I.5 inch 128X128 RGB OLED Screen Display Module SSD1351 SPI I2C IIC for Arduino Raspberry Pi STM32

I.5 inch 128X128 RGB OLED Screen Display Module SSD1351 SPI I2C IIC for Arduino Raspberry Pi STM32

SKU:X30637
Regular price $16.99

 

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
 
Features:
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
 
Specifications:
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI
Display color: RGB, 65K colors
Resolution: 128x128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
 
Interface:
Port    Description
VCC     Power (3.3~5V input)
GND     Ground
DIN     Data input
CLK     Clock data input
CS      Chip selection, low active
DC      4-wire SPI: Data/Command selection (high for data, low for command)
        3-wire SPI: Connects to GND, keeps low
RST     Reset, low active
 
 
There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
      BS     DC
4-wire SPI     0     DC
3-wire SPI     1     Connects to GND
 
Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable
 

 

 

 

 

  

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface.
 
Features:
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
 
Specifications:
Driver: SSD1351
Interface: 4-wire SPI, 3-wire SPI
Display color: RGB, 65K colors
Resolution: 128x128
Viewing angle: >160°
Operating voltage: 3.3V / 5V
Dimension: 44.5 x 37 (mm)
 
Interface:
Port    Description
VCC     Power (3.3~5V input)
GND     Ground
DIN     Data input
CLK     Clock data input
CS      Chip selection, low active
DC      4-wire SPI: Data/Command selection (high for data, low for command)
        3-wire SPI: Connects to GND, keeps low
RST     Reset, low active
 
 
There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI:
      BS     DC
4-wire SPI     0     DC
3-wire SPI     1     Connects to GND
 
Package Includes:
1 X 1.5inch OLED Display Module
1 X PH2.0 7P dupond cable
 

 

 

 

 

  

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.