W1209 LED Digital Thermostat Controller Temperature Temp Control Switch Module Board 12V DC -50-110°C with Waterproof Sensor Probe

W1209 LED Digital Thermostat Controller Temperature Temp Control Switch Module Board 12V DC -50-110°C with Waterproof Sensor Probe

SKU:010617
Regular price $2.90

shipped within one bussiness day

  • Wide temperature control range: -50 to 110℃(-58℉-230℉);
  • High accuracy: 0.1℃
  • With waterproof sensitive NTC (10K 0.5%) sensor probe as the measuring input.
  • Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected
  • Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P5,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return
  • Controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads

Specifications:
Temperature range :-50-110 ℃
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
Refresh rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay 
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%,Sensor Probe Length:1m/39.37inch
Dimensions: 1.89X1.57 inch.

How to use:
P0 :Cooling/Heating; Range: C/H; Default: C
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
P2 :Highest Setting Limit; Range:110; Default: 110
P3: Lowest setting Limit; Range:-50; Default: -50
P4 :Temperature Correction; Range:-7-7℃; Default: 0℃
P5: Delay Start Time; Range:0-10 Minute; Default: 0

When the Thermostat is power off, long press "- or +", you can restore the factory settings Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature
Press the SET button, the display flashes the temperature
Press - to set the desired temperature
After setting press SET to confirm return
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

Parameter Function:
Long press SET 5 seconds to enter the main menu settings, press the - toggle P0 ... P5 long press SET or 10 seconds of no key activity confirmed their return to the controller.

Package included:
1x Temperature control switch

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155
  • Wide temperature control range: -50 to 110℃(-58℉-230℉);
  • High accuracy: 0.1℃
  • With waterproof sensitive NTC (10K 0.5%) sensor probe as the measuring input.
  • Digital LED Tubes: "LL" indicates sensor open, "HH" indicates overrange, the relay will be forcibly disconnected
  • Long press the "SET" button to enter the main menu settings, press " + or - " to switching between P0-P5,then long press "SET" or 10 seconds without keystrokes to confirm the setting and return
  • Controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads

Specifications:
Temperature range :-50-110 ℃
Temperature control mode: ON / OFF
Resolution:When temperature is 0.1℃, the resolution is -9.9~99.9, other temperature segment is 1℃
Control accuracy: 0.1 ℃
Hysteresis accuracy: 0.1℃
Refresh rate: 0.5S
High temperature protection: 0-110℃
Supply voltage: DC 12V
Static current: ≤ 35MA, attract current ≤ 65MA
Output voltage: DC 12V
Output power: 20A relay 
Measurement input: NTC (10K 0.5%) Waterproof Sensor
Environmental requirements: -10 ~ 60 ℃ ,Humidity 20% -85%,Sensor Probe Length:1m/39.37inch
Dimensions: 1.89X1.57 inch.

How to use:
P0 :Cooling/Heating; Range: C/H; Default: C
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
P2 :Highest Setting Limit; Range:110; Default: 110
P3: Lowest setting Limit; Range:-50; Default: -50
P4 :Temperature Correction; Range:-7-7℃; Default: 0℃
P5: Delay Start Time; Range:0-10 Minute; Default: 0

When the Thermostat is power off, long press "- or +", you can restore the factory settings Connect the power supply and the load, you can supply to the controller, Is displayed as a measured temperature
Press the SET button, the display flashes the temperature
Press - to set the desired temperature
After setting press SET to confirm return
The controller automatically performs the relay by setting off!
Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.
LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay.

Parameter Function:
Long press SET 5 seconds to enter the main menu settings, press the - toggle P0 ... P5 long press SET or 10 seconds of no key activity confirmed their return to the controller.

Package included:
1x Temperature control switch

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.
Free Shipping
All order over $50.00
Money Come Back
All order over $50.00
Member Discount
All order over $50.00
24/7 Support
All order over $50.00
Gift Voucher
All order over $50.00