FT232RL USB to TTL MWC Serial FTDI Adapter Moudle For 3.3V/5V Nano Anduino

Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For

FT232RL USB to TTL MWC Serial FTDI Adapter Moudle For 3.3V/5V Nano Anduino

SKU:011971
$6.99

Feature:
It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work for Arduino and cloned for 5V for Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any for Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with for Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of for Arduino development and increase ease of use (the auto-reset feature rocks!). For Arduino Pro boards and For LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Package Included:
1 x FTDI FT232 USB to TTL Serial 6 PIN 5V Module Breakout Board for Arduino

011971 (2)011971 (3)011971 (8)011971 (7)011971 (1)011971 (4)

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

Feature:
It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work for Arduino and cloned for 5V for Arduino boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any for Arduino board that has the reset pin brought out to a 6-pin connector.
The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with for Arduino target.
This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.
This board was designed to decrease the cost of for Arduino development and increase ease of use (the auto-reset feature rocks!). For Arduino Pro boards and For LilyPads use this type of connector.
One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V.
Package Included:
1 x FTDI FT232 USB to TTL Serial 6 PIN 5V Module Breakout Board for Arduino

011971 (2)011971 (3)011971 (8)011971 (7)011971 (1)011971 (4)

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For 10Cm 40Pin Male To Male/ M-F/f-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit For
    10cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino
    $5.99
  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For 120Pcs Multicolored 40Pin Male To Female Breadboard Jumper Wires Ribbon Cables Kit Tools
    10/20CM Multi Dupont Male to Female Breadboard Jumper Wire Raspberry Pi Arduino
    $7.99
  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For 20Cm 40Pin Male To Male/ M-F/f-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit For
    20cm 40pin Male to Male/ M-F/F-F Wire Jumper Breadboard Multicolored Dupont Ribbon Cables Kit for Arduino
    $5.99
  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For 100Pcs 24Awg Tin-Plated Breadboard Pcb Fly Jumper Conductor Wires 1007-24Awg Electrical Cable Tools
    100PCS 24AWG Tin-Plated Breadboard PCB Fly Jumper Conductor Wires 1007-24AWG Electrical Cable
    $4.99
  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For 140Pcs Retardant 2:1 Polyolefin Heat Shrink Tubing Tube Kit Sleeve 5 Size 7Color Tools
    140PCS Retardant 2:1 Polyolefin Heat Shrink Tubing Tube Kit Sleeve 5 Size 7Color
    $6.99
  • Diymore Mwc Ftdi Ft232Rl Basic Breakout Board Mini Usb To Ttl Serial Module 5V Programmer For Mb 102 Mb102 Micro Mini Usb Solderless Breadboard Bread Borad Power Supply For Arduino Dc 3.3V 5V
    MB102 Micro Mini USB Solderless BreadBoard Bread Borad Power Supply For Arduino DC 3.3V 5V Module DIY KIT
    $4.99