DC 3.7V-6V 4A 400kV 400000V High Voltage Boost Step-up Power Module Transformer

Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc

DC 3.7V-6V 4A 400kV 400000V High Voltage Boost Step-up Power Module Transformer

SKU:X13005
$5.99

 

 

Parameter:
Input: 3.7-6V 4A Input line length: about 10 cm
Output: 400KV 0.5A Line length: about 8 cm
High-voltage two-pole discharge distance: 1 cm - 2 cm
Lenth:56mm  
About input power: single 3.7V lithium battery or two series, such as 18650 battery, or nickel cadmium/nickel hydrogen battery, 4V or 6V lead acid battery, etc. (6V battery can achieve the best results)
 
 
Product instructions:
The module is divided into input and output. The red and green (white) line is the input end. The red and green (white) are negative. The two high-voltage lines with the same color are the input end. The appropriate arc distance is fixed at the output end. The input terminal is connected. The battery can generate high voltage or high temperature arcs.
 
 
Precautions:
1. The high-voltage module should be protected from high-voltage and no-load power. Before power-on, the high-voltage line end must be adjusted. The high-voltage line arcing distance is proportional to the battery voltage and capacity used.
2. When testing the arc distance, it should be tested from short to long. When the power is on, it is forbidden to exceed the longest arcing distance. Because the high voltage energy cannot be released, the module is easily damaged.
3. The power of the module is large, and the internal heat is not suitable, so it is not allowed to work for a long time.
4. The method to determine whether the battery capacity can drive the maximum output power is to measure the battery voltage during arcing. If you are around 6V, you can output the maximum power.
5. The small-capacity lithium battery is connected in series at 7.2V. The voltage measured in the arc-sampling state has dropped to about 4V. The smaller the capacity, the lower the voltage pull. Therefore, it is recommended to use more than 2000MA lithium battery, and it is better to have a battery of 4000MA or more.

 

 

 

 

 

 

trust seal
  • guaranteeQuality checked
  • Special gift cardsSpecial gift cards
  • Free return Within 60 days
  • Consultancy86-0755-85201155

 

 

Parameter:
Input: 3.7-6V 4A Input line length: about 10 cm
Output: 400KV 0.5A Line length: about 8 cm
High-voltage two-pole discharge distance: 1 cm - 2 cm
Lenth:56mm  
About input power: single 3.7V lithium battery or two series, such as 18650 battery, or nickel cadmium/nickel hydrogen battery, 4V or 6V lead acid battery, etc. (6V battery can achieve the best results)
 
 
Product instructions:
The module is divided into input and output. The red and green (white) line is the input end. The red and green (white) are negative. The two high-voltage lines with the same color are the input end. The appropriate arc distance is fixed at the output end. The input terminal is connected. The battery can generate high voltage or high temperature arcs.
 
 
Precautions:
1. The high-voltage module should be protected from high-voltage and no-load power. Before power-on, the high-voltage line end must be adjusted. The high-voltage line arcing distance is proportional to the battery voltage and capacity used.
2. When testing the arc distance, it should be tested from short to long. When the power is on, it is forbidden to exceed the longest arcing distance. Because the high voltage energy cannot be released, the module is easily damaged.
3. The power of the module is large, and the internal heat is not suitable, so it is not allowed to work for a long time.
4. The method to determine whether the battery capacity can drive the maximum output power is to measure the battery voltage during arcing. If you are around 6V, you can output the maximum power.
5. The small-capacity lithium battery is connected in series at 7.2V. The voltage measured in the arc-sampling state has dropped to about 4V. The smaller the capacity, the lower the voltage pull. Therefore, it is recommended to use more than 2000MA lithium battery, and it is better to have a battery of 4000MA or more.

 

 

 

 

 

 

Purchasing & Delivery

Before you make your purchase, it’s helpful to know the measurements of the area you plan to place the furniture. You should also measure any doorways and hallways through which the furniture will pass to get to its final destination.
Picking up at the store
Shopify Shop requires that all products are properly inspected BEFORE you take it home to insure there are no surprises. Our team is happy to open all packages and will assist in the inspection process. We will then reseal packages for safe transport. We encourage all customers to bring furniture pads or blankets to protect the items during transport as well as rope or tie downs. Shopify Shop will not be responsible for damage that occurs after leaving the store or during transit. It is the purchaser’s responsibility to make sure the correct items are picked up and in good condition.
Delivery
Customers are able to pick the next available delivery day that best fits their schedule. However, to route stops as efficiently as possible, Shopify Shop will provide the time frame. Customers will not be able to choose a time. You will be notified in advance of your scheduled time frame. Please make sure that a responsible adult (18 years or older) will be home at that time.
In preparation for your delivery, please remove existing furniture, pictures, mirrors, accessories, etc. to prevent damages. Also insure that the area where you would like your furniture placed is clear of any old furniture and any other items that may obstruct the passageway of the delivery team. Shopify Shop will deliver, assemble, and set-up your new furniture purchase and remove all packing materials from your home. Our delivery crews are not permitted to move your existing furniture or other household items. Delivery personnel will attempt to deliver the purchased items in a safe and controlled manner but will not attempt to place furniture if they feel it will result in damage to the product or your home. Delivery personnel are unable to remove doors, hoist furniture or carry furniture up more than 3 flights of stairs. An elevator must be available for deliveries to the 4th floor and above.

Other Customers also buy:

  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc High Voltage Dc-Dc Boost Converter Step Up To Output 300V-1200V 400V 900V 1000V Adjustable Power Psu
    DC-DC High Voltage Boost Converter Input 3V-5V Output 1000V Power Supply Module
    $8.99
  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc Newest Multi-Function Mini Boost Module Step Up Board 5V/8V/9V/12V 1.5A Led Indicator Diy Electronic
    1PCS 3V 3.3V 5V 9V to 12V DC-DC Mini Boost Step Up Converter Volt Regulator
    $3.99
  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc 15Kv High Frequency Dc Voltage Arc Ignition Generator Inverter Boost Step Up 18650 Diy Kit U Core
    15KV Inverter High Frequency High Voltage Generator Coil Arc Converter Boost DIY Kit
    $4.99
  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc Dc 3.3V 3.7V 5V 6V To 12V Step-Up Power Supply Boost Voltage Regulator Converter Step Up Module
    DC 3.3V 3.7V 5V 6V to 12V Step-up Power Supply Boost Voltage Regulator Converter
    $7.99
  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc 5Pcs Dc-Dc Boost Converter Step Up Module 1-5V To 5V 500Ma 600Ma Max For Arduino
    5PCS DC-DC Boost Converter Step Up Module 1-5V to 5V 500mA 600mA Max for Arduino
    $5.99
  • Dc 3V-6V To 400Kv Boost Step-Up Module High Power Voltage Generator Transformer Temperature Arc Micro Usb 5V Lithium Battery Charger Step Up Protection Board Boost Power Module Li-Po Li-Ion 18650
    Lithium Power 5V Boost Step Up Battery Charger 18650 Protection Board Module
    $4.99