150W 50ohm DC 3GHz 150N50F RF Termination Microwave Resistor Dummy Load RFP Copper

150W 50ohm DC 3GHz 150N50F RF Termination Microwave Resistor Dummy Load RFP Copper

SKU:140081
Regular price $4.99


Description:
The G150N50W4E is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO).
The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The high power handling makes the part ideal for terminating circulators and for use in
power combiners. The termination is also RoHS compliant!
Features:
RoHS Compliant
150 Watts
DC - 3.0 GHz
AlN Ceramic
Non-Nichrome Resistive Element
Low V SWR
100% Tested
Specifications:
Resistive Element :Thick Film
Substrate :AlN Ceramic
Mounting Flange : Nickel Plated Copper
Operating Temperature:-50 to +150°C (see de rating chart)
Tolerance is :±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches
Electrical Specifications:
Resistance Value: 50 Ohms, ±2%
Power: 150 Watts
Frequency Range: DC - 3.0 GHz
Return Loss:25dB DC - 2.0 GHz 20dB DC - 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Package include:
1 x DC-3GHz RF Termination Microwave Resistor Dummy Load RFP 150N50F 250W 50Ω

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155


Description:
The G150N50W4E is high performance Aluminum Nitride (AlN) flange mount termination intended as a cost competitive alternative to Beryllium Oxide (BeO).
The termination is well suited to all cellular frequency bands such as; AMPS, GSM, DCS, PCS, PHS and UMTS.
The high power handling makes the part ideal for terminating circulators and for use in
power combiners. The termination is also RoHS compliant!
Features:
RoHS Compliant
150 Watts
DC - 3.0 GHz
AlN Ceramic
Non-Nichrome Resistive Element
Low V SWR
100% Tested
Specifications:
Resistive Element :Thick Film
Substrate :AlN Ceramic
Mounting Flange : Nickel Plated Copper
Operating Temperature:-50 to +150°C (see de rating chart)
Tolerance is :±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches
Electrical Specifications:
Resistance Value: 50 Ohms, ±2%
Power: 150 Watts
Frequency Range: DC - 3.0 GHz
Return Loss:25dB DC - 2.0 GHz 20dB DC - 3.0 GHz
Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change.
Package include:
1 x DC-3GHz RF Termination Microwave Resistor Dummy Load RFP 150N50F 250W 50Ω

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.