: 1.3x0.7"
 
 
Features:
 
 
ATMega 32U4 running at 3.3V/8MHz
Supported under  For Arduino IDE v1.0.1
On-Board micro-USB connector for programming
4 x 10-bit ADC pins
12 x Digital I/Os (5 are PWM capable)
Rx and Tx Hardware Serial Connections
Our Smallest  For Arduino Compatible Board Yet!
 
 
Package Included:
 
1PCS * Leonardo Pro Micro ATmega32U4 8MHz 3.3V Replace ATmega328 Pro Mini For Arduino

 

 

 

 

 

 

  

 

 

 

 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.